Használati útmutató Atlona AT-RON-448

Atlona Vevő AT-RON-448

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atlona AT-RON-448 (8 oldal) a Vevő kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
Installation Guide
1
AT-RON-448
4K HDR Eight-Output HDMI Distribution Amplier
AT-RON-448
The Atlona Rondo™ series are HDMI distribution ampliers for high dynamic range (HDR)
formats. They are HDCP 2.2 compliant and support 4K/UHD video @ 60 Hz with 4:4:4 chroma
sampling, as well as HDMI data rates up to 18 Gbps. The Rondo series are ideal for applications
requiring the latest as well as emerging 4K/UHD and HDR sources and displays. They are
compatible with all video resolutions, audio formats, and color space formats supported in the
HDMI 2.0a specication, plus the ability to pass metadata for HDR content. The Rondo Series
HDMI distribution ampliers include EDID management features, front panel LED indicators
for power and signal status, and the capability to cascade several units without compromising
performance.
Package Contents
1 x AT-RON-448
1 x 5 V DC power supply
1 x Captive screw connector, 5-pin
2 x Rack ears
4 x Rubber feet
4 x Screws
1 x Installation guide
IMPORTANT: Visit http://www.atlona.com/product/AT-RON-448 for the latest rmware
updates.
Installation Guide
2
AT-RON-448
AT -RON-448 EDID
INT LEARN
1 2 3 4 5 6 7 8
SYNCPOWER
BM
OUT PUT
1234
DC 5V
BACKUP
DC 5V
MAINANALOG S/PDIF
HDMI IN
AT-RO N-448
FW
--
L R
++
5678
1 POWER
This M LED indicator will glow solid
red when the power supply is MAIN
connected. The LED indicator will glow B
solid red when a backup power supply
is connected to the BACKUP power
receptacle.
2 SYNC
This LED indicator will glow solid blue
when an active source is detected on the
HDMI IN port.
3 Output Indicators
These LED indicator will glow solid blue
when a display or other sink device is
connected to the ports.HDMI OUT
4 INT
This LED indicator glows solid blue when
the unit is using the built-in EDID.
5 LEARN
This LED indicator glows solid blue when
the unit is in “EDID learn” mode.
6 EDID button
Press this button to switch between
“internal” and “learn” modes.
7 FW
Connect a mini USB cable to this port to
update the rmware.
8 HDMI IN
Connect an HDMI cable from this port to a
UHD/HD source.
9 ANALOG
Connect the included 5-pin captive screw
connector to this port to de-embed the
input audio to an analog output device.
10 SPDIF
Connect an RCA-type cable from this port
to de-embed the input audio to a digital
output device.
11 HDMI OUT 1 - 8
Connect an HDMI cable from each of
these ports to a display or other sink
device.
12 DC 5V
Two power receptacles are provided:
BACKUP and MAIN. If not using power
supply redundancy, connect the included
power supply to the power MAIN
receptacle. If using a backup power
supply (not included), then connect the
backup power supply from the BACKUP
power receptacle to an electrical outlet
that is on a dierent circuit than the main
power supply. Additional power supplies
can be purchased through Atlona.
31 2 4
6
5
87 910
Panel Descriptions
11 12
Installation Guide
3
AT-RON-448
1. Connect an HDMI cable from the UHD/HD source to the port on the AT-RON-448.HDMI IN
2. Connect up to eight display/sink devices to the ports on the rear panel of the HDMI OUT
AT-RON-448.
3. OPTIONAL: Connect the included 5-pin captive screw connector from the ANALOG port to
the input of an analog output device. Refer to the wiring instructions in the diagram above.
4. OPTIONAL: Connect an RCA-type cable from the SPDIF connector to the digital input of
output device.
5. Connect the included power supply to the power receptacle.DC 5V
Installation
Analog Audio De-Embedding
The AT-RON-448 provides the ability to de-embed two-channel balanced or unbalanced analog
audio on the ANALOG port, using the included 5-pin captive screw connector. This step is
optional.
Use wire strippers to remove enough insulation to allow each wire to be securely fastened to
each terminal of the captive screw connector block and connect the wires as shown.
GND
Side View Side View
-
+
GND
+
-
NOTE: If not using power supply redundancy, connect the included power
supply to the power receptacle. If using a backup power supply (not MAIN
included), then connect the backup power supply from the BACKUP power
receptacle to an electrical outlet that is on a dierent circuit than the main power
supply. Additional power supplies can be purchased through Atlona.
1 2
3
1 2
3
GND GND
+
-+
-
Balanced
Unbalanced

Termékspecifikációk

Márka: Atlona
Kategória: Vevő
Modell: AT-RON-448

Szüksége van segítségre?

Ha segítségre van szüksége Atlona AT-RON-448, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő Atlona

Atlona

Atlona AT-VGA12A Útmutató

19 Augusztus 2024
Atlona

Atlona AT-OPUS-RX Útmutató

19 Augusztus 2024
Atlona

Atlona AT-UHD-EX-70-KIT Útmutató

19 Augusztus 2024
Atlona

Atlona AT-HDR-CAT-8 Útmutató

19 Augusztus 2024
Atlona

Atlona Gain 60 Útmutató

19 Augusztus 2024
Atlona

Atlona AT-UHD-EX-100CE-KIT Útmutató

19 Augusztus 2024
Atlona

Atlona AT-UHD-EX-100CE-TX Útmutató

19 Augusztus 2024
Atlona

Atlona AT-GAIN-120 Útmutató

19 Augusztus 2024
Atlona

Atlona AT-PA100-G2 Útmutató

19 Augusztus 2024
Atlona

Atlona AT-RON-448 Útmutató

19 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025