Használati útmutató Altec Lansing Dual Motion iMW140

Altec Lansing hangszóró Dual Motion iMW140

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Altec Lansing Dual Motion iMW140 (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

IMW 140

USB Cable

AUX Cable

Item # IMW140

Quick Start Guide

BLUETOO S AKERTH PE

①　Play/Pause

②　Volume –

③　Volume +

④　Answer

⑤　LED Indicator Lights

AUX IN port

⑥　ON/OFF Switch

Charging Port

1. Make sure the following items are

included in your package.

2. For a look at the various buttons on your speaker,

view the graphic below.

3. In order to charge your speaker’s internal battery, connect Charging:

one end of the included USB cable to the charging port on your speaker.

Connect the other to a USB port or AC charging adapter (not included). An

LED indicator Light turns red when charging, and turns o when fully

charged. Charging may take up to 3 hours.

4. 5. Pairing Your Speaker With a Bluetooth Phone Listening to Music on Your Speaker

-Slide the ON/OFF Switch to the ON position. Your speaker

will enter pairing mode and the LED Indicator Lights will alternately

turn blue and red.

-Go to the Bluetooth Manager of your Bluetooth device. Search

Bluetooth devices and select “Dual Motion” to start connecting.

-If required, enter the PIN code "0000

" and conﬁrm the

entry. Once paired, you will hear your speaker audibly say: “You are

now paired, enjoy.”

Play/Pause

Press the Play/Pause button to get music from your audio source

to play or pause.

Next/Previous Song

Press and hold the Volume + or Volume- buttons for 2s to

advance to the next song or go back to the previous one.

Increase/Decrease Volume

Press and hold the Volume + or Volume - buttons to

increase or decrease the volume.

DUAL MOTION

⑦　

⑧　

6. Using Your Speaker During Phone Calls

Last Number Redialing

Quickly tap on the Answer button twice and the last number that you

dialed will be redialed.

Answering an Incoming Call

To answer an incoming call, quickly press the Answer button.

Ending a Call

To end a call, quickly press the Answer button, and the call will be

disconnected.

Adjusting Volume

By pressing the Volume Up or Volume Down buttons you can increase or

decrease the volume of the phone call.

6 7 8

12345

Altec Lansing One Year Warranty Card

What Is Not Covered by Warranty

To Obtain Warranty Service and Troubleshooting information:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference , and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution: changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful

interference to radio or -television reception, which can be

following measures:

__ Reorient or relocate the receiving antenna.

__ Increase the separation between the equipment and receiver.

__ Consult the dealer or experienced radio/ TV technician for help.

Item # IMW140

Quick Start Guide

7. Wired External Audio Input