Használati útmutató Amprobe ACD-6-PRO
Amprobe
Mérőberendezések
ACD-6-PRO
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Amprobe ACD-6-PRO (15 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/15
USER'S
MANUAL
ACD-6 Pro
ACD-6 TRMS Pro
Versatile Clamp-on
Multimeter Series
1
1) SAFETY
This manual contains information and warnings that must be followed for operating the
instrument safely and maintaining the instrument in a safe operating condition. If the
instrument is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired.
The meter meets the requirements for double insulation to IEC61010-2-032(1994),
EN61010-2-032(1995), UL3111-2-032(1999):
Category III 600 Volts AC and DC.
PER IEC61010 OVERVOLTAGE INSTALLATION CATEGORY
OVERVOLTAGE CATEGORY II
Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be
supplied from the fixed installation.
Note – Examples include household, office, and laboratory appliances.
OVERVOLTAGE CATEGORY III
Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.
Note – Examples include switches in the fixed installation and some equipment for
industrial use with permanent connection to the fixed installation.
OVERVOLTAGE CATEGORY IV
Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the
installation. Note – Examples include electricity meters and primary over-current
protection equipment.
TERMS IN THIS MANUAL
• WARNING identifies conditions and actions that could result in serious injury or
even death to the user.
• CAUTION identifies conditions and actions that could cause damage or
malfunction in the instrument.
2
WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. The meter is intended only for indoor use.
To avoid electrical shock hazard, observe the proper safety precautions when working
with voltages above 60 VDC or 30 VAC rms. These voltage levels pose a potential
shock hazard to the user.
Inspect test leads, connectors, and probes for damaged insulation or exposed metal
before using the instrument. If any defects are found, replace them immediately.
Do not touch test lead tips or the circuit being tested while power is applied to the
circuit being measured. To avoid accidentally short circuit of bare (uninsulated)
hazardous live conductors or busbars, switch them off before insertion and removal of
the current clamp jaws. Contact with the conductor could result in electric shock. Keep
your hands/fingers behind the hand/finger barriers that indicate the limits of safe
access of the meter and the test leads during measurement.
CAUTION:
Disconnect the test leads from the test points before changing meter functions.
INTERNATIONAL ELECTRICAL SYMBOLS
!
!
!
!! Caution ! Refer to the explanation in this Manual
Caution ! Risk of electric shock
Earth (Ground)
Double Insulation or Reinforced insulation
Fuse
AC--Alternating Current
DC--Direct Current
2) CENELEC Directives
The instruments conform to CENELEC Low-voltage directive 73/23/EEC and
Electromagnetic compatibility directive 89/336/EEC
Termékspecifikációk
Márka: | Amprobe |
Kategória: | Mérőberendezések |
Modell: | ACD-6-PRO |
Szüksége van segítségre?
Ha segítségre van szüksége Amprobe ACD-6-PRO, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Mérőberendezések Amprobe
26 Szeptember 2024
24 Július 2024
17 Július 2024
17 Július 2024
8 Július 2024
Útmutatók Mérőberendezések
- Mérőberendezések PeakTech
- Mérőberendezések Milwaukee
- Mérőberendezések Pioneer
- Mérőberendezések Bosch
- Mérőberendezések Panasonic
- Mérőberendezések Einhell
- Mérőberendezések Voltcraft
- Mérőberendezések Vimar
- Mérőberendezések Flex
- Mérőberendezések Clean Air Optima
- Mérőberendezések ORNO
- Mérőberendezések Be Cool
- Mérőberendezések SHX
- Mérőberendezések Reely
- Mérőberendezések GW Instek
- Mérőberendezések Owon
- Mérőberendezések Mitsubishi
- Mérőberendezések Gossen Metrawatt
- Mérőberendezések Güde
- Mérőberendezések Eastron
- Mérőberendezések Omnitronic
- Mérőberendezések Klein Tools
- Mérőberendezések Chauvin Arnoux
- Mérőberendezések Dahua Technology
- Mérőberendezések Black & Decker
- Mérőberendezések Beha-Amprobe
- Mérőberendezések Albrecht
- Mérőberendezések Livington
- Mérőberendezések Joy-It
- Mérőberendezések Eberle
- Mérőberendezések Extech
- Mérőberendezések Testo
- Mérőberendezések BaseTech
- Mérőberendezések ProfiCare
- Mérőberendezések Kübler
- Mérőberendezések Grohe
- Mérőberendezések BENNING
- Mérőberendezések Kogan
- Mérőberendezések Alecto
- Mérőberendezések Honeywell
- Mérőberendezések Pico
- Mérőberendezések Yato
- Mérőberendezések Velleman
- Mérőberendezések TFA
- Mérőberendezések Monacor
- Mérőberendezések Shimano
- Mérőberendezések Janitza
- Mérőberendezések Trotec
- Mérőberendezések Fluke
- Mérőberendezések Uni-T
- Mérőberendezések Rossmax
- Mérőberendezések Metrix
- Mérőberendezések Finder
- Mérőberendezések TDE Instruments
- Mérőberendezések Megger
- Mérőberendezések Pyle
- Mérőberendezések Testboy
- Mérőberendezések DeWalt
- Mérőberendezések Laica
- Mérőberendezések IFM
- Mérőberendezések Wachendorff
- Mérőberendezések Greisinger
- Mérőberendezések Sonel
- Mérőberendezések Kyoritsu
- Mérőberendezések Danfoss
- Mérőberendezések Vemer
- Mérőberendezések Emko
- Mérőberendezések Siig
- Mérőberendezések Stabila
- Mérőberendezések GoClever
- Mérőberendezések Soler & Palau
- Mérőberendezések Multimetrix
- Mérőberendezések Carrier
- Mérőberendezések Camille Bauer
- Mérőberendezések H-Tronic
- Mérőberendezések Victron Energy
- Mérőberendezések AREXX
- Mérőberendezések AS Schwabe
- Mérőberendezések Eltako
- Mérőberendezések Weidmüller
- Mérőberendezések Adwa
- Mérőberendezések Ermenrich
- Mérőberendezések Laserliner
- Mérőberendezések Kern
- Mérőberendezések Megasat
- Mérőberendezések Hikmicro
- Mérőberendezések Siglent
- Mérőberendezések Kopp
- Mérőberendezések Hazet
- Mérőberendezések Elgato
- Mérőberendezések Ideal
- Mérőberendezések Fysic
- Mérőberendezések Toolland
- Mérőberendezések Meec Tools
- Mérőberendezések ABB
- Mérőberendezések Perel
- Mérőberendezések Flir
- Mérőberendezések Technoline
- Mérőberendezések Goobay
- Mérőberendezések Hager
- Mérőberendezések IHealth
- Mérőberendezések Eizo
- Mérőberendezések Comark
- Mérőberendezések Bruder Mannesmann
- Mérőberendezések RIDGID
- Mérőberendezések Westfalia
- Mérőberendezések Muller
- Mérőberendezések TFA Dostmann
- Mérőberendezések Werma
- Mérőberendezések Peak
- Mérőberendezések X-Rite
- Mérőberendezések Entes
- Mérőberendezések KS Tools
- Mérőberendezések Trumeter
- Mérőberendezések Aeros
- Mérőberendezések Delta Ohm
- Mérőberendezések Aqua Master Tools
- Mérőberendezések MGL Avionics
- Mérőberendezések PCE Instruments
- Mérőberendezések CEM
- Mérőberendezések Hameg
- Mérőberendezések CESYS
- Mérőberendezések Circutor
- Mérőberendezések Duro Pro
- Mérőberendezések Zircon
- Mérőberendezések BJZ
- Mérőberendezések Johnson Level
- Mérőberendezések GMW
- Mérőberendezések Oscium
- Mérőberendezések Sanwa
- Mérőberendezések Condtrol
- Mérőberendezések MSW
- Mérőberendezések Qubino
- Mérőberendezések Lascar Electronics
- Mérőberendezések HT Instruments
- Mérőberendezések P3 International
- Mérőberendezések Beckmann & Egle
- Mérőberendezések Seek Thermal
- Mérőberendezések INFICON
- Mérőberendezések Motrona
- Mérőberendezések Blebox
- Mérőberendezések Seaward
- Mérőberendezések HOZO Design
- Mérőberendezések Corentium
- Mérőberendezések GQ
- Mérőberendezések Tektronix
- Mérőberendezések Dostmann Electronic
- Mérőberendezések SecuTech
- Mérőberendezések NetPeppers
- Mérőberendezések SensoProtect
- Mérőberendezések Water-i.d.
- Mérőberendezések ZKETECH
- Mérőberendezések LabNation
- Mérőberendezések Electronics International
- Mérőberendezések Cliff
- Mérőberendezések ClimeMET
- Mérőberendezések Fixpoint
- Mérőberendezések AkYtec
- Mérőberendezések Stahlwille
- Mérőberendezések Enda
- Mérőberendezések Noyafa
- Mérőberendezések Stamos
Legújabb útmutatók Mérőberendezések
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024