Használati útmutató AKAI MPD26

AKAI keverőpult MPD26

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AKAI MPD26 (52 oldal) a keverőpult kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/52
WWW.AKAIPRO.COM
QUICKSTART GUIDE
ENGLISH ( 1 - 10 )
GUÍA DE INICIO RÁPIDO
ESPAÑOL ( 11 - 20 )
GUIDE D'UTILISATION RAPIDE
FRANÇAIS ( 21 - 30 )
GUIDA RAPIDA
ITALIANO ( 31 - 40 )
KURZANLEITUNG
DEUTSCH ( 41 - 50 )
1
KEY FEATURES
• 16 pressure and velocity-sensitive MPC pads with four banks each
• MPC technologies include Note Repeat, Swing, 16 Level, Full Level, and Tap Tempo
• 12 software parameters on assignable Q-Link knobs and faders
• Dedicated transport controls transmit MMC, MIDI Clock or MIDI CC messages to DAW and
sequencing applications
• MIDI output over USB and traditional MIDI I/O for controlling software and hardware
• Backlit, easy-to-read screen
• USB bus powered, class compliant: plug and play with one USB cable
• Comes with Editor Librarian software
CONNECTION DIAGRAM
1. Connect a USB cable from your computer to the MPD26. The unit will be powered through the USB
connection. Alternatively, if you do not wish to use a computer in your setup or if you wish to power the
MPD26 externally, please plug in an optional Akai MP6-1 (6V-1A DC) power adapter.
2. If you would like to use an external sound module, connect a 5-pin MIDI cable from the MIDI OUT of
the MPD26 to the MIDI IN of the external device.
3. If you would like to use another MIDI controller in your setup, connect a 5-pin MIDI cable from the MIDI
OUT of the external MIDI device to the MIDI IN of the MPD26.
A NOTE ABOUT USING THE MPD2
6
WITH SOFTWARE:
1. Make sure that all external devices
are connected to the MPD26 and
that the MPD26 is connected to your
computer, using the included USB
cable, before opening any software
applications on your computer with
which you might want to use the
MPD26. If the unit is not plugged in
before, your software application
might not recognize the MPD26 as
an available device.
2. In your software application, you will
need to set the MPD26 as a default
MIDI input device. This is usually
done in the MIDI section of the
Preferences menu.
COMPUTER
EXTERNAL SOUND
MODULE
EXTERNAL MIDI
DEVICE
POWER (optional,
not included)
2
TOP PANEL OVERVIEW
11 1
2
8
4 5 6
7 3
14 15
13
10
9
16 1718
12
1. LCD – The display is used for navigating menus, displaying data, and affecting change on MPD26’s
options and parameters.
2. [VALUE] (Push to Enter) – This dial is used to increment and decrement Presets, parameter values
and settings. This dial also functions as an [ENTER] button when it is pressed down.
3. [<] AND [>] – These buttons are used for navigate through fields of menus and options. The [<] button
also functions as a [CANCEL] button.
4. [PRESET] – This button calls up Preset Mode. You can select and recall different Preset programs in
this mode.
5. [EDIT] – This button calls up Edit Mode, which allows you to edit the behavior of pads, knobs, faders
and default settings for each preset.
6. [GLOBAL] – This button calls up Global Mode, where MIDI reset commands and global system
preferences are set.
7. [PROGRAM CHANGE] – Pressing this button will enter Program Change mode. In this mode, you can
send a Program Change or Program with Bank Change message to a hardware or software module.
8. [PREVIEW] – This button allows you to see what value will be sent by a controller, without actually
sending the value. This gives you precise control over your parameters and helps avoid erroneous
controller data being sent to your devices due to the physical position of the controller. Holding down
[PREVIEW] allows you to view the original value and adjust the physical position of a fader, for
example, as necessary before transmitting any values.

Termékspecifikációk

Márka: AKAI
Kategória: keverőpult
Modell: MPD26

Szüksége van segítségre?

Ha segítségre van szüksége AKAI MPD26, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók keverőpult AKAI

AKAI

AKAI APC MINI Útmutató

1 Augusztus 2024
AKAI

AKAI MPD26 Útmutató

26 Július 2024
AKAI

AKAI APC mini mk2 Útmutató

26 Július 2024

Útmutatók keverőpult

Legújabb útmutatók keverőpult

Yamaha

Yamaha MG12 Útmutató

16 Január 2025
American Audio

American Audio Q-D6 Útmutató

16 Január 2025
ADB

ADB ME1163 Útmutató

15 Január 2025
Proline

Proline HB200P Útmutató

15 Január 2025
Samson

Samson L1200 Útmutató

14 Január 2025
Samson

Samson MDR624 Útmutató

14 Január 2025
Konig

Konig KN-DIGICON20 Útmutató

12 Január 2025
Vonyx

Vonyx STM500BT Útmutató

12 Január 2025
Rane

Rane Sixty-Four Útmutató

12 Január 2025
Wharfedale

Wharfedale SL 1224 USB Útmutató

12 Január 2025