Használati útmutató Turtle Beach Ear Force X32

Turtle Beach fejhallgató Ear Force X32

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Turtle Beach Ear Force X32 (28 oldal) a fejhallgató kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/28
1
WiFi
5GHz
User Guide
What’s in the Box
product support and warranty information:
www.TurtleBeach.com/support
X32 Headset
X32 Wireless Digital
RF Transmitter
(2) AAA Batteries
Xbox 360
Talkback Cable
Turtle Beach Sticker
T
U
R
T
L
E
B
E
A
C
H
.
C
O
M
RCA Splitter Cable
TONE
R
X32 Headset pg 1
X32 Transmitter
Overview pg 2
Using the Transmitter pg 3
Pairing the Headset and Transmitter pg 4
Setup pg 5
Equalizer and Sound Field Expander Presets pg 13
Chat Boost™ pg 15
Technical Specifications pg 16
Troubleshooting pg 17
Important Safety Information pg 17
Table of Contents
1
OPEN
TONE
X32 Headset
Tone Button: Press this button to activate the
different EQ presets. A beep will indicate which
preset is selected. (see pg. 13)
Xbox Controller Jack: Insert the straight
connector on the Talkback Cable here. (see pg. 10)
Effects Button: Press this button to activate
the different Sound Field presets. A beep will
indicate which preset is selected. (see pg. 14)
Game Volume: Turn to adjust the game sound
level. The Xbox LIVE chat volume may be
independently set by the volume control on the
Talkback Cable.
Power Button: To turn on the headset, press and
hold the power button for a couple of seconds,
then release. You will hear 2 beeps and the power
LED should start flashing. Turn off the headset by
pressing the button until the LED stays on and you
hear 2 beeps, then release. To enter Pairing Mode,
power off the headset, then press and hold the
power button for about 6 seconds until you hear
the second double beep and the LED begins to
flash rapidly (see pg 4). The headset will turn off
after several minutes if there’s no audio detected
or if the transmitter is turned off.
Battery Compartment Cover
Slide down the panel on the right ear cup to
access the battery compartment. The headset
is powered by (2) AAA batteries (included)
which should provide up to 15 hours of use.
Rechargeable NiMH batteries may also be used.
A tone will sound every 6 seconds when battery
power is low.
NOTE: Be sure to insert the batteries as shown.
1
2
3
4
5
5
6
6
4
3
1
2
2
X32 Transmitter
1
2
3
4
Power/Link LED: When the transmitter is powered on and
communicating with the headset, this LED will be on solid. When the
headset is turned off, the LED on the transmitter will turn off. A slowly
pulsing LED indicates that the transmitter can’t communicate with the
headset. This could happen when the headset is out of range or not
paired with the transmitter. (see pgs. 3-4)
Game Audio Input Jack
Insert the 3.5 mm end of the included RCA Splitter Cable into this jack.
Auxiliary Input Jack: Provides a 3.5 mm input for digital music players
or additional audio sources. (3.5 mm cable sold separately)
Pairing Button: Press and hold to activate pairing mode. (See pg. 4)
1
2 3 4
3
Using the Transmitter
Transmitter Range
The transmitter sends game audio from your Xbox 360
® to the headset via digital radio frequency (RF) signal, so a direct line of sight is not
required. When you’re out of range, you may hear popping or clicking sounds if the headset loses the RF signal. For best performance,
place the transmitter in an open area that is unobstructed by objects that might absorb RF signals from the internal antenna. Avoid placing
it on a metal surface, such as the top of a home theater A/V receiver.
Optimum range: within 30 ft.
Dual-Band WiFi
The X32 uses advanced “Dual-Band WiFi” radio technology to help eliminate interference with additional wireless devices and WiFi
networks. The dual-band radio uses both 5 GHz and 2.4 GHz signals to transmit high fidelity digital audio and help eliminate interference
with other wireless devices. Unlike the RF technology used in most other wireless headsets, this dual-band WiFi radio technology coexists
with wireless networks for optimum performance.
TO NE
R
dual band wireless
WiFi
5GHz
4
TO NE
Pairing the Headset and Transmitter
The headset and transmitter in this package are “paired”, which means they’re synchronized to ensure they work together. When the
headset and transmitter are communicating, the LED on the front panel of the transmitter will be on solid. If this LED is instead pulsing
slowly, it means the transmitter can’t communicate with the headset. This could happen when the headset is out of range or not paired
with the transmitter. If the LED is pulsing slowly when the headset is on and within range, then they might need to be “paired” as
described below.
The headset and transmitter are paired out of the box, so the following instructions are necessary only if pairing appears to have been lost.
NOTE: Only one headset can be paired with the transmitter. If you pair two headsets with the same transmitter, they’ll interfere with
each other as they compete for the transmitter RF signal. This will cause one headset to shut off. So don’t try to pair two headsets with
the same transmitter!
1. headset and transmitter are turned offMake sure the and
they are away from each other. at least 2 feet
2. Power on the transmitter by connecting it to a free USB
port on your gaming console. Then press and hold the PAIR
button on the transmitter for about 5 seconds. Release the
PAIR button when the transmitter’s Power/Link LED begins
to flash rapidly (twice per second). NOTE: If you hold the
transmitter’s PAIR button for too long (over 20 seconds), the
light will blink extremely quickly, and you will need to start
over from step 1.
3. Press and hold the headset Power button for about 6
seconds until you hear the second double beep, then
release the Power button. At this point, the headset LED
will flash rapidly (twice per second).
4. Wait for the headset and transmitter to pair. This process
could take up to 30 seconds.
If pairing is successful, the Power/Link LED on the
transmitter should be on solid and the headset LED should
be flashing about once per second, indicating that the units
are paired.
If pairing fails, repeat steps 1-4. It may take up to 5 attempts
to pair successfully.
2 feet
Maintain a distance of at least
2 feet between the headset and
transmitter when pairing.
5
Xbox 360
®
Setup (HDMI)
*Older Xbox 360 models and Xbox 360 Slim models require an Xbox 360 Audio Adapter for audio output when used with an HDMI connection (available
from TurtleBeach.com). Xbox 360 E consoles do not require an Xbox 360 Audio Adapter. NOTE: If your HDMI TV has red/white RCA AUDIO OUT jacks, you
can use them to feed the sound from your TV to your Turtle Beach transmitter. (AUDIO IN jacks will not send sound out to your transmitter; you need AUDIO
OUT as shown in the alternate setup.)
Xbox 360
Audio Adapter Cable*
(sold separately)
HDMI
Transmitter USB Cable
RCA Splitter Cable
(included)
6
Xbox 360
®
Setup (HDMI)
(Alternate Setup)
HDMI
Transmitter USB Cable
RCA Splitter Cable
(included)
7
Xbox 360
®
E Setup (HDMI)
8
Xbox 360
®
E Setup (Composite)
audio/video in
9
Xbox 360
®
Setup (RCA)
Xbox 360
AV Cable
Transmitter USB Cable
RCA Splitter Cable
(included)
audio/video in
10
Configure Xbox 360 Settings
1. Insert the right angle plug into the headphone
jack on the Xbox 360 controller.
2. Insert straight plug into the controller jack on the
left ear cup of the headset.
Xbox 360 Chat Setup
1. Press the Xbox 360 Guide Button, then select
“Settings > Preferences > Voice”
2. Voice Volume = 10
3. Game Volume = 10
4. Voice Output = Play Through Headset
Voice Volume 10
Voice
Mute Kinect
Voice Output
Play Through Headset
Play Through Speakers
Voice Output
Game Volume 10
TONE
R
Chat VolumeMic Mute
Xbox 360 Controller
Xbox 360
Talkback Cable
Xbox 360
Input
11
Connecting a Digital Music Player
The X32 features an Auxiliary Input for connecting digital music players or other analog sources so you can listen to your
own music along with the game audio. The Auxiliary Input volume can be adjusted directly from the digital music player.
Digital Music
Player
Auxiliary Input
3.5 mm Cable
(sold separately)
Connect the digital music player to the
Auxiliary Input if you want to hear the
music along with the game audio.
DUAL
BAND
LI
NE
INAUX IN
12
Transmitter USB Cable*
3.5 mm Cable
(included with
DSS2)
Digital Optical
Cable
(included with
DSS2)
USB Power Cable
(included with
DSS2)
Connecting a DSS or DSS2
The X32 can be upgraded to Dolby
® Digital surround sound by adding the Ear Force DSS or DSS2 surround sound processors
(sold separately). Visit www.turtlebeach.com/DSS2 to learn how you can upgrade your X32 headset with surround sound.
*Both the X32 transmitter USB cable and the DSS/DSS2 USB power cable
must be plugged into separate USB ports directly on the Xbox 360 console
for power. Do not plug the transmitter USB cable into the USB OUT port
on the DSS or DSS2, as this may cause overloading of the USB ports.
X32 Stereo
Sound Field
X32 Sound Field with Dolby Digital
Surround Sound Processing
Setup
Add a DSS or DSS2 to Upgrade
to Surround Sound
13
Tone (EQ) Presets
The X32 features multiple Equalizer presets to enhance your gaming audio experience. Press the
TONE button on the X32 headset to cycle through the EQ presets as illustrated below:
Equalizer (EQ) Presets:
1. Flat
2. Bass Boost
3. Treble Boost
4. Bass and Treble Boost
The number of beeps in the headset
indicates which of the 4 EQ presets
has been selected.
TONE
Tone Button
14
Effects (Sound Field Expander) Presets
Effects (Sound Field Expander) Presets:
1. Normal
2. Narrow
3. Wide
The number of beeps in the headset indicates which of
the 3 Sound Field Expander presets has been selected.
The Sound Field Expander improves your ability to hear sounds coming from a distance by boosting sounds on the left and right sides
and lowering sounds in the center. Press the EFFECTS button to cycle through the three settings as illustrated below:
Effects Button
15
Chat Boost
™
Chat Boost is a dynamic talkback expander built into the X32 headset that automatically increases chat volume during loud
moments in your game, so you can always hear your teammates or other players, regardless of the game volume.
Typically, if you turn up a headset’s game volume, the incoming chat level from other players could become difficult to hear
over the game sound. However, with Chat Boost, as the game audio increases, the chat volume also increases. When the game
volume quiets down again, Chat Boost automatically returns the chat level to your original volume setting.
To properly set the Chat Boost function:
1. Turn down the volume control on the headset so there’s no game audio.
2. Adjust the volume control on the Talkback Cable so you can hear the chat voices at a comfortable level.
3. Turn up the headset game volume and the chat volume will increase whenever the game gets louder, just as if the talkback
volume control is being automatically turned up along with the game level. Note that if the volume on the Talkback Cable
is set too loud, Chat Boost might increase the volume so much that the voices will distort. If that happens, turn down the
talkback volume on the Talkback Cable.
WITHOUT Chat Boost,
chat volume is overwhelmed by loud game audio
WITH Chat Boost,
chat volume increases along with game
volume, so you can always hear teammates
16
X32 Transmitter Technical Specifications
· 50mm diameter speakers with neodymium magnets
· Game audio frequency response: 20Hz - 20kHz, >120dB SPL @ 1kHz
· Condenser microphone frequency response: 50Hz - 15kHz
· Game audio Dual Band WiFi Digital 2.4GHz/5.8GHz RF wireless reception
· Headphone amplifier: Stereo 27mW/ch, THD <1%
· Operates on (2) AAA batteries or (2) AAA rechargeable NiMH batteries
· Automatic shut down after approx 5 minutes of carrier loss or audio silence to conserve battery power
· Battery booster circuit extends battery life for up to 15 hours
· Dual Band WiFi Digital 2.4GHz/5.8GHz RF wireless transmission with up to 30 foot range
· Frequency response: 20Hz - 20kHz
· Stereo 3.5mm line input jack
· Stereo 3.5mm aux input jack
· Maximum analog input level: 2Vpp (700mV rms)
· USB Power – (5V DC @ 180mA max)
X32 Headset Technical Specifications
17
Troubleshooting
No sound
• Check that the headset volume control is turned up.
• Check that the transmitter USB power and Line In cables are properly connected.
• Check that the headset is powered on. The LED on the left ear cup should be ashing.
• Check if the LED on the front of the transmitter is on solid. If the LED is slowly pulsing, it indicates that the transmitter isn’t
communicating with the headset. If the headset is on solid and the transmitter LED is slowly pulsing, then the headset and
transmitter need to be “paired” as described in the section “Pairing the Headset and Transmitter”.
Audio Drops, Popping or Clicking Sounds
Audio dropouts, popping or clicking sounds on the headset are caused by poor reception. This can occur when:
• The headset and transmitter are out of range. For best performance, stand within 20 feet from the transmitter.
• There’s a wall or other large object between the headset and transmitter.
• The transmitter is in a bad location that is interfering with the antenna.
• A wireless base station or wireless router is causing a lot of RF activity that’s blocking the RF signal from the transmitter.
Voice Chat Drops
• Most in-game voice chat drops are simply caused by network performance or “lag”. Usually they subside after a few moments so
please be patient. In extreme cases, you may have to leave a game and return to reset the chat function.
• If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction.
A wired connection from your modem/router to your console is recommended for best results.
Safety Notice
To avoid potential damage to the device, always disconnect all cables before transporting it.
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important
to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can still
damage your hearing. If you experience ringing in your ears after listening with the headset, it means the volume is set too loud.
The louder the volume is set, the less time it takes to affect your hearing. So, please take care to listen at moderate levels.
• Before placing a headset on your ears, turn the volume down completely,
then slowly increase it to a comfortable level.
• Turn down the volume if you can’t hear people speaking near you.
• Avoid turning up the volume to block out noisy surroundings.
18
Manufacturer: Voyetra Turtle Beach
Manufacturers Address: 100 Summit Lake Drive, Suite 100, Valhalla, NY 10595
Product Name: Ear Force X32
Type of Product: Wireless Headset
Model Number(s): TBS-2265-01
Year of Manufacture: 2011
We, Voyetra Turtle Beach, Inc. of Elmsford, New York, declare under our own responsibility that the above-referenced product complies
with the following directives and standards:
Low Voltage Directive 2006/95/EC
EN 50332-2:2003
EN 60950-1:2006+A11:2009
Electromagnetic Compatibility Directive 1999/5/EC
ESTI EN 301 489-1 V1.8.1 (2008)
ESTI EN 301 489-3 V1.4.1 (2002)
ESTI EN 301 489-17 V2.1.1 (2009)
R&TTE Directive 1999/5/EC
ESTI EN 300 328 V1.7.1 (2006-10)
ESTI EN 300 440-1 V1.4.1 (2008-05)
ESTI EN 300 440-2 V1.2.1 (2008-05)
All test reports have been reviewed and approved with a Positive Opinion from the following Notified Bodies:
The technical documentation required by this Directive is maintained at the corporate headquarters of Voyetra Turtle Beach,
100 Summit Lake Drive, Suite 100, Valhalla, NY 10595
Authorized Person:
____________________________ Date:________________
Printed Name: Frederick Romano
Title: Executive Vice President
EC Declaration of Conformity
11/17/11
Bay Area Compliance Laboratories, Corp (Shenzhen)
6/F, the 3rd Phase of WanLi Industrial Building
ShiHua Road, FuTian Free Trade Zone, Shenzhen, Guangdong, China
Tel: +86-755-33320018, Fax: +86-755-33320008, Web: baclcorp.com
Shenzhen EBO Technology Co., Ltd.
No. 710 Yihua Building, Futian District, Shenzhen, China 518040
Tel: +86-755-29451282 Fax: 86-755-83709189 Web: ebotek.cn

Termékspecifikációk

Márka: Turtle Beach
Kategória: fejhallgató
Modell: Ear Force X32

Szüksége van segítségre?

Ha segítségre van szüksége Turtle Beach Ear Force X32, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók fejhallgató Turtle Beach

Turtle Beach

Turtle Beach ZBX0HW68232 Útmutató

10 Október 2024
Turtle Beach

Turtle Beach Ear Force Recon 50P Útmutató

7 Október 2024
Turtle Beach

Turtle Beach Recon 50 Útmutató

5 Október 2024
Turtle Beach

Turtle Beach Elite Pro Útmutató

3 Október 2024
Turtle Beach

Turtle Beach Earforce i30 Útmutató

1 Október 2024
Turtle Beach

Turtle Beach Earforce ZLA Útmutató

30 Szeptember 2024
Turtle Beach

Turtle Beach Ear Force XLa Útmutató

22 Szeptember 2024
Turtle Beach

Turtle Beach Ear Force Recon 70P Útmutató

22 Szeptember 2024
Turtle Beach

Turtle Beach Ear Force DP11 Útmutató

17 Szeptember 2024
Turtle Beach

Turtle Beach TB033904 Útmutató

11 Szeptember 2024

Útmutatók fejhallgató

Legújabb útmutatók fejhallgató

Steelseries

Steelseries Arctis Nova 5X Útmutató

10 Április 2025
NACON

NACON RIG 900 MAX HX Útmutató

9 Április 2025
Meze Audio

Meze Audio POET Útmutató

9 Április 2025
Sennheiser

Sennheiser CX 5.00G Útmutató

8 Április 2025
Anchor Audio

Anchor Audio PRO-540/1D3S Útmutató

6 Április 2025
Trust

Trust Nouna 25277 Útmutató

3 Április 2025
PowerLocus

PowerLocus P2 Útmutató

3 Április 2025
Sennheiser

Sennheiser RS 120-W Útmutató

2 Április 2025
Celly

Celly SHEER Útmutató

2 Április 2025
Behringer

Behringer SD251-CL PRO Útmutató

1 Április 2025