Használati útmutató Aiptek V50

Aiptek Beamer V50

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Aiptek V50 (22 oldal) a Beamer kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/22
User’s Manual
www.aiptek.eu Page 1
EN
Welcome:
Thank you for purchasing this PocketCinema V50 from Aiptek. PocketCinema V50 is the latest
generation of Pico Projectors with DLP technology inside. DLP offers a brighter picture which
much higher contrast and a compact size. V50 combines this features with a media player and
battery so that PocketCinema V50 is the best solution for mobile use.
Before you start using the product, we recommend reading this manual step by step to obtain
the best results with your new Pico Projector. We wish you a lot of fun.
Best regards
Your Aiptek Team
Safety Notice:
1. Keep the device and packaging materials out of the reach of infants and children.
2. Avoid subjecting the power adapter and other contacts to dripping or splashing water and
dry your hands before you use it. Do not place objects filled with liquids such as vases, etc.
on or near the device.
3. Make sure that the used power outlet is always readily available and never hidden. In case
of emergency, use the power adapter to separate the device from the power network.
4. Keep your device away from all flames such as candles and do not set them up in the
vicinity of the device.
5. Keep the unit at least 10 cm away from other objects. Make sure the ventilation is not
covered by newspapers, tablecloths, curtains, etc.
6. For your own safety, do not use the projector during thunderstorms or lightning.
7. To ensure safety and the display effect, always use the power adapter supplied by the
manufacturer.
8. The battery is integrated with the device. Do not dissemble and modify. The battery should
be replaced by qualified service staff only.
9. To ensure normal operation of this product and avoid any damage, do not use or store this
product under the following conditions: environment with too low/high temperature; places
with high humidity or long-term direct sunshine; bad conditions involving strong impacts.
10. During the operation, this product may heat lightly, which is normal.
11. Wait before connecting the mains adapter if the device has been moved from a cold
location into a warm one. Any condensation that has formed may in certain circumstances
destroy the device. As soon as the device has reached room temperature it can be used
without risk.
12. Handle the product with care. Avoid contact with sharp objects. Keep device away from
metallic objects.
13. Place the projector on a flat surface. Any collision or falling to the ground is likely to
damage the product.
14. Do not drop or disassemble the product otherwise the warranty voids. Opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
15. This product supports hot plugging of memory cards. However, it is suggested to power off
the product before plugging/unplugging your memory card to protect the memory card.
16. Use only the accessories supplied by the manufacturer.
17. Both product and user’s manual are subject to further improvement or supplement without
further notice.
18. Avoid facing directly into the projector’s lens.
User’s Manual
www.aiptek.eu Page 2
EN
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subjected to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in residential installations. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Move the equipment away from the receiver.
- Plug the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/television technician for additional suggestions.
You are cautioned that any change or modifications to the equipment not expressly approved
by the party responsible for compliance could void your authority to operate such equipment.
If this product is going to be end of life, please recycle it
properly. It cannot be treated as municipal waste. It must
be disposed of separately via the appropriate return and
collection systems available.
Disposal of waste batteries (applicable in the European Union and other
European countries with separate collection systems)
This symbol on the battery or on its packaging indicates that the battery provided
with this product shall not be treated as household waste.
On certain batteries, this symbol might be used in combination with a chemical
symbol. The chemical symbols of mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004% lead.
To ensure the battery will be treated properly, hand over the product at end-of-life to the
applicable collection point for the recycling of electrical and electronic equipment and hand the
battery over to the applicable collection point for recycling of waste batteries.
User’s Manual
www.aiptek.eu Page 3
EN
Care and Safety Information for Projectors:
Please follow all warnings, precautions and maintenance as recommended in this user’s
guide.
Usage Notice:
Do:
● Turn off and unplug the power before cleaning the product.
● Use a soft dry cloth with mild detergent to clean the display housing.
● Unplug the power if the product is not used for a long period of time.
● Ensure that the ambient room temperature is within 0 - 35°C.
● Relative Humidity is 20-80%, 80% (Max.), non-condensing.
● It’s normal that the projector will feel warm with continuous use due to its high
performance.
Avoid Hearing Damage:
Listening at high volume for a
long period of time could cause
damage to your ears.
Eye Safety Warnings!
A
void staring/facing directly into
the projector beam at all time.
Do not:
Block the ventilation opening.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
► In extremely hot, cold or humid environments.
► In areas susceptible to excessive dust and dirt.
► Near any appliance generating a strong magnetic field.
► In direct sunlight.

Termékspecifikációk

Márka: Aiptek
Kategória: Beamer
Modell: V50

Szüksége van segítségre?

Ha segítségre van szüksége Aiptek V50, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Beamer Aiptek

Aiptek

Aiptek V50 Útmutató

28 Augusztus 2024

Útmutatók Beamer

Legújabb útmutatók Beamer

Acer

Acer P1165P Útmutató

16 Október 2024
InFocus

InFocus IN228 Útmutató

15 Október 2024
Acer

Acer X137WH Útmutató

14 Október 2024
Hitachi

Hitachi CP-A352WNM Útmutató

14 Október 2024
Barco

Barco Thor Útmutató

14 Október 2024
NEC

NEC NP-M283X Útmutató

14 Október 2024
Epson

Epson PowerLite 5520W Útmutató

14 Október 2024
Acer

Acer X112 Útmutató

13 Október 2024
Epson

Epson PowerLite Pro G6770WUNL Útmutató

13 Október 2024
Sanyo

Sanyo PLC-8810N Útmutató

12 Október 2024