Használati útmutató ART SLA-1

ART Vevő SLA-1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ART SLA-1 (13 oldal) a Vevő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/13
- 1 -
The ART
SLA-1 Studio Linear Amplifier
TABLE OF CONTENTS
Safety Precautions ................................................................................ 2
Introduction ........................................................................................... 3
Installation ............................................................................................. 4
AC Power Hookup ............................................................................... 4
Audio Connections .............................................................................. 4
Operation Precautions ........................................................................ 4
Controls and Indicators ......................................................................... 5
Power Switch ....................................................................................... 5
Channel Attenuators ........................................................................... 5
Signal LED Indicator ........................................................................... 5
Clip LED Indicator ............................................................................... 5
Protect LED Indicator .......................................................................... 5
Connections ........................................................................................... 6
¼” Input Jacks....................................................................................... 6
XLR Input Jacks .................................................................................. 6
Amp Mode Switch ............................................................................... 7
Output Binding Post ............................................................................ 7
SmartFan™ ......................................................................................... 7
Fuse .................................................................................................... 8
AC Power Input ................................................................................... 8
Ground Lift Switch ............................................................................... 8
Operation ............................................................................................... 9
Warranty Information .......................................................................... 11
Service .................................................................................................. 12
SLA-1 Specifications ........................................................................... 13
- 2 -
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Read manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment.
Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Connect the unit to mains power only of the type described in this user guide or marked on the rear panel. The power
source must provide a good ground connection.
Power cord:
Use the power cord with sealed mains plug appropriate for your local main supply as provided with the equipment. If the
provided plug does not fit into you outlet consult your service agent. Route the power cord so that it is not likely to be
walked on, stretched or pinched by items placed upon or against.
Grounding:
Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the ground
connection on the power cord.
Ventilation:
Do not obstruct the ventilation slots or position the unit where the air required for ventilation is impeded. If the unit is to be
operated in a rack, case or other furniture ensure that it is constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do
not place container of liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit
away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and
smoke, especially that associated with smoke machines.
Handling:
To prevent damage to the controls and cosmetics avoid rough handling and excessive vibration. Protect the controls from
damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to yourself or damage to the
equipment take care when lifting, moving or carrying the unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen
into opening, the power cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted. Refer
servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instruction printed in the user guide.
- 3 -
INTRODUCTION
Thank you for purchasing an ART SLA-1 Studio Linear Amplifier - and
congratulations: you now own one of the most versatile amplifiers available.
Offering a superb level of sound quality, the SLA-1’s clean and powerful
circuitry combined with a straightforward user interface quickly and easily
delivers the power you need for professional and project studio monitoring.
FEATURES:
• Studio Linear Amplifier
• Extremely Low Noise, Discrete Linear Design
• 100 Watts/Channel @ 8 Ohms
• 260 Watts/Bridged Mono @ 8 Ohms
• Toroidal Transformer
• 10 Hz to 40 kHz within 1dB
• XLR & ¼” Inputs
• Ground Lift Switch
• Silent, Thermal Dependent Cooling System
• Multi-Way Binding Post Outputs
• Low Profile 1U Rackmountable Design
• All Steel and Aluminum Chassis
• Perfect for Pro and Project Studios

Termékspecifikációk

Márka: ART
Kategória: Vevő
Modell: SLA-1

Szüksége van segítségre?

Ha segítségre van szüksége ART SLA-1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő ART

ART

ART Precision Phono Pre Útmutató

16 Szeptember 2024
ART

ART USB Phono Plus Útmutató

9 Szeptember 2024
ART

ART Digital MPA II Útmutató

9 Szeptember 2024
ART

ART MPA Gold Útmutató

17 Augusztus 2024
ART

ART TUBE MP Project Series Útmutató

3 Augusztus 2024
ART

ART DJ Pre II Útmutató

2 Augusztus 2024
ART

ART TransX Útmutató

1 Augusztus 2024
ART

ART Tube MP Studio V3 Útmutató

30 Július 2024
ART

ART SLA-1 Útmutató

21 Július 2024
ART

ART TubeOpto 8 Útmutató

20 Július 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025