Használati útmutató 4ms Buff Mult

4ms nincs kategorizálva Buff Mult

Olvassa el alább 📖 a magyar nyelvű használati útmutatót 4ms Buff Mult (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
BUFFMULT
4ms Company
Eurorack Module User Manual v1.0 (2013-12-06)
The BUFF MULT from 4ms is a wide-bandwidth, two channel 1-to-3 buffered
multiple with red/white LEDs indicating positive/negative voltage.
The BUFF MULT can also be connected as a 1-to-6 multiple.
Features
•Two input jacks (white). Bottom input is normalized to top input jack
•Six output jacks (black), fully buffered
•Two LEDs (red/white) indicate signal
◦Red = positive
◦White = negative
•Wide-bandwidth
◦Full audio range, no roll-off in the upper frequencies
◦DC-coupled allows CV and other low-frequencies to pass unaltered
◦Suited for LZX Visionary and other systems requiring high frequencies
◦100MHz bandwidth
◦510 ohm output impedance (very low)
◦>10 mega-ohm input impedance (very high)
Specifications
•3HP
•18mm deep (0.75”)
•10-pin power cable included
Power usage
•13mA on +12V
•13mA on -12V
•+5V not used
DOWNLOAD MOST RECENT MANUAL AT:
http://4mspedals.com/buffmult.php
Uses
Every system needs at least one BUFF MULT. They can can help in a variety of ways:
•Checking a signal. Just plug into a white jack and watch the LED.
•Routing a signal to multiple places. Normally there is a small voltage drop when splitting a signal
(“stacking” or passively mult'ing). This is especially noticeable with a 1V/oct signal (a sequencer line, a
keyboard CV signal, or any “pitch” signal), because a small voltage drop will sound drastically out of
tune. The BUFF MULT prevents any voltage drop.
•Live patching. If you perform live often, you probably have the habit of turning something down before
patching or unpatching. Often in modular systems a signal gets split into 3, 4, 5 or more signals, making
it a hassle to mute everything if you just want to plug/unplug one thing. Using a BUFF MULT prevents
this: if you plug/unplug a cable, no thump/glitch/zap/buzz will appear on the other lines.
•Sharing a clock. For rhythmic patches, it's often critical to have a master clock. Whether you're sharing
a clock with several modules within your system or sharing it with other systems, it's important that the
master clock keeps running. Best practice is to run the master clock directly into the BUFF MULT. Run
the six BUFF MULT outputs to your destinations. Even if you accidentally short out a cable to the
faceplate or jack nut, the master clock will not glitch. Plus, you can watch the blinking LED!
•Protecting your equipment. Putting a buffer in between modules will protect the inputs and outputs
from damaging each other. If you are concerned about a module being damaged (e.g. a DIY module,
external gear, or gear that is suspected of being faulty), use a BUFF MULT!
•Connecting to external gear (or another modular system). Put the BUFF MULT towards the edge of
your case. When you need to run a signal in or out of your case, use a short cable to go to the BUFF
MULT, and then use a long cable to go to the external gear. This keeps things clean in two ways: less
noise on the line, and less cable clutter. It also protects your expensive modules if something were to
yank the cable (kittens, children, improv musicians).
•Conditioning a signal. A common problem is that a trigger signal from external gear will not trigger a
eurorack module. Even if the outboard gear's voltage is rated high enough (e.g. 5V), the “drive”, or
output impedance, may be too weak to cause certain modules to detect a trigger. The BUFF MULT
fixes this. It has a very high input impedance, meaning can drive it. It also has a very low anything
output impedance, meaning it will drive anything. Note: if you need to boost the voltage of a signal, use
a 4ms SISM.
Patching
•Dual 1-to-3 buffered multiple
◦Plug the first signal into top white jack and take the buffered outputs from the top three black jacks
◦Plug the second signal into bottom white jack and take the outputs from the black jacks below.
◦The top LED will display the top channel's signal, and the bottom LED will display the bottom
channel's signal (see LED colors).
•Single 1-to-6 buffered multiple
◦Plug into the top white jack, and take the outputs from all six black jacks.
◦Do not plug into the bottom white jack.
◦Both LEDs will display the signal.
•Signal checker
◦Run a signal into either white jack, and run the black jack below it to the destination module
◦Watch the LED to check your signal.
LED colors
The LEDs are useful for seeing what's happening with your signal.
•Red indicates a positive voltage is present.
•White indicates a negative voltage is present.
•Red and White at the same time indicates a bi-polar AC signal (positive and negative)
•Flashing Red indicates a clock, trigger, gate, or LFO (positive-only).
•The brightness of the LED indicates how strong the signal is (amplitude)
Page 2

Termékspecifikációk

Márka: 4ms
Kategória: nincs kategorizálva
Modell: Buff Mult

Szüksége van segítségre?

Ha segítségre van szüksége 4ms Buff Mult, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva 4ms

4ms

4ms Listen Up Útmutató

2 Október 2024
4ms

4ms Buff Mult Útmutató

22 Szeptember 2024
4ms

4ms Looping Delay Útmutató

21 Augusztus 2024
4ms

4ms Sampler Útmutató

21 Augusztus 2024
4ms

4ms Shaped Dual EnvVCA Útmutató

15 Augusztus 2024
4ms

4ms VCA Matrix Útmutató

12 Augusztus 2024
4ms

4ms Pod 64X Útmutató

5 Augusztus 2024
4ms

4ms Quad Clock Distributor Útmutató

4 Augusztus 2024
4ms

4ms Listen Four Quarters Útmutató

12 Július 2024
4ms

4ms Stereo Triggered Sampler Útmutató

9 Július 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland

Roland SD-20 Útmutató

16 Október 2024
SilverCrest

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024
IFM

IFM TY0058 Útmutató

16 Október 2024
Thule

Thule Kit 186039 Útmutató

16 Október 2024
Blumfeldt

Blumfeldt Solidflor Útmutató

16 Október 2024
Dimplex

Dimplex QRAD200E Útmutató

16 Október 2024
DAS Audio

DAS Audio AX-112-5 Útmutató

16 Október 2024
Ferplast

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024
AEG

AEG MECK52 Útmutató

16 Október 2024
Black Diamond

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024