Használati útmutató American DJ Quad Gem DMX

American DJ Megkönnyebbülés Quad Gem DMX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót American DJ Quad Gem DMX (8 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
American DJ ®
6122 S. Eastern Ave.
Los Angeles CA. 90040
www.americandj.com
Rev. 5/09
User Instructions
American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 2®
Unpacking: Thank you for purchasing the Quad Gem DMX™ by
American DJ . Every Quad Gem DMX™ has been thoroughly tested ®
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your x-
ture for any damage and be sure all equipment necessary to operate
the unit has arrived intact. In the event damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Please do not return this unit to your dealer with-
out contacting customer support rst.
Introduction: The Quad Gem DMX™ is a DMX intelligent LED fixture.
When using DMX mode you can choose between a four channle mode
and a 10 channel mode. The fixture can operate in three different oper-
ating modes; stand alone, sound-active, or in a Master/Slave configu-
ration. The Quad Gem DMX™ comes with several built in programs.
When used as a stand alone unit or when used in multiples linked in a
master/slave configuration. For best results use fog or special effects
smoke to enhance the beams projections.
Customer Support: American DJ provides a toll free customer ®
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking directly
into the light source at all times!
Quad Gem DMX™ General Information
For Your Own Personal Safety, Please Read and Understand This
Manual Completely Before You Attempt To Install Or Operate
This Unit!
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 14 for cleaning details.
• Heat -This fixture should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. Objects have fallen, or liquid has been spilled into the appliance.
B. The appliance has been exposed to rain or water.
C. The appliance does not appear to operate normally or exhibits a
marked change in performance.
Quad Gem DMX™ Safety Precautions
American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 4American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 3 ®®
• DMX-512 Protocol Compatible (Four or Seven DMX Channels)
• RGB + White
• 3 Operating Modes - Master/Slave; Stand Alone; Sound Active
• Internal Microphone
• Digital Display for Address and Function Setting
• UC3 Controller (Not Included)
• 12 Sound Active Shows
• Power Cord Daisy Chain
Quad Gem DMX™ Features
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ .®
American DJ will not accept any liability for any resulting damages ®
caused by the non-observance of this manual or any unauthorized
modication to this unit.
Quad Gem DMX™ Handling Precautions
Quad Gem DMX™ Warranty Registration
The Quad Gem DMX™ carries a 3 year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www.
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact American DJ® cus-
tomer support for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Quad Gem DMX™ General Instructions
American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 6American DJ - www.americandj.com - Quad Gem DMX™ Instruction Manual Page 5 ®®
Power Supply: Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ ®
Quad Gem DMX.™ The American DJ Quad Gem DMX®™ is available
in a 120v and 220v version. Because line voltage may vary from venue
to venue, you should be sure your unit voltage matches the wall outlet
voltage before attempting to operate you xture. Also be sure to only
use the included I.E.C. power cable supplied with the unit, this cable
matches the voltage and current requirements of the unit.
DMX-512: DMX is short for Digital Multiplex. This is a universal pro-
tocol used by most lighting and controller manufactures as a form of
communication between intelligent fixtures and controllers. A DMX
controller sends DMX data instructions from the controller to the fix-
ture. DMX data is sent as serial data that travels from fixture to fixture
via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX
fixtures (most controllers only have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models
of different manufactures to be linked together and operate from a
single controller, as long as all xtures and the controller are DMX
compliant. To ensure proper DMX data transmission, when using
several DMX fixtures try to use the shortest cable path possible. The
order in which fixtures are connected in a DMX line does not influence
the DMX addressing. For example; a fixture assigned a DMX address
of 1 may be placed anywhere in a DMX line, at the beginning, at the
end, or anywhere in the middle. Therefore, the first fixture controlled
by the controller could be the last fixture in the chain. When a fixture
is assigned a DMX address of 1, the DMX controller knows to send
DATA assigned to address 1 to that unit, no matter where it is located
in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX
and Master/Slave Operation): The Quad Gem
DMX™ can be controlled via DMX-512 protocol.
The Quad Gem DMX™ can be a four or seven
channel DMX unit. The DMX address is set elec-
tronically using the controls on the side panel of
the unit. Your unit and your DMX controller require
a standard 3-pin XLR connector for data input and
data output (Figure 1). If you are making your own cables, be sure
Quad Gem DMX™ Set Up
Figure 1
to use standard two conductor shielded cable (This cable may be
purchased at almost all professional sound and lighting stores). Your
cables should be made with a male and female XLR connector on
either end of the cable. Also remember that DMX cable must be daisy
chained and cannot be split.
Quad Gem DMX™ Set Up
Notice: Be sure to follow gures two and three when making your own
cables. Do not use the ground lug on the XLR connector. Do not con-
nect the cable’s shield conductor to the ground lug or allow the shield
conductor to come in contact with the XLR’s outer casing. Grounding
the shield could cause a short circuit and erratic behavior.
DMX512 IN
3-PIN XLR
1
2
3
1
2
3
DMX +
DMX -
COMMON
DMX512 OUT
3-PIN XLR
Figure 2
Figure 3
1 Ground 1 Ground
XLR Male Socket XLR Pin Conguration
3 Hot
2 Cold 2 Cold
3 Hot
XLR Female Socket
Pin 3 = Data True (positive)
Pin 2 = Data Compliment (negative)
Pin 1 = Ground
Special Note: Line Termination.
When longer runs of cable are
used, you may need to use a terminator on the last unit to avoid erratic
behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con-
nected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.
1
2
3
Termination reduces si gnal errors and
avoi ds s igna l transmission problem s
and interference. It is always advisable
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and P IN 3 (DMX +) of the last fixture.
Figure 4

Termékspecifikációk

Márka: American DJ
Kategória: Megkönnyebbülés
Modell: Quad Gem DMX

Szüksége van segítségre?

Ha segítségre van szüksége American DJ Quad Gem DMX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Megkönnyebbülés American DJ

American DJ

American DJ MyDMX5 Útmutató

30 Augusztus 2024
American DJ

American DJ SDC24 Útmutató

29 Augusztus 2024
American DJ

American DJ Quad Gem DMX Útmutató

26 Augusztus 2024
American DJ

American DJ Flash Panel 16 Útmutató

10 Július 2024

Útmutatók Megkönnyebbülés

Legújabb útmutatók Megkönnyebbülés

ION

ION Party Ball USB Útmutató

16 Október 2024
Goobay

Goobay 30780 Útmutató

16 Október 2024
QTX

QTX DM-X12 Útmutató

15 Október 2024
Livarno

Livarno IAN 94799 Útmutató

15 Október 2024
AFX

AFX Grace GRCP07CBBK Útmutató

13 Október 2024
AFX

AFX Point PNTP0107L30D1BK Útmutató

12 Október 2024
Smartwares

Smartwares 20.003.54 Útmutató

9 Október 2024
Neewer

Neewer TL97C Útmutató

8 Október 2024
Neewer

Neewer SRP18C Útmutató

8 Október 2024
Brennenstuhl

Brennenstuhl HARLON 2000 M Útmutató

8 Október 2024