Használati útmutató Zodiac MX8

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Zodiac MX8 (12 oldal) a Niet gecategoriseerd kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
H0384700 - REV- C
Owner’s Manual
English
2
For customer service or support:
Zodiac Group Australia
219 Woodpark Road
Smithfield, NSW 2164
1800 688 552
Important Information
Notice for Vinyl Liner Pools: Before installing your pool cleaner, examine the interior of your pool
carefully. If the vinyl liner is brittle or has stones, wrinkles, roots or metal corrosion in contact with the
underside of the liner, or has damage to the base material or supporting walls, do not install the cleaner
before having a qualified professional perform the necessary repairs or liner replacement. Zodiac Group
Australia Pty Ltd (Zodiac) will not be responsible for liner damage caused by a cleaner which
is in disrepair, pattern removal from a vinyl liner, or a cleaner used in a pool having an aged or
deteriorated liner. Please see Limited Warranty.
• Clean the skimmer basket, pump basket and pool filter before installing the cleaner and on a
regular basis thereafter.
• Always disconnect the cleaner from the pool wall or skimmer before cleaning or backwashing the
pool filter. After cleaning or backwashing, let the filtration system run for at least five (5) minutes
before re-connecting the cleaner.
• Remove the cleaner from the pool before chemical or shock treatments. Wait a minimum
of four (4) hours after super chlorination before re-installing the cleaner.
Read owner’s manual completely before operating the cleaner.
Remove cleaner before entering the pool.
Do not operate outside of the pool.
Do not let children play with cleaner.
Congratulations on the purchase of your new Zodiac MX6/MX8 automatic pool cleaner. Your Zodiac
MX6/MX8 is designed and manufactured for easy installation, and years of carefree operation. Before
installing the cleaner, please take a few moments to become familiar with its components and to review
the items listed under .Important Information
Like most mechanical devices, the Zodiac MX6/MX8 requires periodic adjustments, routine
maintenance, and the replacement of certain hardworking parts. Be sure to have the Zodiac MX6/MX8
checked occasionally by your local Zodiac dealer or service center.
Always insist on genuine Zodiac® replacement parts. Non-Zodiac parts are not made to our specifications.
They may have an adverse effect on the operation of your Zodiac MX6/MX8 or may even damage it.
Zodiac MX6/MX8 Complete Cleaner
1. MX6/MX8 Cleaner Body (1)
2. AD Flow Valve & Connector (1)
3. Universal Weir Cuff (1)
4. Flow Regulator Valve (1)
3
English
5. Twist-Lock Hose Section MX8 (11) MX6 (9)
6. Leader Hose with Float (1)
7. 90 Degree Elbow (1)
8. Yellow Wheel Chip
Introduction
1
5
32
6
7
4
8

Termékspecifikációk

Márka: Zodiac
Kategória: Niet gecategoriseerd
Modell: MX8

Szüksége van segítségre?

Ha segítségre van szüksége Zodiac MX8, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Niet gecategoriseerd Zodiac

Zodiac

Zodiac CX50 Útmutató

28 Augusztus 2024
Zodiac

Zodiac CX40 Útmutató

28 Augusztus 2024
Zodiac

Zodiac MX8 Útmutató

10 Augusztus 2024
Zodiac

Zodiac T3 Suction Útmutató

8 Augusztus 2024
Zodiac

Zodiac pH Perfect Útmutató

8 Augusztus 2024
Zodiac

Zodiac EL-24 Útmutató

7 Augusztus 2024
Zodiac

Zodiac TP700 Útmutató

7 Augusztus 2024
Zodiac

Zodiac MX6 Útmutató

6 Augusztus 2024

Útmutatók Niet gecategoriseerd

Legújabb útmutatók Niet gecategoriseerd