Használati útmutató Ade Gravis-210504

Ade vágógép Gravis-210504

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ade Gravis-210504 (16 oldal) a vágógép kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
OPERATING INSTRUCTIONS
Gravity Slicer
Model GRAVIS 250
Gravis- -Rev004- - 210504 UM en
1 Gravis- -Rev004- -210504 UM en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
1.1 Introduction ............................................................................................................................ 2
1.2 Use ........................................................................................................................................ 2
1.3 Residual risks ........................................................................................................................ 3
2. START- 3UP.............................................................................................................................
2.1 Installation ............................................................................................................................. 3
2.2 Wiring .................................................................................................................................... 3
2.3 Mechanical safety devices ..................................................................................................... 4
2.4 Electrical safety devices 4 .........................................................................................................
2.5 Acceptance testing ................................................................................................................ 4
2.6 Safety precautions ................................................................................................................. 4
2.7 Operation ............................................................................................................................... 5
3. USING THE MACHINE .......................................................................................................... 5
3.1 Machine Overview ................................................................................................................. 5
3.2 Operating functions ................................................................................................................ 6
3.3 Switching on .......................................................................................................................... 6
3.4 Feeding the product ............................................................................................................... 6
3.5 Adjusting the slice thickness .................................................................................................. 6
4. CLEANING AND CARE ......................................................................................................... 6
4.1 Cleaning ................................................................................................................................ 6
4.2 SHARPENING OPERATIONS............................................................................................... 7
4.3 Lubricating ............................................................................................................................. 8
4.4 Disposal ................................................................................................................................. 8
5. TRAINING ............................................................................................................................. 9
6. WARRANTY .......................................................................................................................... 9
7. TECHNICAL DATA ................................................................................................................ 9
8. CE MARKING AND DECLARATION OF CONFORMITY ..................................................... 10
9. CIRCUIT DIAGRAM ............................................................................................................ 11
10. EXPLODED VIEW ............................................................................................................... 11
11. SPARE PARTS LISTS ......................................................................................................... 13
Gravis- -Rev004- - 2 210504 UM en
1. FOREWORD
This symbol means: “Observe operating instructions.” Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This manual has been written to comply with the Machinery Directive as amended.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is tted to assure maximum eciency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the instructions and explanations
contained in the manual.
Before starting up the slicer, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insucient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
1.1 Introduction
The slicers have been designed to comply with applicable safety standards. Consequently, all our
slicers are fitted with a plate featuring the “CE” mark attesting to the product's conformity with said
provisions.
The housing, product carriage, feed plate, and sickle guard are made of anodized aluminum. The
housing design enables easy cleaning. The blade is set in motion by an electric motor with a V-belt
drive, which has a noise level of <70 dB measured at a distance of 1 meter at a height of 1.60 meters.
The total vibration of the parts coming into contact with the user's hands and arms is <2.5 m/s².
1.2 Use
These gravity slicers are intended for slicing cooked and raw sausages, hot or cold meat, bread, and
various types of cheese. The machine is not suitable for slicing some types of hard cheese. The slice
thickness is adjustable from 0 to 13 mm. When slicing cheese, we recommend using a blade with
Teon coating at cheese temperatures between 7 and 10 °C.
Never use the slicer to slice frozen products, meats, or sausage products with
bones, fruits, vegetables, or non-food products.
Any attempt to slice such products or similar foods may cause severe damage to
the machine and render the warranty null and void.
The machine is suitable for about 60 catering sta members. The above gure is merely a
recommendation based on experience and may vary depending on the application. The maximum
duty cycle is 40% (24 minutes per hour). The electric motor must then be allowed sucient time to
cool down. Operating the machine continuously for shorter periods also shortens the cooling
intervals. The machine is equipped with thermal overload protection. When the machine's electric
motor gets overheated, it switches o automatically. If this occurs, switch the machine o
immediately. Allow sucient time for the motor to cool down before switching the machine back on.
Thermal overload protection merely serves as another safety measure and should never be thought
of as a time limit for the duty cycle in the daily operation.
The machine may only be used in its original condition and with original parts. It is strictly forbidden
to dismantle the safety devices. If you notice any signs of damage to the safety devices or if any
safety devices are not in place, shut down the machine immediately and contact ADE for repair or
replacement.

Termékspecifikációk

Márka: Ade
Kategória: vágógép
Modell: Gravis-210504

Szüksége van segítségre?

Ha segítségre van szüksége Ade Gravis-210504, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vágógép Ade

Ade

Ade Gravis-210504 Útmutató

2 Szeptember 2024
Ade

Ade Panis-230228 Útmutató

2 Szeptember 2024
Ade

Ade Victoria-V-210617 Útmutató

2 Szeptember 2024
Ade

Ade AUTOMATIC-XL Útmutató

26 Augusztus 2024
Ade

Ade AUTOMATIC-L Útmutató

26 Augusztus 2024
Ade

Ade MARE350 Útmutató

26 Augusztus 2024
Ade

Ade Diagonal SN1 Útmutató

13 Augusztus 2024
Ade

Ade Prosciutto 300 Útmutató

11 Augusztus 2024
Ade

Ade Gloria 250-230 Útmutató

30 Július 2024
Ade

Ade Hanse 250 Útmutató

25 Július 2024

Útmutatók vágógép

Legújabb útmutatók vágógép

Logan

Logan 350-1 Útmutató

27 Március 2025
Logan

Logan Artist Elite 450-1 Útmutató

27 Március 2025
Genius

Genius Nicer Dicer Quick Útmutató

12 Január 2025
Eldom

Eldom Sliss KR350 Útmutató

11 Január 2025
RGV

RGV Desy AF 220 AM Útmutató

11 Január 2025
RGV

RGV Desy AF 275 F Útmutató

11 Január 2025
Ovela

Ovela OVSAFSLCERA Útmutató

6 Január 2025
Royal Catering

Royal Catering RCAM-250 Útmutató

4 Január 2025
Royal Catering

Royal Catering RCES-215/12 Útmutató

1 Január 2025
CaterChef

CaterChef 537150 Útmutató

1 Január 2025