Használati útmutató Velleman K7302

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Velleman K7302 (12 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
UNIVERSAL BATTERY CHARGER
K7302
ILLUSTRATED ASSEMBLY MANUAL H7302IP-1
Total solder points: 20
Difficulty level: beginner 1 2 3 4   5 advanced
Low cost soluton for charging of
both NiCd and NiMh batteries.
2
Specifications:
Charges Ni Cd or Ni MH batteries.
Ideal for in car use.
Transforms a mains adapter into a charger (adapter socket included).
Charge cellular phone, toys, portables, video batteries …
Selectable charge current.
LED charge indication.
Features:
Charge current (±20%): 50mA, 100mA, 200mA, 300mA, 400mA. (selectable)
Supply voltage: from 6.5VDC to 21VDC (depending on used battery)
Supply current: same as charge current.
Power supply polarity protected.
LED function indication.
Dimensions: 40 x 60 mm
Fits in G403 type housing
Features & Specifications
3
Assembly hints
1. Assembly (Skipping this can lead to troubles ! )
Ok, so we have your attention. These hints will help you to make this project successful. Read them carefully.
1.1 Make sure you have the right tools:
A good quality soldering iron (25-40W) with a small tip.
Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the tip, to give it a wet look. This is called ‘thinning’ and will
protect the tip, and enables you to make good connections. When solder rolls off the tip, it needs cleaning.
Thin raisin-core solder. Do not use any flux or grease.
A diagonal cutter to trim excess wires. To avoid injury when cutting excess leads, hold the lead so they
cannot fly towards the eyes.
Needle nose pliers, for bending leads, or to hold components in place.
Small blade and Phillips screwdrivers. A basic range is fine.
For some projects, a basic multi-meter is required, or might be handy
1.2 Assembly Hints :
Make sure the skill level matches your experience, to avoid disappointments.
Follow the instructions carefully. Read and understand the entire step before you perform each operation.
Perform the assembly in the correct order as stated in this manual
Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.
Values on the circuit diagram are subject to changes.
Values in this assembly guide are correct*
Use the check-boxes to mark your progress.
Please read the included information on safety and customer service
* Typographical inaccuracies excluded. Always look for possible last minute manual updates, indicated as ‘NOTE’ on a separate leaflet.
0.0 0
0

Termékspecifikációk

Márka: Velleman
Kategória: Akkumulátor töltő
Modell: K7302

Szüksége van segítségre?

Ha segítségre van szüksége Velleman K7302, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Akkumulátor töltő Velleman

Velleman

Velleman VLEVP1 Útmutató

23 Szeptember 2024
Velleman

Velleman PSS1303 Útmutató

19 Augusztus 2024
Velleman

Velleman LABPS3005N Útmutató

18 Augusztus 2024
Velleman

Velleman FPS1320 Útmutató

18 Augusztus 2024
Velleman

Velleman LBPS3005DN Útmutató

17 Augusztus 2024
Velleman

Velleman LBPS3060SM Útmutató

17 Augusztus 2024
Velleman

Velleman LBPSHH01 Útmutató

17 Augusztus 2024
Velleman

Velleman LBPS3005 Útmutató

17 Augusztus 2024
Velleman

Velleman PS3020 Útmutató

17 Augusztus 2024
Velleman

Velleman SOL5N Útmutató

9 Augusztus 2024

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő