Használati útmutató ZLine KB2IEBBXB30

ZLine Páraelszívó KB2IEBBXB30

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ZLine KB2IEBBXB30 (4 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Designer Island Hood Installation
1
1Locate the center above the stove where the hood is to be installed. There are 2 brackets,
the Crown Molding Bracket and the Chimney Mounting Bracket. Install the Crown
Molding Bracket directly on the ceiling with the curved sides facing towards the
ground (the crown will slide on at the end). Install the Chimney Mounting Bracket
underneath the Crown Mounting Bracket. Ensure that the bracket will be secured to s
solid wood backing . Attach so it can hold the load bracket to the ceiling. s
*The recommended height to install your hood is 30˝ minimum and 36 "maximum
above the cooktop.
*For Outdoor (Copper and 304 Series) hood installation, the unit must be installed
at a minimum of 36˝ above the grill.
Designer Island Hood Installation
2How to measure your chimney: Make note above stove top where the base of the hood
will be after installed (30-36in above stove). From this point, measure to the point
where the Chimney Mountain Bracket rests (this bracket ends 2.5in from the ceiling,
the chimney will terminate here, not flush with the ceiling). If you measure to the
ceiling, subtract 2.5 inches for correct chimney height. Once you have the total height,
subtract the height of the base of the hood to where the chimney begins and you will
have the correct height of the chimney. Cut the chimney to fit.
*Make sure to include 2.5 inches of space above the chimney to the ceiling (the crown
molding will cover this).
2
3 Attach the transition piece, rubber gasket and ducting
to top of the hood.
5 Install the duct work in the center of
the ceiling bracket.
4Attach the angle iron pieces to the hood.
Measure your cut chimney, add 2.5in and
attach the second angle iron to correct height
for mounting.
3

Termékspecifikációk

Márka: ZLine
Kategória: Páraelszívó
Modell: KB2IEBBXB30

Szüksége van segítségre?

Ha segítségre van szüksége ZLine KB2IEBBXB30, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Páraelszívó ZLine

ZLine

ZLine 8632H30 Útmutató

27 Augusztus 2024
ZLine

ZLine 45530 Útmutató

27 Augusztus 2024
ZLine

ZLine 321GG30 Útmutató

27 Augusztus 2024
ZLine

ZLine 655HBXXX30 Útmutató

27 Augusztus 2024
ZLine

ZLine GL2I36 Útmutató

27 Augusztus 2024
ZLine

ZLine 52730 Útmutató

27 Augusztus 2024
ZLine

ZLine KBCRN36 Útmutató

27 Augusztus 2024
ZLine

ZLine 8654SN30 Útmutató

27 Augusztus 2024
ZLine

ZLine Steel KF1 Útmutató

27 Augusztus 2024
ZLine

ZLine 681IW48 Útmutató

27 Augusztus 2024

Útmutatók Páraelszívó

Legújabb útmutatók Páraelszívó

Atag

Atag WM 5 Útmutató

30 Március 2025
Smeg

Smeg CA60EPX Útmutató

30 Március 2025
CATA

CATA C GLAS H BK Útmutató

30 Március 2025
Smeg

Smeg STH650X Útmutató

30 Március 2025
Elica

Elica PIX BL/F/42 Útmutató

30 Március 2025
Etna

Etna 4191 inox Útmutató

29 Március 2025
Miele

Miele da 249 1 Útmutató

29 Március 2025
Miele

Miele DA 420 UL Útmutató

29 Március 2025