Használati útmutató Vitek VTC-IRE40

Vitek nincs kategorizálva VTC-IRE40

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vitek VTC-IRE40 (26 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/26
VITEK
VTC-IRE40/2810
Long Range IR Bullet Camera
• High Density 1/3” EX-VIEW CCD & Effio-E DSP
• 700TVL High Resolution
• Advanced IR Optimizer eliminates washout and dramatically
reduces over saturation of IR illuminated video without engaging
the Image Signal Processor chip
• 40 Infrared LEDs at 850nm enable viewing in total darkness up
to 150 feet
• 0.003 Lux (F1.2 @ 40IRE) / 0 Lux with IR LEDs On
• E-WDR by Adaptive Tone Reproduction
• 2.8-10mm Varifocal Auto Iris Lens with External Adjustments for
Focus and Zoom
• True Day/Night by ICR - Infrared Cut Removal
• 2DNR Noise Reduction
• Motion Detection, Privacy Masking & Highlight Masking
• Dual Glass Compartments to Eliminate Glare
• OSD (On Screen Display) menu and Camera ID
• Heavy Duty IP68 rated weather/vandal resistant aluminum
construction is 100% water and dust proof
• OSD (On Screen Display) and Secondary Video Output
• 24VAC/12VDC Dual Voltage
1
Table of contents
1. Safety Instructions and Notes…......................................................................................................
2. General Descriptions............................................................................ ...……………………………
3. Supplied Items...................................................................................... ...……………………………
4. . .Part names…………………………… … .................................................. ...…………………………
5. Installation Instructions...................................................................................... .……………………
6. Setup Menu ……………............................................................................ ..…………………………
7. Specifications ……………………………………………….................................................................
8. Dimensional Drawings …………………………………………….......................................................
2
3
4
4
5
7
20
21
2
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
Warning (NTSC version) -- This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the . interference at their own expense
Caution -- Any changes or modifications in construction of this device that are not approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Notice -- this manual are processed to help comprehension and The images used in
may differ from the actual video of the camera.
1. Safety Instructions and Notes
• Please read these safety and operating instructions before placing the camera into operation.
• Keep the manual in a safe place for later reference.
• Pay attention to safety when laying the connection cable and observe that the cab tole is not subjected
heavy loads, kinks, damage or moisture.
• Never open the device boards or lensesto expose .
The warranty becomes void if repairs are undertaken by unauthorized persons.
• Only authorized service centers may perform maintenance or repairs.
• Use only a mild detergent to clean the housing.
• Keep the window surface clean of dirt or dust, which may reflect to the lens at night.infrared light in
• The camera should never be operated beyond the technical specifications. This can lead to destruction.
WARNING
Caution
To prevent electric shocks
and risk of fire hazards, do
NOT use other than specified
power source.

Termékspecifikációk

Márka: Vitek
Kategória: nincs kategorizálva
Modell: VTC-IRE40

Szüksége van segítségre?

Ha segítségre van szüksége Vitek VTC-IRE40, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Vitek

Vitek

Vitek VTC-C594DN Útmutató

8 Október 2024
Vitek

Vitek VT-TPTZ10HR-2T Útmutató

7 Október 2024
Vitek

Vitek VTM-LCD155P Útmutató

7 Október 2024
Vitek

Vitek VTC-T4T3HR2MD Útmutató

6 Október 2024
Vitek

Vitek VTC-C01P Útmutató

27 Szeptember 2024
Vitek

Vitek VT-1205A-D4B Útmutató

17 Szeptember 2024
Vitek

Vitek VTC-BM3FP Útmutató

14 Szeptember 2024
Vitek

Vitek VTC-THB5RV Útmutató

14 Szeptember 2024
Vitek

Vitek VTD-VH412VP4 Útmutató

13 Szeptember 2024
Vitek

Vitek VTD-HOCRAZ Útmutató

11 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025