Használati útmutató AmpliVox SW660

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AmpliVox SW660 (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
User Guide
SW660 / SW662
Quad Horn Hailer PA System
Thank you for choosing the from SW660 / SW662 Wireless Hailer PA System AmpliVox Portable Sound
Systems.
We are excited in introducing this truly unique system. Our system combines flexibility with functionality.
Please refer to this user guide as you enjoy the unique capabilities of another quality product from Am-
pliVox Portable Sound Systems.
We encourage you to visit our website to register your product for its warranty coverage, www.ampli.com
sign up to receive our newsletter, download our catalog, and learn more about the complete line of Am-
pliVox audio visual products, including portable PA systems, and lecterns.
AmpliVox 650 Anthony Trail Suite D, Northbrook, IL 60062 Phone: (800)267- 5486 Fax: (800)267-5489 www.ampli.com
2
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety information. Please retain this manual for
future reference and warranty information.
Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not at-
tempt to modify the device in anyway. Doing so could invalidate your warranty.
Cleaning
When cleaning the device, please use a soft, dry cloth. Never use benzene, paint thinner, or other chemicals on the -
device.
Location
Place the device in stable location, so it will not fall causing damage to the device or bodily harm.
Intended use
The product may only be used with the original parts intended for it. The intended use includes adherence to the speci-
fied installation instructions. The manufacturer accepts no liability for damage arising due to improper use.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance instructions in this owner’s guide.
IMPORTANT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.
The unit’s circuitry may cause interference to nearby radios. To prevent interference, either switch the unit off or move
away from the affected radio.
NOTE: This equipment complies within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
NOTE: Shielded cables may be required to be used with this unit to en sure compliance with the Class B FCC limits.-
3
Battery Power
1. The amp uses 10 " D " size Alkaline batteries
(not included); or the optional rechargeable Am-
pliVox NiCad Battery Pack (S 1465) and (S1460) -
AC adapter purchase separately (Fig 3).-
2. The removable battery door on the back of the
amp is designed to stay closed until you need to
change the batteries. Slip a finger nail under it and
slide it out. (Fig 1)
3. Lift the battery holder out. The plastic dividers
between the batteries help prevent battery corro-
sion. (Fig 2)
4. Install 10 fresh Alkaline " D" size batteries. Be
sure to observe the polarity when putting batteries
in the battery compartment. The negative (flat)
ends go against the springs. (Fig 2) Carefully re-
place battery holder. Batteries should look like they
are standing up.
DO NOT MIX BATTERY TYPES OR
ATTEMPT TO RECHARGE ALKA-
LINE BATTERIES. EQUIPMENT
DAMAGE, SAFETY HAZARD OR
FIRE COULD RESULT.
Note: The battery holder cable comes from the
factory already plugged into the connector. If it
comes loose, push it in securely. (Turn the plug
over if it doesn’t fit; it only fits one way.)
5. Slide door back into place.
6. If using the S 1465 NiCad Battery pack (Fig 3), -
Plug AC Adapter/ Recharger power supply (S1460)
into the jack on front panel of the amp. “DC IN”
Plug into a working electrical outlet. Charge 24
hours for full charge before using.
Wireless Transmitter
The wireless headphone transmitter bodypack is
operated by 1 "AA" alkaline battery. Before use, -
install battery as shown (Fig. 4). Make certain the
battery is fully seated in its compartment so the
cover slides in place easily. Battery life with alkaline
batteries is approximately 8 hours of operating
time. When LED on top panel turns to the bat-RED
tery should be replaced immediately.
Fig 4
Fig 3
Fig 2
Fig 1
S 1465 S 1460- -
INSTALL BATTERIES
4
1. Power Switch.
2. Power Indicator Light. Turns red when
power is turned on.
3. Mic Volume Control. This knob con-
trols output loudness to all 3 microphone
inputs and Siren.
4. Dynamic Mic Jack. Dynamic is one
kind of microphone. AmpliVox’s wired,
hand- held microphone is this type.
5. Auxiliary Volume Control. This vol-
ume knob controls the auxiliary volume
separately from the microphone volume.
6. Tone Control. This knob controls the
tone of the auxiliary input. Turn counter-
clockwise for more bass or clockwise for
more treble. (The mic jacks don’t need a
tone control because they have been pre-
optimized for the human voice.
7. Left & Right Speaker Jacks. Two sepa-
rately amplified speaker jacks allow you to
use one or two speakers for additional
sound power or true stereo output.
8. Line Out Jack. Can be used with a tape
recorder The Line Out Jack outputs all the
sound from the 3 microphone inputs and the
auxiliary input.
9. Auxiliary Line In Jack. To play music,
just plug in your CD player, MP3 player or
Amplivox’s Bluetooth Receiver.
10. Wireless Mic Jack. Optional second
wireless receiver goes here. Then plug Am-
pliVox’s lapel or headset microphone into
the transmitter. Now you are hands free -
anywhere within a 300 foot radius of the -
receiver.
11. Condenser Mic Jack—with phantom
power. If you don’t know what phantom
power is, then you don’t need to know, but a
condenser microphone won’t work without it.
If you have AmpliVox’s lapel or headset
microphone, plug it in here.
12. Aux Out. For optional 12 15 volt -
accessory.
13. DC In Jack. Used for the 12V
Battery Cable, 12V Power Plug or the
optional International AC Adapter/
Recharger, plug it in here. Plug the
other end into a wall / floor outlet.
14. Wireless ON/OFF Switch
Switches power on to the built in 16 -
channel wireless receiver.
15. Wireless 16 Channel Selector
Channel that you select here must
match with the channel that is select-
ed on the bodypack microphone
transmitter.
16. Wireless 16 Channel UHF
Bodypack Microphone Transmitter.
Connect Lapel or Headset micro-
phone to jack on top panel.MIC
15. Wireless 16 Channel Selector (left
side of case)—rotate knob to select wire-
less channel on the built in receiver. RF LED -
will light up when receiving signal from
transmitter.
16. Wireless 16 Channel
UHF Bodypack Microphone
Transmitter
Wireless Receiver Features
AMPLIFIER FEATURES
1. Power Switch
2. Power Indicator Light
3. Mic Volume-
controls all 3 mic
inputs
4. Dynamic Mic
Jack1/4 ″ for
wired, hand-held
mic.
5. Auxiliary Volume
controls the auxiliary
input separately from the
mic volume
6. Tone Control
for auxiliary input; counter-
clockwise for more bass; clock-
wise for more treble
7. Left & Right
Speaker Jacks 1/4
8. Line Out3.5mm
record your presentation
with a tape recorder or a
computer sound card
9. Auxiliary Line In
3.5mm add music with a
tape player, CD or MP3
player
10. Wireless Mic
Jack -3.5mm for
optional wireless
receiver
11. Condenser
Mic Jack 3.5mm -
for lapel or headset
mic
12. Aux Out
- for optional
12-15 volt
accessory.
13. DC In Jack
plug in optional Universal
AC Adapter/ Recharger for
power.
14. Wireless ON/OFF Switch
Channel selected must match
15.
5
SPEAKER SET-UP
To Operate:
Insure that both speakers are plugged into the “LEFT / RIGHT SPEAKERjacks . If using a wired handheld microphone, plug it into
the jack. Turn amplifier on. Turn microphone on and talk into microphone. Rotate control knob to obtain de-“DYNAMIC” “VOLUME”
sired loudness level.
If using the wireless microphone; the wireless receiver has a separate “ switch and is located just below main power switch ON-OFF”
of amplifier. Slide to position. Insure both transmitter and receiver are on the same frequency channel. On the S1690T wireless “ON”
transmitter, move the power switch to on side of amplifier will light, meaning that it is receiving signal. If does “ON”. RF LED RF LED
not light, check channel numbers.
Speaker Connection (as shown above)
Use one “Y” connector and plug into the two wires coming from the speakers. Do for both set of speakers. Now take a 40 Ft. speak-
er cable and plug one end into the “Y” adapter and the other end into the speaker jack on front panel.“LEFT / Right”
S1690T WIRELESS MICROPHONE TRANSMITTER:
Rotate the ( ) on the wireless microphone transmitter to the same channel selected on receiver (Channel Selector Switch B A).
Belt clip on the back of the unit clips the transmitter onto a belt or the transmitter simply can be put into a pocket. Plug the lapel / head-
set microphone into the ( ). The lapel microphone can be clipped to a necktie or other clothing, using the supplied Mic Input Jack C
clip. The lapel mic should be placed under the chin, as close to the center of the body as possible. Slide the power switch ON/OFF
( )D to the position (the LED indicator light will illuminate). If you are on the same channel numbers, the LED light on the side pan-ON
el ( ) of the amplifier will light.A
SW805A INTERNAL WIRELESS MICROPHONE RECEIVER:
Select channel (1 16) on panel ) Channel number should match -(A .
channel number on wireless microphone transmitter. Use supplied
screwdriver to select channel number.
Channel Selector Top Panel
S1690T Microphone
Transmitter
B
C D
A
B
6
PROBLEM SOLVING
HOWLBACK is the howl or screech often heard in sound reinforcement systems. It is caused by sound from the loudspeaker re-
turning to the microphone. AmpliVox systems utilize proven acoustical principles to minimize this; however, there is no way to com-
pletely eliminate howl back under conditions of high amplification. If howl back occurs, check the following:
User’s hand covering the head of the microphone. [Hold microphone under head slots.] Sound can easily re enter microphone. -
Keep loudspeaker turned toward audience. Note: sound can be reflected from a hard surface back through the microphone. [Turn
speaker.]
User holding microphone in a reflecting position. [Turn microphone.]
Volume setting too high. [Reduce microphone channel volume; compensate by speaking louder or closer to the microphone.]
NO SOUND
Make sure amplifier switch is turned on and red LED is lit. If switch is on and LED is not lit, check to see that batteries are POWER
properly connected and at full charge. If using optional power adapter, check to see that front panel connector is properly seated,
and verify that the power source is live.
WARRANTY
Limited Six (6) Year Warranty-
AmpliVox warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a peri-
od of six (6) years from the date of purchase (“Warranty Period”).
During the Warranty Period, AmpliVox will repair or replace (at AmpliVox’s discretion) this product or any defective parts (“Warranty
Service”).
Repair or replacement under the terms of this warranty does not give right to any extension or a new beginning of the period of war-
ranty.
CLAIMS UNDER THE WARRANTY
To obtain Warranty Service, to be assigned a After receiv-contact AmpliVox (800 5486) -267-Return Authorization number (RA#).
ing a RA#, the defective unit is to be returned to AmpliVox in either its original packaging or packaging affording an equal ree of deg
protection. You will bear the cost of shipping the product to AmpliVox. If the product is covered by the warranty, AmpliVox w bear ill
the cost of shipping product back to you after the completion of service under this warranty.
Return shipping will be charged to you for products not covered by the warranty or requiring no warranty repair.
The following information must be presented to obtain Warranty Service: the RA# must be clearly and legibility marked on the (a)
outside of shipping carton, proof of purchase, which clearly indicates the name and address of the seller, the date of purchase (b)
and the product type, which is evidence that this product is within the Warranty Period. Please further include your return address, (c)
(d) (e) daytime telephone number, and reason for return.
LIMITATION OF WARRANTY
This warranty is only valid for the original purchaser and will automatically terminate prior to expiration if this product is sold or other-
wise transferred to another party. The warranty provided by AmpliVox in this statement applies only to products purchased for e, us
and not for resale. It does not apply to open box purchases, which are sold “as is” and without any warranty. Specifically exempt from
warranty are limited life consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions, -
modular plugs, ear tips, decorative finishes, batteries, and other accessories. This warranty is invalid if the factory applied serial num--
ber, date code label, or product label has been altered or removed from this product. This Warranty does not cover cosmetic damage
or damage due to misuse, abuse, negligence, Acts of Nature, accident, disassembling or modification of, or to any part of, the prod-
uct. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone
other than AmpliVox. Any unauthorized repairs will void this warranty.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUM-
ER. AMPLIVOX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EX-
PRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHAT SOEVER, INCLUDING BUT NOT LIM-
ITED TO THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
NOTE! This warranty gives you specific legal rights. You may have other rights which vary from location to location. Some jurisdic-
tions do not allow the exclusion or limitation of incidental or consequential damages or implied warranties, so the above exclusions
may not apply to you. This warranty does not affect your legal (statutory) rights under your applicable national or local laws.
AmpliVox 650 Anthony Trail Suite D, Northbrook, IL 60062 Phone: (800)267- 5486 Fax: (800)267-5489 www.ampli.com
Dispose of the product according to local standards and regulations April, 2013

Termékspecifikációk

Márka: AmpliVox
Kategória: nincs kategorizálva
Modell: SW660

Szüksége van segítségre?

Ha segítségre van szüksége AmpliVox SW660, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva AmpliVox

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025