Használati útmutató Whirlpool DSCX 10430

Whirlpool Szárítógép DSCX 10430

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Whirlpool DSCX 10430 (8 oldal) a Szárítógép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
1
EN
PRODUCT DESCRIPTION
APPLIANCE
Before using the appliance carefully read the
Health and Safety guide.
DAILY REFERENCE
GUIDE
CONTROL PANEL
1. Worktop
2. Control panel
3. Water tank
4. Door
5. Door handle
6. Door filter (behind
door)
7. Bottom filter (behind
flap)
8. Adjustable feet (4)
1. On/Off button (Reset if
long pressed)
2. Programme button
3. Settings button
4. Key lock
5. Steam option
6. Knob (Turn to select /
Press to confirm)
7. Finish in
8. Drying time
9. Dryness level
10. Options button
11. Start / Pause button
12. Display
13. Programmes area
1. 7.2.
12.
6. 8.4. 10.3. 9.5. 11.
1.
2.
3.
6.
4.
7.
8.
5.
13.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on http://www.whirlpool.eu/register
2
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the water tank is correctly inserted.
Make sure that the drain hose on the back of the dryer is xed
correctly, either to the dryer’s water tank, or to your domestic
sewage system (see Installation guide).
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HINTS
AND TIPS”.
Make sure that pockets are empty.
• Open the door and load the laundry.
Observe the maximum load sizes given in
the PROGRAMME CHART.
2. CLOSE THE DOOR
• Make sure that no laundry gets
stuck between door glass and door
lter.
• Close the door so that you can hear it click shut.
3. SWITCH ON DRYER
• Press the until the On/O button
programme button lights up. An animation
occurs, and there is a sound. Afterwards the dryer
is ready to be operated.
FIRST TIME USE
DAILY USE See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
Make sure that no lighters or
matches remain in the laundry.
Make sure that the laundry is
not soaked with flammable
liquids.
When switching on the dryer for the rst time, you will be asked to
• Set the desired language
• Adapt the value for your local water conductivity
• Set the dryer to recall the last used programme setting or not when switching it on.
Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND INDICATORS / Settings.
WARNING
3
EN
4. SET THE DESIRED PROGRAMME
GUIDED MODE - the button light will guide you through setting
your programme in the following order: selection of programme /
drying time (ONLY if Drying time or Airing programme is selected) /
dryness level (only if selectable/adjustable) / options. As soon as you
conrm a selection by pressing the knob, the button light will jump
to the next step.
• Select programme:
Make sure that the programme button lights up.
Turn the knob to select the desired programme. The indicator next
to the selected programme lights up. Conrm by pressing the knob.
Programme position oers a choice of special programmes,
which you can select by turning the knob; afterwards press the
knob to conrm the selected programme.
Find more information regarding programmes in the Programme
Chart.
• Select Drying time, if needed
ONLY if you have selected programme Drying time or
Airing, you can set the desired drying / airing time from a minimum
of 10 minutes to maximum 180 minutes (three hours).
Make sure that the Drying time button lights up. Turn the knob to
select the desired drying / airing time. Conrm it by pressing the
knob.
• Set dryness level, if needed
If you want to change the dryness level, make sure that the
Dryness level button lights up. Turn the knob to select the desired
dryness level, then press the knob to conrm.
• Select options, if needed
• If you want to select additional options, make sure that the
options button lights up. The options which are selectable
for your programme are indicated by lighting arrows .
Turn the knob to select the desired options. The symbol of the
selected option blinks. To conrm it, press the knob.
Some options / functions can be selected by directly pressing the
button:
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
INDIVIDUAL MODE
After you have switched on the dryer, you are not forced to follow
the GUIDED MODE.
It is up to you which order you choose to set your programme. To do
a setting, rst press the relevant button, then turn the knob to
select, and nally press the knob to conrm.
The variety of options and dryness levels depends on the
programme selected. Therefore it is recommended to start your
setting with selecting the programme.
5. START PROGRAMME
• Press and hold Start/Pause until the button lights up solidly;
the drying process starts.
• The duration can be recalculated and adapted in the course of
the programme. During such phases, an animation occurs on the
display.
6. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF
NEEDED
You can still change some settings after a programme was started:
Adjust drying time (only if programme Drying time or Airing is
selected):
Adjust or cancel “Finish in”, if a delay was selected and started
Add or cancel an option, provided the progress of the programme
still allows it.
• Press the relevant button. The selected setting will blink for a few
seconds.
• While blinking, you can adjust the setting by turning the knob. If
the value or setting stopped blinking, press the button again.
• Press the knob to conrm the modication. If you do not conrm,
the modication will be conrmed automatically – the modied
setting will stop blinking.
The programme will continue automatically.
To change the settings of a running programme or delay, you can
also:
• Press Start/Pause to put the running programme on pause
• Change your settings
• Press Start/Pause again to continue the programme.
7. RESET A RUNNING PROGRAMME, IF NEEDED
• Press and hold the On/O button until the display indicates
that the programme is cancelled.
8. SWITCH OFF THE DRYER AFTER PROGRAMME END
• The display indicates that the cycle has nished. Press On/
O to switch o the dryer. Open the door and take out your
laundry.
• The dryer will switch o automatically in about a quarter of an
hour after programme end, to save energy.
• If not switched o right after programme end, the dryer will
tumble the laundry for about 10 minutes, to prevent creasing.
The display shows an animation.
9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN
BOTTOM FILTER
• Refer to section CARE AND MAINTENANCE.

Termékspecifikációk

Márka: Whirlpool
Kategória: Szárítógép
Modell: DSCX 10430

Szüksége van segítségre?

Ha segítségre van szüksége Whirlpool DSCX 10430, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Szárítógép Whirlpool

Whirlpool

Whirlpool AZA-HP 7420 Útmutató

3 Április 2025
Whirlpool

Whirlpool awz 567 3 Útmutató

2 Április 2025
Whirlpool

Whirlpool awz 9995 Útmutató

1 Április 2025
Whirlpool

Whirlpool awz 568 3 Útmutató

31 Március 2025
Whirlpool

Whirlpool awz magic c Útmutató

30 Március 2025
Whirlpool

Whirlpool awz 899 Útmutató

28 Március 2025
Whirlpool

Whirlpool awz 221 Útmutató

27 Március 2025
Whirlpool

Whirlpool awz 9999 Útmutató

25 Március 2025
Whirlpool

Whirlpool C WD 104M WBS SPT Útmutató

25 Március 2025
Whirlpool

Whirlpool C WSD 74M WBS ES Útmutató

25 Március 2025

Útmutatók Szárítógép

Legújabb útmutatók Szárítógép

ELIN

ELIN KT 710 Útmutató

3 Április 2025
Zanussi

Zanussi ZDH8353W - LINDO 1000 Útmutató

2 Április 2025
Bauknecht

Bauknecht trkd prestige 6kg Útmutató

2 Április 2025
Bauknecht

Bauknecht trak 6460 1 Útmutató

1 Április 2025
Bauknecht

Bauknecht tras6110 Útmutató

31 Március 2025
Bosch

Bosch WQB235B40 Útmutató

31 Március 2025
Zanker

Zanker kt 2021 thermat Útmutató

30 Március 2025
Miele

Miele mistral novotronic Útmutató

30 Március 2025
Ariston

Ariston A44C Útmutató

30 Március 2025
Zanussi-electrolux

Zanussi-electrolux tcs 683 lt Útmutató

30 Március 2025