Használati útmutató Xonix CAL

Xonix óra CAL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Xonix CAL (1 oldal) a óra kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
INSTRUCTION MANUAL
Thank you for purchasing our products. To ensure prolonged use and optimum performance please read this instruction
manual carefully familiarize yourself with the terms of warranty. We suggest that you keep this instruction manual at
hand and refer to it whenever required.
and
1. Pull out the crown for a click, set the hands by
turning the crown in either direction to the
desired hour and minute time.
2. Push the crown to the normal position to start.
HOW TO SET TIME:
EL light :
1. HOW TO USE EL BUTTON:
1. Press the button, the backlight of the watch will be on.
2. The backlight of the watch use an electro luminescent (EL) light.
3. Frequent use of the backlight shortens the EL battery life.
At the first sign of low power (no light or dim display) have the battery replace by our authorized distributor.
1. Opening the case back, you will see 1pcs CR2016 battery . Remove the contact spring pressed on the battery and
take out the dead batteries.
2. Place the new battery and screw spring tightly. EL brightness should be the original situation.
3. Close case back.
HOW TO REPLACE BATTERY FOR EL :
TO PRESERVE THE QUALITY OF YOUR WATCH:
1. As this watch contains precise electronic components, it is suggested that the back cover be removed only by
authorized person.
2. Do not operate pushers when the watch is wet or in water.
3. If the watch is used in water, or it is wet, wipe it thoroughly dry.
4. Should water or coidensation appear in the watch, immediately open the case back and leave it air dry because
water can corrode electronic parts inside the case.
5. Although the watch is designed to withstand shocks under normal use, it is inadequate to subject it to rough impact.
6. Clean the watch with a soft cloth or water. Never use chemical solution.
7. Avoid exposure the watch to chemicals such as gasoline, aero spray, paints etc, those chemical action will damage
watch.
8. Avoid wearing the watch in electro magnetic condition, or put watch under strong light for too long.
HOW TO REPLACE MOVEMENT BATTERY:
1. take out battery CR2016.
2. Remove the insulator on the movement, you will see movement battery SR626SW. Take out the dead battery.
3. Place new battery and install CR2016, close case back.
4. Adjust the hand at the correct time.
NOTE: Avoid short circuit or exposing the battery in fire.
For Analog Watch With EL Light

Termékspecifikációk

Márka: Xonix
Kategória: óra
Modell: CAL

Szüksége van segítségre?

Ha segítségre van szüksége Xonix CAL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók óra Xonix

Xonix

Xonix AAH Útmutató

22 Augusztus 2024
Xonix

Xonix CJ Útmutató

21 Augusztus 2024
Xonix

Xonix AR Útmutató

21 Augusztus 2024
Xonix

Xonix BG Útmutató

21 Augusztus 2024
Xonix

Xonix CAF Útmutató

20 Augusztus 2024
Xonix

Xonix CAK-001 Útmutató

20 Augusztus 2024
Xonix

Xonix Alex 320b Útmutató

20 Augusztus 2024
Xonix

Xonix AAL Útmutató

20 Augusztus 2024
Xonix

Xonix AA Útmutató

20 Augusztus 2024
Xonix

Xonix AAT Útmutató

19 Augusztus 2024

Útmutatók óra

Legújabb útmutatók óra