Használati útmutató Aqara Presence Sensor FP2

Aqara okos otthon Presence Sensor FP2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Aqara Presence Sensor FP2 (23 oldal) a okos otthon kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/23
Presence Sensor FP2 User Manual
Please read this manual carefully and keep it in a safe place.
The Presence Sensor FP2 features zone positioning, multi-person detection, and fall detection.
Capable of detecting presence or absence, falls, entries, exits, approach, departure, and
illuminance, it supports real-time tracking of multiple targets and zone settings. The FP2's
powerful features can also be used within third-party automation systems: multiple sensors are
exposed to HomeKit (and Home Assistant), Alexa, Google Home and more without needing a hub.
1. The fall detection results are for reference only. The product cannot fully replace medical devices
and may not accurately recognize slow tumbles or gradual falls while leaning against a wall.
Additionally, rapidly falling or shaking objects could trigger false fall detection alerts.
2. Avoid placing this product near a heat source.
3. Refrain from attempting self-repairs. All repairs should be conducted by professionals.
*This device requires to be used with the Aqara Home app.
*If local automation is needed, this product should be used with a Hub with Wi-Fi Local Automation features.
Product Introduction
Warnings
Sensor
Indicator LED, Light Sensor
Reset Button
USB-C to USB-A Cable
Base
Metal Plate
Sticker
Notice
Use of the Works with Apple badge means that an accessory has been designed to work specifically
with the technology identified in the badge and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
Device Discription
Actions Description LED indicator
Device
power-on
Press the Reset
button for more
than 10s
1. If the device had been connected to a
network previously, the LED indicator is
as shown on the right.
2. If the device is not connected to a
network, it enters the networking mode.
The yellow indicator flickers quickly: Enter
the networking mode.
The white indicator is normally on: Failure
to connect to the router/AIOT
The blue indicator flickers quickly: Connect
to the router
The blue indicator flickers slowly: Connect
to AIOT
No indicator is on: The device is connected
successfully, and can work normally.
Reset the device. Aer successful reset, the
device will be restarted automatically and
enter the networking mode.
The yellow indicator flickers quickly
Press the Reset
button for 10
times
successively
Restore factory settings and reset the device
to enter the networking mode. The yellow indicator flickers quickly

Termékspecifikációk

Márka: Aqara
Kategória: okos otthon
Modell: Presence Sensor FP2

Szüksége van segítségre?

Ha segítségre van szüksége Aqara Presence Sensor FP2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók okos otthon Aqara

Útmutatók okos otthon

Legújabb útmutatók okos otthon

Tesla

Tesla MS360 Útmutató

29 Március 2025
Sommer

Sommer SOMweb Útmutató

19 Március 2025
EZVIZ

EZVIZ T33 Útmutató

18 Március 2025
Niko

Niko 350-20071 Útmutató

15 Január 2025
WiZ

WiZ Smart Útmutató

14 Január 2025
EZVIZ

EZVIZ DL03 Útmutató

14 Január 2025
EZVIZ

EZVIZ DL04 Pro Útmutató

14 Január 2025