Használati útmutató Viking DCCE1210CS

Viking Páraelszívó DCCE1210CS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Viking DCCE1210CS (2 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
F1656B EN (031308J)
Viking Installation Guide
Built-In Rangehood Accessories
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
BACKSPLASH
BACKSPLASH
BACKSPLASH
BACKSPLASHBACKSPLASH
The backsplash is used to cover the wall space
between the top of the backguard or high shelf
and the bottom of the hood.
Place the backsplash in the desired location.
Secure to the wall by placing the screws that are
provided in the holes on the backsplash. When
screws are used to fasten the panel to materials
other than wood, the appropriate type anchor
should be used with the screws.
Backsplash Screw
holes
WARMING SHELF
WARMING SHELF
WARMING SHELF
WARMING SHELF WARMING SHELF P
P
P
PPANEL
ANEL
ANEL
ANELANEL
Always
Always
Always
Always Always install
install
install
install install the
the
the
the the warming
warming
warming
warming warming shelf
shelf
shelf
shelf shelf panel
panel
panel
panelpanel
before installing
before installing
before installing
before installing before installing the
the
the
the the rangehood.
rangehood.
rangehood.
rangehood. rangehood.
The warming shelf panel is usually
placed on the wall just below the
rangehood.
1. Place the bottom of the warming
shelf panel in the desired location
and secure to the wall.
2. Hook the bottom of the top
section to the top of the bottom
section and secure to the wall.
3. Install the rangehood so that it will
rest on the top ledge of the
warming shelf panel.
BOTTOM
TOP
Hook top section
to bottom section
Hood should rest on this top ledge
HOOD
HOOD
HOOD
HOOD HOOD DUCT
DUCT
DUCT
DUCT DUCT COVER
COVER
COVER
COVERCOVER
1. Mount duct cover to the ceiling through the screw holes provided. Secure to solid ceiling joists
to support the weight with the screws provided.
2. For wall hood models, after mounting the duct cover to the ceiling, attach the hood to the wall
and then secure the hood to duct cover using the sheet metal screws provided.
3. For island hood models, after mounting the duct cover to the ceiling, secure the hood by
tightening the bolts into the cage-nuts of the duct cover.
WALL RANGEHOOD
WALL RANGEHOOD
WALL RANGEHOOD
WALL RANGEHOOD WALL RANGEHOOD DUCT
DUCT
DUCT
DUCT DUCT COVER
COVER
COVER
COVERCOVER ISLAND
ISLAND
ISLAND
ISLAND ISLAND RANGEHOOD
RANGEHOOD
RANGEHOOD
RANGEHOOD RANGEHOOD DUCT
DUCT
DUCT
DUCT DUCT COVER
COVER
COVER
COVERCOVER
Larger holes on
top
Smaller holes
on bottom
sheet metal screws bolts
Cage nuts
on bottom
2 3

Termékspecifikációk

Márka: Viking
Kategória: Páraelszívó
Modell: DCCE1210CS

Szüksége van segítségre?

Ha segítségre van szüksége Viking DCCE1210CS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Páraelszívó Viking

Viking

Viking TVWH480DB Útmutató

6 Október 2024
Viking

Viking VWH3010RE Útmutató

23 Szeptember 2024
Viking

Viking VWH3610RE Útmutató

9 Szeptember 2024
Viking

Viking VCIH54208VC Útmutató

30 Augusztus 2024
Viking

Viking VWH530481DG Útmutató

25 Augusztus 2024
Viking

Viking VCIH56608SS Útmutató

23 Augusztus 2024
Viking

Viking TVWH480BW Útmutató

20 Augusztus 2024
Viking

Viking TVWH360FW Útmutató

13 Augusztus 2024
Viking

Viking VWH3010AR Útmutató

10 Augusztus 2024
Viking

Viking TVWH660AW Útmutató

10 Augusztus 2024

Útmutatók Páraelszívó

Legújabb útmutatók Páraelszívó