Használati útmutató ALC Connect AHSS31

ALC mozgásérzékelő Connect AHSS31

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ALC Connect AHSS31 (3 oldal) a mozgásérzékelő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
QUICK START GUIDE
Motion Detector
Please read these instructions completely
before operating this product.
Model: AHSS31
Compatible with ALC AHS613, AHS616, and
AHS629 Security Systems
u When first turning on the app you will enter the Control Hub (or
System Name you gave) Selection window. Simply tap your
Control Hub to enter.
v
The Status screen will appear. Here you can control the
connected devices as well as access the Scenario, Event and
Setting’s screens.
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
For detailed installation and setup and to view the ALC 1 Year
Limited Warranty, please refer to the complete Connect Series
User’s Guide available on our website:
www.ALCWireless.com/support
For rst time use, batteries are pre-installed (3 AA batteries 3).
Apply the double-sided tape to the rear of the Motion Detector as
shown. Use the thick tape for at wall mount or the thin table for
corner mounting. Select a location between 2-2.5 meters (6-8 ft)
from the oor.
6 to 8 feet
50 feet
110 degree de ion angl s tect e
IMPORTANT: This device needs to be paired with the Control
Hub as follows.
u Since this device is an added accessory, you should have
downloaded the Connect App and installed the ALC Control
Hub as described in the Connect Series owner’s manual.
v At the Status screen, tap .+
w Remove the insulating plastic tab then
open the detector by pressing the tab
at the bottom. Press the Pair button.
x Tap Motion Detector Pair. Tap and
follow the on screen instructions.
At the final screen, enter the Motion
Detector’s name and location and tap
Save.
This Motion Detector is an accessory to be used along with the
Connect series Control Hub Kit. Please refer to this quick start
guide as well as the Connect series owner’s manual, see back
cover for details.
Trouble Pairing?
If it did not detect the
detector, remove the
battery for 5 seconds
and press the Pair button
again. Repeat step 4.

Termékspecifikációk

Márka: ALC
Kategória: mozgásérzékelő
Modell: Connect AHSS31

Szüksége van segítségre?

Ha segítségre van szüksége ALC Connect AHSS31, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mozgásérzékelő ALC

ALC

ALC Connect AHSS31 Útmutató

28 Augusztus 2024

Útmutatók mozgásérzékelő

Legújabb útmutatók mozgásérzékelő