Használati útmutató Zebra MZ 220

Zebra Printer MZ 220

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Zebra MZ 220 (23 oldal) a Printer kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/23
MZSeries
Quick Start Guide
1
Introduction
Thank you for choosing one of our Zebra
MZ™Series Mobile Printers. These rugged
printers will become productive and efficient additions to
your workplace thanks to their innovative design. Because
they are made by Zebra Technologies you can be assured
of world-class support for all of your bar code printers, soft-
ware, and supplies.
This document provides an easy reference for operating and
maintaining the MZ Series of Mobile Printers.
Complete and current documentation for each model printer
is provided by the available on the MZ Series User Guide
Internet at: www.zebra.com/manuals.
Always refer to the Important Safety Information data
sheet shipped with each printer and the Technical
Bulletin shipped with each battery pack. These
documents detail procedures to ensure maximum
reliability and safety while using this printer.
© ZIH Corp 2008
QSG-MZS-007 Rev. A
MZ Series Overview
(MZ 220 Illustrated)
MZ 220 MZ 320
Media width:
2.0 in. (50.8 mm)
Media width:
3.0 in. (76.2 mm
L: 5.34 in. [135.6 mm]
W: 3.18 in. [80.7 mm]
H:2.47 in. [62.7 mm]*
*w/ belt clip
L: 5.34 in. [135.6 mm]
W: 4.11 in.[104.4 mm]
H: 2.47 in. [62.7 mm]*
*w/ belt clip
Introduction
Getting Started
Using the
Printer
Troubleshooting
Accessories
Contact Us
1. Feed Switch
2. Media Status Light
3. USB Port
4. Battery Charging Receptacle
5. Media/Black Bar Sensor
6. Media Cover
7. Platen
8. Printhead
9. Latch Release Button
10. Communications Status Indicator
11. IR window
12. Charge Status Indicator
13. Power Switch
14. Power Indicator
15. Belt Clip
16. Battery Door Latch
17. Battery Compartment Cover
18. Battery Pack
19. External Charge Contacts
15
16
7
1
2
4
6
38
18
17
9
10
11
12
13
14
19
5
2
MZ Series
Quick Start Guide
Installing the Battery
Batteries are shipped uncharged. Remove any
protective packaging from a new battery pack, install it
in the printer and charge completely prior to initial use.
Section Continues
Removing the Battery
1. Use a coin to
rotate the Battery
Compartment lock 1/4
turn as shown.
2. Remove the Battery
Compartment Cover
Always release the locking barb before unplugging the
battery connector. Do not attempt to remove the connector
by force, or by using pliers, etc. as this could cause damage
to the printer’s CPU assembly.
Introduction
Getting Started
Using the
Printer
Troubleshooting
Accessories
Contact Us
1. Use a coin to
rotate the Battery
Compartment lock 1/4
turn as shown.
2. Remove the Battery
Compartment Cover
3. Plug the Battery
Pack connector into
the Printer.
Battery Pack
Note location of label
4. Re-install the Battery Com-
partment Cover and rotate
the lock back 1/4 turn to lock it
in place .
Ensure battery leads are not pinched prior to replacing
battery cover.
Battery Pack Connector
Squeeze lock to release.
Allow old battery pack to
drop out of the printer

Termékspecifikációk

Márka: Zebra
Kategória: Printer
Modell: MZ 220

Szüksége van segítségre?

Ha segítségre van szüksége Zebra MZ 220, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Printer Zebra

Zebra

Zebra ZD411D Útmutató

8 Október 2024
Zebra

Zebra 110PAX3 Útmutató

3 Szeptember 2024
Zebra

Zebra ZT220 Útmutató

22 Augusztus 2024
Zebra

Zebra ZT400 Serie Útmutató

22 Augusztus 2024
Zebra

Zebra RW 220 Útmutató

31 Július 2024
Zebra

Zebra ZT510 Útmutató

24 Július 2024
Zebra

Zebra ZT231 Útmutató

16 Július 2024
Zebra

Zebra MZ 320 Útmutató

10 Július 2024
Zebra

Zebra MZ 220 Útmutató

7 Július 2024

Útmutatók Printer

Legújabb útmutatók Printer