Használati útmutató Vitek VTD-TTAD24R2F

Vitek nincs kategorizálva VTD-TTAD24R2F

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vitek VTD-TTAD24R2F (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
VITEK
VITEK
FEATURES
• 1/3” 2.1 MegaPixel CMOS Sensor
• HD-TVI & AHD/CVBS Video Output
• 3.6mm Fixed Iris Lens (VTD-TTAD24R2F) / 2.8~12mm
Varifocal Lens (VTD-TTAD30R2V)
• 24 Infrared LED’s with 70’ IR Range (VTD-TTAD24R2F) /
30 Infrared LED’s with 100’ IR Range (VTD-TTAD30R2V)
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP66 Weather Resistance
• Supports Up The COAX Control
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• 12VDC Operation
VTD-TTAD24R2F
VTD-TTAD30R2V
2.1 Megapixel Outdoor HD-TVI/
AHD/CVBS IR Dome Cameras
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
7
8
9
10
1
2
Components and Accessories
Overview
Camera
User Manual
Drill Template
Screws
Hex Wrench
Lower Dome
Lens
HD-TVI Output
AHD/CVBS Output
Power Cable
Focus
Zoom
Lock Screw
1
2
3
4
5
6
7
8
3
4
5
6

Termékspecifikációk

Márka: Vitek
Kategória: nincs kategorizálva
Modell: VTD-TTAD24R2F

Szüksége van segítségre?

Ha segítségre van szüksége Vitek VTD-TTAD24R2F, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Vitek

Vitek

Vitek VTC-C594DN Útmutató

8 Október 2024
Vitek

Vitek VTC-C01P Útmutató

27 Szeptember 2024
Vitek

Vitek VT-1205A-D4B Útmutató

17 Szeptember 2024
Vitek

Vitek VTC-BM3FP Útmutató

14 Szeptember 2024
Vitek

Vitek VTC-THB5RV Útmutató

14 Szeptember 2024
Vitek

Vitek VTD-VH412VP4 Útmutató

13 Szeptember 2024
Vitek

Vitek VTD-HOCRAZ Útmutató

11 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva