Használati útmutató Wilson Electronics AG Pro 70
Wilson Electronics
TV jelerősítő
AG Pro 70
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wilson Electronics AG Pro 70 (16 oldal) a TV jelerősítő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/16
Contents:
Antenna Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Install Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Outside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Finding the Strongest Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the Inside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing a Wilson Electronics Signal Booster . . . . . . . . . . . . . . . . 9
Powering up a Wilson Electronics Signal Booster . . . . . . . . . . . . 9
Understanding the Signal Booster Lights . . . . . . . . . . . . . . . . 10
Warnings and Recommendations . . . . . . . . . . . . . . . . . . . . 13
Guarantee & Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: This manual contains important safety and operating
information. Please read and follow the instructions in this
manual. Failure to do so could be hazardous and result in
damage to your Signal Booster.
Adjustable Gain
Signal Boosters
AG Pro 75™, AG Pro 70™, AG Pro Installer™,
AG SOHO 65™, AG SOHO 60™
(SOHO: Small Office, Home Office)
In-Building Wireless 800/1900 MHz
Smart Technology ™
Appearance of device and accessories may vary.
1Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
Installation Instructions for the Following
Wilson Electronics Signal Boosters:
AG Pro 75™, AG Pro 70™, AG Pro Installer™& AG SOHO 65™
,
AG SOHO 60™ In-Building Wireless 800/1900 MHz
Smart Technology ™ Signal Boosters
Model # 271265
FCC ID: PWO271265 IC: 4726A-271265
The term “IC” before the radio certification number only signifies that Industry Canada
technical specifications were met.
How it Works
Wilson Electronics Signal Boosters are bi-directional devices that deliver
service levels consistent with what would be expected in areas of high cell
network coverage. They amplify a weak or shadowed signal in mobile,
marine and in-building applications. When using a Wilson Electronics
Signal Booster in conjunction with Wilson Electronics antennas, the
Outside Antenna will collect the cell tower signal and send it through
the cable to the Signal Booster. The signal is then amplified and re-
transmitted through the Inside Antenna into the room. Cell phones and
cellular data cards in that area then communicate with the improved
signal. When a cell phone or cellular device transmits, the signal is
received by the Inside Antenna, amplified by the Signal Booster and
transmitted back to the cell tower through the Outside Antenna.
Inside this Package
Signal
Booster
AC/DC
Power
Supply
To purchase, call Wilson Electronics Sales Department at: 800-204-4104
Outdoor Antenna Options
Indoor Antenna Options & Accessories
1. 1900 MHz Yagi PCS Antenna (301124)
2. 800 MHz Yagi Cellular Antenna (301129)
3. Wide Band Directional Antenna 700 MHz -
2700 MHz (304411)
A. Wide-Band Panel Antenna 700-2700MHz (301155)
B. 50 Ohm Lightning Surge Protector N-Connector (859902)
C. 75 Ohm Lightning Surge Protector F-Connector (859988)
Splitter options on page 8
3
12BC
A
(The AG Pro Installer
has a different knob
conguration)
Note: Kits may contain different accessories
N Female - FME
Female Adapter
(Sold with the
AG SOHO 60)
Appearance of device and accessories may vary.
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
Select a location to install the Signal Booster that is away from excessive 1.
heat, direct sunlight, moisture and has proper ventilation. Do not place the
Signal Booster in an air-tight enclosure.
Select a location on the roof of the building to install the Outside Antenna. 2.
Use a cell phone in test mode to find the strongest signal from the cell
tower (see page 6). Visit
www.WilsonElectronics.com
to find test mode
function for your particular cell phone.
Run the Outside Antenna cable to the Signal Booster and attach it to 3.
the connector labeled “Outside Antenna” on the Signal Booster. Run the
Inside Antenna cable to the Signal Booster and attach it to the connector
labeled “Inside Antenna” on the Signal Booster.
For more information on
running cable
(see page 7). Lightning Surge Protection is recommended
for all in-building installations (see page 6).
Select a location for the Inside Antenna, preferably in the center of 4.
where the signal needs to be amplified. A minimum separation distance
of 20 vertical (within the null zone) or 50 horizontal feet is necessary
for proper operation. If the inside coverage is not sufficient you may
need to increase the separation distance even further (see installation
diagram on pages 3 & 4).
Before powering up the Signal Booster, verify that both the Outside 5.
Antenna and the Inside Antenna are connected and check that all
connections are tight. Note: Be careful when plugging the connectors
in so as not to bend the center pins on the connectors (
see page 9).
The Signal Booster has been packaged with the gain control knobs 6.
adjusted to the highest gain position. If one or both of the lights are not
green, please refer to pages 10-12. For AG Pro Installer (see page 12).
Quick Install Overview
See Installation Diagram on page 3. Contact Wilson Electronics Technical
Support Team with any questions at 866-294-1660.
Warning: Connecting the Signal Booster directly to a cell phone with
use of an adapter will damage the cell phone and/or the
Signal Booster.
IMPORTANT NOTICE
It is very important to power your Signal Booster •
using a surge protected AC Power Strip with at
least a 1000 Joule rating.
Failure to do this will void your warranty in the •
event of a power surge or lightning strike.
Termékspecifikációk
| Márka: | Wilson Electronics |
| Kategória: | TV jelerősítő |
| Modell: | AG Pro 70 |
Szüksége van segítségre?
Ha segítségre van szüksége Wilson Electronics AG Pro 70, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók TV jelerősítő Wilson Electronics
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
Útmutatók TV jelerősítő
- TV jelerősítő Evolveo
- TV jelerősítő HQ
- TV jelerősítő LogiLink
- TV jelerősítő Hama
- TV jelerősítő Devolo
- TV jelerősítő One For All
- TV jelerősítő Konig
- TV jelerősítő Meliconi
- TV jelerősítő Kathrein
- TV jelerősítő SureCall
- TV jelerősítő Astro
- TV jelerősítő Hirschmann
- TV jelerősítő Steren
- TV jelerősítő Goobay
- TV jelerősítő Hager
- TV jelerősítő Wentronic
- TV jelerősítő Televés
- TV jelerősítő Winegard
- TV jelerősítő Antennas Direct
- TV jelerősítő Triax
- TV jelerősítő Epcom
- TV jelerősítő SmoothTalker
- TV jelerősítő ZBoost
- TV jelerősítő Axing
- TV jelerősítő Wilson
Legújabb útmutatók TV jelerősítő
12 December 2024
8 Október 2024
8 Október 2024
8 Október 2024
20 Szeptember 2024
13 Szeptember 2024
8 Szeptember 2024
7 Szeptember 2024
2 Szeptember 2024
2 Szeptember 2024