Használati útmutató Argon SUB840

Argon hangszóró SUB840

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Argon SUB840 (7 oldal) a hangszóró kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
w w w . a r g o n a u d i o . c o m 1
SUB840
02 OWNER’S MANUAL
05 ILLUSTRATIONS
07 SPECIFICATIONS
07 TROUBLESHOOT
w w w . a r g o n a u d i o . c o m 2
SUB840
Owner ’s manual
Dear Customer,
Quality has always been our driving force and founding
Argon Audio is a natural extension of this philosophy.
We have 20 years’ experience in creating and specifying
high quality products, manufacturing them and selling them
on to end users with Value-for-Money as the primary aim.
And Argon Audio is a brand fully compliant with these
values.
Design, features and quality standards are all specified in
Denmark and manufacturing takes place in the Far East,
where quality vendors are highly competitive - and as a
result supply outstanding Value-for-Money products
– to the delight of both ourselves and our customers!
Introduction
Thank you for choosing Argon Audio Subwoofer, we hope it
will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Argon SUB840 is manufactures with a no-nonsense
approach. 840A is without any unnecessary gimmicks, bling
bling or fancy features. The money is spent on quality
components, efficient woofer driver and extremely solid
cabinet. Quality features you only see on products twice the
price of an Argon SUB840.
Unpacking
We have during production and packing carefully checked
and inspected this Subwoofer.
After unpacking please check for any damage from
transport.
We recommend that you keep the original carton box and
packing material for any future shipping.
Subwoofer installation
The Subwoofer requires connection to the mains power
supply, so for your safety it is important that you read both
this manual and the amplifier manual before connecting.
Subwoofer positioning
Variations in placement of loudspeakers can produce
dramatic differences in the way music sounds. No listening
room is the same and therefore we encourage you to spend
some time experimenting with which placements work best
in your listening room. Positioning of Subwoofers is
however less critical compared with full-range loudspeakers
because the low frequencies reproduced by a subwoofer
can be difficult to locate in the room. You can start with our
basic recommendations.
To begin with, if you use the Subwoofer in a surround set-
up, the Subwoofer should ideally be positioned between the
TV and one of your front loudspeakers, as fig. 2 to 4 on
page 6. If you are using the Subwoofer in a stereo set-up
the Subwoofer should ideally be positioned between the two
front stereo speakers, as fig.1on page 6.
You should know that, if the Subwoofer is placed close to a
wall or in a corner, the bass sound will be enhanced.
It’s your choice what you like the most. Another example is
the placement of the Subwoofer in the middle of the stereo
w w w . a r g o n a u d i o . c o m 3
SUB840
speakers or away from the center of the stereo speakers.
This may have an impact on how you perceive the stereo
image, even though its only low frequency sounds that
come from the Subwoofer.
Trust your ears and be willing to experiment freely.
(Almost) everything is possible ☺
Running-in period
We recommend a running-in time of your new SUB840
Subwoofer of approximately 15-20 hours at normal listening
level before you decide on the final positioning and control
settings of the Subwoofer. During the running-in time the
drive units will settle in and perform as intended.
Connecting your Subwoofer
We recommend that you read the manual of your Amplifier
or AV-receiver carefully before connecting your Subwoofer.
First switch off the Amplifier and all equipment before you
connect the Subwoofer.
If your Amplifier/av-reciever has a SUB-OUT or PRE-OUT
function: Connect the Subwoofer input IN (10) as shown on
page 5 and your Amplifiers/av-recievers SUB-OUT or PRE-
OUT with a RCA/phono cable.
If your Amplifier does NOT have a SUB-OUT or PRE-OUT
function:
Connect the speaker cables from the Amplifier to the
Subwoofer (8) left/right, +/- as shown on page 5. Then
connect the satellite speakers to the Subwoofer using (7)
left/right, +/- as shown on page 5.
When finished connect the subwoofer net cable (6) as
shown on page 5 to the mains voltage, and push the
POWER ON/OFF button (4) as shown on page 5 to ON
position, the indicator lamp POWER LED will now glow blue
and the Subwoofer is active and ready to be used.
The Argon SUB840 Subwoofer has a built-in AUTO
STANDBY function and after approximately 10 minutes
without any input signal the subwoofer will automatically
switch off, and the indicator lamp POWER LED will change
color. When an input signal is detected the subwoofer will
become active and the indicator lamp POWER LED will
glow blue.
Setting volume, frequency and phase
The volume, crossover and phase (controls 1, 2 and 3 on
page 4-5 ) can be adjusted on the rear panel, and we
recommend that you adjust the setting of these controls to
your liking – try with different music and films. If you want
more detailed information on these control functions, we
invite you to visit our homepage www.argonaudio.com.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Argon SUB840 cabinet, the cabinet surface usually only
requires dusting or cleaning with a damp soft cloth
(only use cold clean water).
The grille fabric may be cleaned with a normal clothes brush
or vacuumed carefully with the grille detached from the
cabinet. Avoid touching the drive unit, and do not use the
Subwoofer as a coffee or drinks table (risk of water being
spilled into the subwoofer).
Disconnect the Subwoofer from the mains supply if taken
out of use for a longer period.

Termékspecifikációk

Márka: Argon
Kategória: hangszóró
Modell: SUB840

Szüksége van segítségre?

Ha segítségre van szüksége Argon SUB840, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Argon

Argon

Argon Fenris A55 Útmutató

11 Augusztus 2024
Argon

Argon Forte A55 MK2 Útmutató

9 Augusztus 2024
Argon

Argon Forte A4 MK2 Útmutató

31 Július 2024
Argon

Argon Fenris A5 Útmutató

29 Július 2024
Argon

Argon Forte A5 MK2 Útmutató

27 Július 2024
Argon

Argon SUB10 Útmutató

14 Július 2024
Argon

Argon 6355FS Útmutató

12 Július 2024
Argon

Argon Octave 4A Útmutató

3 Július 2024
Argon

Argon FORTE A4 Útmutató

2 Július 2024
Argon

Argon Bass 12 Útmutató

1 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Celly

Celly Ultraboost Útmutató

1 Április 2025
Muse

Muse MC-50 WI Útmutató

1 Április 2025
QSC

QSC MD-FP152-124r Útmutató

30 Március 2025
QSC

QSC PL-CA6 Útmutató

30 Március 2025
QSC

QSC PL-SUB15 Útmutató

30 Március 2025
QSC

QSC PL-SUB10 Útmutató

30 Március 2025
QSC

QSC MD-FP152-64r Útmutató

30 Március 2025
QSC

QSC PL-SUB12 Útmutató

30 Március 2025
Audac

Audac ARCHI210 Útmutató

30 Március 2025
Audac

Audac ARCHI10 Útmutató

30 Március 2025