Használati útmutató Vimar ELVOX 6029

Vimar Monitor ELVOX 6029

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vimar ELVOX 6029 (12 oldal) a Monitor kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
Manuale installatore - Installer guide
Manuel installateur - Technisches Handbuch
Instrucciones instalador - Manual do instalador
6029, 6029/C
Monitor serie Petrarca per Due Fili Plus
Petrarca series monitor for Due Fili Plus
Moniteur serie Petrarca pour Due Fili Plus
Monitor baureihe Petrarca für Due Fili Plus
Monitor serie Petrarca para Due Fili Plus
Monitor da série Petrarca para Due Fili Plus
Il monitor serie Petrarca 6029 o 6029/C sono da abbinare al citofono 6209 oppure 62I8 per impianti videocitofonici della
serie Due Fili Plus o Videokit Due Fili.
CARATTERISTICHE TECNICHE 6029
- Monitor da esterno parete con schermo in B/N, 3,5”
- Segnale video standard CCIR 625 linee, 50 quadri (su richiesta standard/EIA)
- Banda passante 4 MHz
CARATTERISTICHE TECNICHE 6029/C
- Monitor da esterno parete con schermo LCD a colori 3,5”
- Segnale video standard PAL.
MONTAGGIO MONITOR CON CITOFONO
Murare la staffa 6145 ad un’altezza di circa 1,40 m dal pavimento (Fig. 2).
Aprire il citofono, separare il coperchio dal fondo facendo forza nel lato inferiore del coperchio (Fig. 3, 4).
Inserire il fondo del citofono sulla parte sinistra della staffa inlandolo nelle apposite sedi e tirandolo verso il basso no al
suo completo bloccaggio. Eseguire i collegamenti sui morsetti del citofono e della scheda del monitor (Fig. 5).
Collegare il cablaggio del monitor alla scheda del citofono tramite il connettore “VIDEO” della scheda.
Inserire il monitor appoggiandolo nelle apposite sedi e tirandolo verso il basso no al suo completo bloccaggio (Fig. 6).
Chiudere il citofono agganciando il cofano alla parte superiore del fondo e premere sulla parte inferiore del cofano no al
raggiungimento dello scatto. Per estrarre il citofono o il monitor dalla staffa, agire con un cacciavite sulla linguetta di sicu-
rezza ed estrarli seguendo il senso delle frecce (Fig. 7).
MONTAGGIO DEL KIT DI TRASFORMAZIONE DA TAVOLO PER MONITOR E CITOFONI
Aprire il citofono, separare il coperchio dal fondo facendo forza nel lato inferiore del coperchio (Fig. 3, 4).
Inserire il fondo del citofono sulla parte sinistra della staffa inlandolo nelle apposite sedi e tirandolo verso il basso no al
suo completo bloccaggio. Eseguire i collegamenti sui morsetti del citofono e della scheda del monitor (Fig. 9).
Collegare il cablaggio del monitor alla scheda del citofono tramite il connettore video della scheda. Inserire il monitor appog-
giandolo nelle apposite sedi e tirandolo verso il basso no al suo completo bloccaggio (Fig. 9).
Chiudere il citofono agganciando il cofano alla parte superiore del fondo e premere sulla parte inferiore del cofano no al
raggiungimento dello scatto. Per estrarre il citofono o il monitor dalla staffa, agire con un cacciavite sulla linguetta di sicu-
rezza ed estrarli seguendo il senso delle frecce (Fig. 9).
2
Petrarca: 6029 - 6029/C
Petrarca series monitor 6029 or 6029/C can work in conjunction with interphone 6209 or 62I8 for video door entry systems
series Due Fili Plus or Two wires Videokit.
TECHNICAL CHARACTERISTICS OF 6029
- Wall-mounted monitor with B/W screen, 3,5”
- Video signal standard: CCIR with 625 lines and 50 frames (EIA standard available on request)
- Passband: 4 MHz
TECHNICAL CHARACTERISTICS OF 6029/C
- Wall-mounted monitor with LCD colour screen, 3,5”
- Video signal standard: PAL
INSTALLATION INSTRUCTIONS
Fix the bracket type 6145 to the wall at a height of approximately 1.4 m above the ground (Fig. 2).
Open the interphone, split the cover from the bottom making pressure on the lower side of the cover (Fig. 3 - 4).
Fit the base of the interphone into the appropriate seats to the left of the bracket. Slide the base of the interphone downwards
until it is completely fastened. Connect the wires to the terminals of the interphone and monitor card (Fig. 5)
Connect the wiring of the monitor to the connection card by means of connector CN1 on the card.
Fit the monitor in the appropriate seats in the bracket. Slide the base of the monitor downwards until it is completely fastened
(Fig. 6).
Close the interphone by hooking the cover onto the base and pressing the bottom of the cover until it clicks shut. To remove
the interphone or monitor from the bracket, press the safety tab with a screwdriver in the direction of the arrows (Fig. 7).
DESK-TOP CONVERSION KIT FOR MONITOR AND INTERPHONES
Open the interphone, split the cover from the bottom making pressure on the lower side of the cover (Fig. 3, 4).
Fit the base of the interphone into the appropriate seats to the left of the bracket. Slide the base of the interphone downwards
until it is completely fastened. Connect the wires to the terminals of the interphone and monitor card (Fig. 9).
Connect the wiring of the monitor to the connection card by means of connector CN1 on the card.
Fit the monitor in the appropriate seats in the bracket. Slide the base of the monitor downwards until it is completely fastened
(Fig. 9).
Close the interphone by hooking the cover onto the base and pressing the bottom of the cover until it clicks shut. To remove
the interphone or monitor from the bracket, press the safety tab with a screwdriver in the direction of the arrows (Fig. 9).
3
Petrarca: 6029 - 6029/C

Termékspecifikációk

Márka: Vimar
Kategória: Monitor
Modell: ELVOX 6029

Szüksége van segítségre?

Ha segítségre van szüksége Vimar ELVOX 6029, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Vimar

Útmutatók Monitor

Legújabb útmutatók Monitor

Marshall

Marshall V-LCD17H Útmutató

16 Október 2024
Bauhn

Bauhn APMTR-0624 Útmutató

15 Október 2024
Acer

Acer KA270H Útmutató

14 Október 2024
NEC

NEC E424 Útmutató

14 Október 2024
Asus

Asus VP249HR Útmutató

13 Október 2024
Acer

Acer EK220QB Útmutató

13 Október 2024