Használati útmutató Whirlpool YWMH53521HW

Whirlpool Magnetron YWMH53521HW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Whirlpool YWMH53521HW (32 oldal) a Magnetron kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/32

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration

in these installation instructions.

INSTRUCTIONS D’INSTALLATION

DE L’ENSEMBLE FOUR À MICRO-ONDES/HOTTE

Ce produit est conçu pour l’utilisation au-dessus d’appareils de cuisson électriques ou à gaz de 36 po (91,4 cm) de largeur ou moins.

Voir la section « Exigences d’installation » pour d’autres remarques.

Ces instructions d’installation sont valables pour plusieurs modèles. Il se peut que l’apparence de votre propre modèle soit légèrement

différente de celle montrée sur les illustrations dans ce document.

Table of Contents/Table des matières

W11496339A

MICROWAVE HOOD COMBINATION SAFETY ............................2

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2

Separate Cardboard Template .....................................................3

Location Requirements ................................................................3

Product Dimensions .....................................................................3

Electrical Requirements ...............................................................4

INSTALLATION INSTRUCTIONS ...................................................5

Remove Mounting Plate ...............................................................5

Rotate Blower Motor ....................................................................5

Locate Wall Stud(s) ......................................................................8

Mark Rear Wall .............................................................................9

Drill Holes in Rear Wall ...............................................................10

Attach Mounting Plate to Wall ...................................................10

Prepare Upper Cabinet ..............................................................11

Install Damper Assembly

(for wall venting only) ..................................................................11

Install the Microwave Oven ........................................................12

Complete Installation .................................................................13

VENTING DESIGN SPECIFICATIONS ........................................14

ASSISTANCE ................................................................................15

Replacement Parts .....................................................................15

Accessories ................................................................................15

SÉCURITÉ DE L’ENSEMBLE FOUR À

MICRO-ONDES/HOTTE...............................................................16

EXIGENCES D’INSTALLATION ...................................................16

Outillage et pièces ......................................................................16

Gabarit en carton séparé ...........................................................17

Exigences d’emplacement .........................................................17

Dimensions du produit ...............................................................18

Spéci cations électriques ..........................................................18

INSTRUCTIONS D’INSTALLATION .............................................19

Dépose de la plaque de montage ..............................................19

Réorientation du moteur du ventilateur .....................................19

Identi er la position du/des poteau(x) du colombage mural .....22

Tracé sur le mur arrière ..............................................................23

Perçage de trous dans le mur arrière .........................................24

Fixation de la plaque de montage sur le mur ............................24

Préparation du placard supérieur ..............................................25

Installation du module du clapet anti-re ux

(pour décharge à travers le mur uniquement) ............................25

Installation du four à micro-ondes .............................................26

Achever l’installation ..................................................................28

SPÉCIFICATIONS/CONCEPTION DU CIRCUIT

D’ÉVACUATION ...........................................................................28

ASSISTANCE ................................................................................30

Pièces de rechange ....................................................................30

Accessoires ................................................................................30

MICROWAVE HOOD COMBINATION SAFETY

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

■Measuring tape

■Pencil

■Masking tape or thumbtacks

■Scissors

■No. 2 Phillips screwdriver

■No. 3 Phillips screwdriver

for 1/4-20 x 3" (7.6 cm) bolts

■Drill

■3/16" (5 mm), 3/8" (1cm),

5/8" (1.6 cm) drill bits

■3/4" (1.9 cm) hole saw

■Diagonal wire cutting pliers

■Stud  nder

■7⁄16" (1.1 cm) socket wrench (or box wrench) for 1/4" x 2"

(6.4 mm x 5.1cm) lag screws

■11/2" (3.8 cm) diameter hole drill bit for wood or metal cabinet

■Keyhole saw

■Caulking gun and weatherproof caulking compound

■Duct tape

Parts Needed

For information on reordering, see the “Replacement Parts”

section.

NOTE: The hardware items listed here are for wood studs.

For other types of wall structures, be sure to use appropriate

fasteners.

NOTE: Depending on model, aluminum grease  lter and

charcoal  lter may be combined.

Materials Needed

Standard  ttings for wall or roof venting. See the “Venting Design

Speci cations” section.

A B C D E F G

A. 3/16-24 x 3" round-head

bolts (2)

B. 1/4-20 x 3"  at-head bolts (2)

C. Washers (2)

D. 3/16" toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F. #6 x 3/8" Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or

roof venting)

Not Shown:

■Mounting plate (attached to

back of microwave oven)

■Cardboard template (part of

packaging)

■Aluminum grease  lters

■Charcoal  lters (Depending

on model, charcoal  lters may

not be included. See User

Instructions.)

Separate Cardboard Template

The wall template and upper cabinet template is embedded in

the backside of the carton box. They are used as a rear wall

template and upper cabinet template.

1. Cut along the dotted line to separate the cardboard template

from the backside of the carton box.

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” and “Prepare Upper Cabinet” parts of

installation.

Location Requirements

Check the opening where the microwave oven will be installed.

The location must provide:

■Minimum installation dimensions. See the “Installation

Dimensions” illustration.

■Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and

minimum 3/8" (1 cm) thickness drywall or plaster/lath within

cabinet opening.

■Support for weight of 150 lbs (68 kg) which includes

microwave oven and items placed inside the microwave

oven and upper cabinet.

■Grounded electrical outlet inside upper cabinet. See the

“Electrical Requirements” section.

NOTES:

■If installing the microwave oven near a left sidewall, make

sure there is at least 6" (15.2 cm) of clearance between the

wall and the microwave oven so that the door can open fully.

■Some models have a pocket handle. If installing the

microwave near a right side wall, make sure there is at least

3" (7.6 cm) of clearance between wall and microwave oven

so you can grab the handle integrated inside the door.

■Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate, or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■Cutout must be free of any obstructions so that the vent  t

properly and the damper blade opens freely and fully.

For Roof Venting Installation Only:

■If you are using a rectangular-to-round transition piece, the

3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully.

See “Rectangular to Round Transition” illustration in the

“Venting Design Speci cations” section.

Installation Dimensions

NOTE: The grounded 3 prong outlet must be inside the upper

cabinet. See the “Electrical Requirements” section.

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary depending on type of range/cooktop

below.

NOTE: To ensure good performance, do not obstruct top vent

air ow. If cabinets are deeper than 14" (35.6 cm) but no more

than 15" (38.1 cm), use the bump out mounting kit replacing the

I bar mounting plate from the wall. The bump out mounting kit

(part # W11185746) is not provided but can be purchased from

Whirlpool.

Product Dimensions

*Overall depth of product will vary slightly depending on door

design.

A. 2" x 4" (5.1 x 10.2 cm) wall stud

B. Grounded 3 prong outlet

12" (30.5 cm) minimum

14" (35.6 cm) maximum

30"

(76.2 cm)

minimum

A B

upper cabinet and

side cabinet depth

30"

(76.2 cm)

typical*

66" (167.6 cm) minimum

I bar mounting plate

Bump out mounting bracket

12" DEEPER 14" 14" DEEPER 15"

¹⁄₄

(41.3 cm)

¹⁄₈

(43.5 cm)

+/-

3/16

(0.5 cm)

17"

Up to

(43.2 cm)*

cm)

⁷⁄₈

" (76.0

A. Backside of the carton box

B. Cardboard template (including Rear Wall template and Upper

Cabinet template)

Termékspecifikációk

Márka:	Whirlpool
Kategória:	Magnetron
Modell:	YWMH53521HW

Szüksége van segítségre?

Ha segítségre van szüksége Whirlpool YWMH53521HW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Magnetron Whirlpool

Whirlpool AMW 921 IXL Útmutató

30 Március 2025

Whirlpool amw 493 ix Útmutató

27 Március 2025

Whirlpool WMH31017HB Útmutató

16 Március 2025

Whirlpool avm 541 Útmutató

16 Január 2025

Whirlpool AMW 5023 Útmutató

16 Január 2025

Whirlpool AMW 843 IXL Útmutató

16 Január 2025

Whirlpool amw 842 ix Útmutató

16 Január 2025

Whirlpool AMW 497 IX Útmutató

16 Január 2025

Whirlpool AVM 687 Útmutató

16 Január 2025

Whirlpool amw 410 al Útmutató

16 Január 2025

Útmutatók Magnetron

Legújabb útmutatók Magnetron

Westinghouse WMB4425DSC Útmutató

31 Március 2025

De Dietrich dme 795 b Útmutató

31 Március 2025

CombiSteel 7455.1662 Útmutató

31 Március 2025

Hanseatic EC928ADK-S2BE Útmutató

30 Március 2025

Panasonic nn gd 357 wepg Útmutató

30 Március 2025

Candy CMGA 30DBST Útmutató

30 Március 2025

Candy CAMW25X Útmutató

30 Március 2025

Hisense H25MOBS7HUK Útmutató

30 Március 2025

CATA MC 25 ALV WH Útmutató

30 Március 2025

H.Koenig VIO6 Útmutató

29 Március 2025