Használati útmutató ATTACK Z100 PLus

ATTACK Kazán Z100 PLus

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ATTACK Z100 PLus (8 oldal) a Kazán kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
W W W . A T T A C K . S K
IndIrect heated d.h.W. storage tanks
attack Z100 PLUs
InstrUctIons For Use
2
1 PRODUCT ACCESSORIES:
WARNING: The safety valve G ¾ "is enclosed in the product. Ensure completeness of
accessories in your own interest.
2 USE OF
The stationary container is used to prepare DHW in conjunction with another source of heating
water, most often with a gas boiler. Its nominal output guarantees a sufficient amount of DHW
even for large residential units, operations, restaurants and similar facilities.
With increased DHW collection, the tank keeps the water running continuously and works
similarly to the flow heater.
3 ADVANTAGES OF USING THE STATIONARY TANK:
• Easy to install and connect to the heating water source
• Very fast hot water heating
• The enameled steel container ensures hygienic quality requirements for DHW
• Built-in magnesium anode increases resistance to corrosion
• High-quality polyurethane insulation ensures minimal heat loss
• Smoothly adjustable DHW temperature up to 80 ° C
• Connect multiple outlets
• Lighting for heater operation
• Accurate DHW temperature control
• Possibility to connect DHW circulation
4 TECHNICAL DATA
Parameter Unit Z100 Plus
Volume l 87
Weight kg 53
Exchanger area m
2
1,08
Maximum DHW overpressure MPa 0,6
Maximum tank pressure MPa 1
DHW connection Js ¾"
Connection of heating water Js 3/4"
Setting range °C Do 90
Recommended DHW temperature °C 60
Electrical coverage – IP 42
Connection voltage V/Hz ~230
/
50
Rated thermal output at a water temperature of
80 ° C and a flow rate of 720 l / h W 24000
Heating time from 10 ° C to 60 ° C min 13
Static loss W 42
3
5 POSITION AND TYPE OF ENVIRONMENT:
The container is placed on the ground next to or close to the heating water source.
All connecting wiring is best insulated. The product is recommended to be used indoors with an
air temperature of +2 ° C to +45 ° C and a relative humidity of max. 80%.
6 TECHNICAL DESCRIPTION
1 Temperature indicator
2 Spiral heat exchanger
3 Protecting tube of operating thermostat
4 Operating thermostat with external control
5 Wiring cover
6 Fill tube of cold water
7 Discharge tube of hot water
8 Enameled steel tank
9 Polyurethane CFC-free isolation 42 mm
10 Magnesium anode
11 Another outlet of hot water
12 Circulation
13 Coat of the heater
The reservoir tank is welded from steel sheet, surface-treated with a paint that resists warm
water. As an additional corrosion protection, a magnesium anode is mounted in the flange of
the container, which adjusts the electrical potential of the vessel interior and reduces the risk of
its rusting. The vessel is welded spiral exchanger made of enameled steel pipe, hot and cold
water outlets, circular opening. At the top of the container there is a flange with housing for
thermostat sensors, thermometer and anode holder. Isolation of the container forms a 40 mm
layer of polyurethane foam, the flange is protected by polystyrene. The sheath of the heater is a
steel sheet painted with white powder paint, the coupling parts are surface-treated. The whole
heater is mounted on three adjustable screws, with the possibility of equalizing floor
unevenness +10 mm. The control wiring is located in a plastic cover in the upper part of the
heater. The tank is tested at a pressure of 0.9 MPa, with exchanger pressure of 1.5 MPa.

Termékspecifikációk

Márka: ATTACK
Kategória: Kazán
Modell: Z100 PLus

Szüksége van segítségre?

Ha segítségre van szüksége ATTACK Z100 PLus, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek