Használati útmutató Victron BlueSolar PWM 12 24V-20A LCD USB

Victron Akkumulátor töltő BlueSolar PWM 12 24V-20A LCD USB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Victron BlueSolar PWM 12 24V-20A LCD USB (61 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/61
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Manual
SE
IT
Appendix
BlueSolar PWM Charge Controller LCD - USB
12V | 24V | 5A
12V | 24V | 10A
12V | 24V | 20A
1
EN NL FR DE ES SV IT Appendix
1. General Information
The BlueSolar PWM Charge Controller series uses Pulse Width Modulation (PWM)
charge voltage control combined with a multistage charge control algorithm.
2. Features
Three stage battery charging [bulk absorption – float]
Battery type: Lead-acid and LiFePO4 (with internal BMS)
Protected against over current.
Protected against short circuit.
Protected against reverse polarity connection of the solar panels and/or battery.
Low voltage load disconnect.
Temperature protection.
3. Installation
Important note: always connect the batteries first.
IMPORTANT
Always connect the battery first, in order to allow the Controller
to recognize system voltage
Use a 12V (36 cells) solar array for a 12V system.
Use a 24V (72 cells) solar array for a 24V system.

Termékspecifikációk

Márka: Victron
Kategória: Akkumulátor töltő
Modell: BlueSolar PWM 12 24V-20A LCD USB

Szüksége van segítségre?

Ha segítségre van szüksége Victron BlueSolar PWM 12 24V-20A LCD USB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Akkumulátor töltő Victron

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő