Használati útmutató ART TPS II

ART Vevő TPS II

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ART TPS II (18 oldal) a Vevő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/18

- 1 -

IMPORTANT SAFETY INSTRUCTION – READ FIRST

This symbol, whenever it appears, This symbol, wherever it appears, alerts

alerts you to the presence of uninsulated you to important operating and maintenance

dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.

that may be sufficient to constitute a risk of shock. Read manual.

Read instructions:

Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment.

Follow the operating instructions printed in this user guide.

Do not open:

There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.

Power sources:

Connect the unit to mains power only of the type described in this user guide or marked on the rear panel. The power

source must provide a good ground connection.

Power cord:

Use the power cord with sealed mains plug appropriate for your local main supply as provided with the equipment. If the

provided plug does not fit into you outlet consult your service agent. Route the power cord so that it is not likely to be

walked on, stretched or pinched by items placed upon or against.

Grounding:

Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the ground

connection on the power cord.

Ventilation:

Do not obstruct the ventilation slots or position the unit where the air required for ventilation is impeded. If the unit is to be

operated in a rack, case or other furniture ensure that it is constructed to allow adequate ventilation.

Moisture:

To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do

not place container of liquid on it, which may spill into any openings.

Heat:

Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit

away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.

Environment:

Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and

smoke, especially that associated with smoke machines.

Handling:

To prevent damage to the controls and cosmetics avoid rough handling and excessive vibration. Protect the controls form

damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to yourself or damage to the

equipment take care when lifting, moving or carrying the unit.

Servicing:

Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen

into opening, the power cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted. Refer

servicing to qualified technical personnel only.

Installation:

Install the unit in accordance with the instruction printed in the user guide.

- 2 -

The ART TPS II





Tube Preamp System

INTRODUCTION ..................................................................................................................................3

TPS II



 FEATURES: ...........................................................................................................................4

INSTALLATION....................................................................................................................................5

AC Power Hookup.....................................................................................................................5

Audio Connections ....................................................................................................................5

CONTROLS & INDICATORS ........................................................................................ 6

Input control ..............................................................................................................................6

+20db gain switch .....................................................................................................................6

Input Impedance Control...........................................................................................................6

TPS II™ Front Panel Features Diagram..........................................................................................7

Phantom power +48v switch .....................................................................................................7

Phase reverse switch.............................................................................................................7-8

V3 – Variable Valve VOICING Control................................................................................8

LED Input Meter........................................................................................................................9

VU METER ...............................................................................................................................9

OUTPUT control .....................................................................................................................10

CONNECTIONS .................................................................................................................................11

Rear Input Jacks .....................................................................................................................12

XLR Output Jacks (Rear)........................................................................................................12

¼” Output Jacks (Rear)...........................................................................................................12

TPS II





signal Flow Diagram..........................................................................................................13

OPERATION.......................................................................................................................................14

Neutral Settings: .....................................................................................................................14

Warm Settings with OPL: ........................................................................................................14

Neutral Settings with OPL: ......................................................................................................14

Using V3: .............................................................................................................................15

WARRANTY INFORMATION ...................................................................................... 16

SERVICE ............................................................................................................................................17

TPS II



 SPECIFICATIONS................................................................................................................18