Használati útmutató Tripp Lite PDUBHV101U

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite PDUBHV101U (32 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/32
1. Introduction 2
2. Product Overview 2
3. Important Safety Warnings 4
4. Installation 4
5. Warranty & Product Registration 8
Owner’s Manual
PDU & Maintenance
Bypass Switch Module
Models:
PDUB151U (Series Number: AG-0514)
PDUB201U (Series Number: AG-0515)
PDUBHV101U (Series Number: AG-0516)
PDUBHV201U (Series Number: AG-0517)
PDUBHV20B (Series Number: AG-0518)
PDUBHV20D (Series Number: AG-0519)
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
Español 9 • Français 17 • Русский 25
2
B 2 8
C
1 D 5 3 4 6 A
B 2 8
C 7
1 D 5 3 4 6 A
7
B 2 8
C
1 D 5 3 4 6 A
B 2 8
C
1 D 5 3 4 6 A
B 2 8
C
1 D 5 3 4 6 A
B 2 8
C
1 D 5 3 4 6 A
Figure 1: Rack Mounting Figure 2: Wall Mounting
This product is used as an external power distribution unit in conjunction with UPS systems. It enables the user to manually
transfer the connected equipment to utility power via a bypass switch, permitting scheduled maintenance or UPS replacement
without interruption of connected equipment.
The optional ECO Switching feature enables power savings by automatically powering off Controllable Output Receptacle Group
outlets when the device connected to the master outlet is powered off or goes into a low-power consumption mode.
Rack Mount or Wall Mount the Unit
The module can be mounted to a 19-inch enclosure or wall. Follow Figure 1 for rack mounting or Figure 2 for wall mounting.
1. Introduction
WALL
2. Product Overview
PDUBHV101U PDUB151U
PDUBHV201U PDUB201U
PDUBHV20B PDUBHV20D
3
1 Master Output Receptacle(s)
UPS-supported outlet with optional current sense capability. This connection is labeled MASTER on the Bypass PDU.
2 Controllable Output Receptacle Group
UPS-supported outlets with optional power switching capability. These connections are labeled CONTROLLABLE GROUP on
the Bypass PDU.
3 Protected UPS Input Power Connection
Connect to a protected UPS output receptacle. This connection is labeled TO UPS OUTPUT on the Bypass PDU.
4 Outlet for UPS Input Power Cord
Connect the UPS input cord here. This connection is labeled TO UPS INPUT on the Bypass PDU.
5 Bypass Switch
Set switch to NORMAL for standard protected UPS operation. Set switch to BYPASS during UPS replacement.
6 Mains AC Inlet/Cord
Connect AC input cord to any compatible mains power source. This connection is labeled MAIN POWER on the Bypass PDU.
7 Circuit Breaker (select models)
8 Enable ECO Load Control Switch
Select DISABLE for always-on operation of controllable outlets. Select ENABLE for optional ECO load-switching capability.
LED Indicators
A Mains AC Input (Green)
Illuminates to indicate mains AC cord/inlet (6) is live.
B Controllable Receptacle Group Output (Green)
Illuminates to indicate Controllable Receptacle Group (2) is live.
C Master Output Receptacle Output (Green)
Illuminates to indicate Master Output Receptacle (1) is live.
D Bypass Mode LED (Yellow)
Illuminates when the Bypass Switch is in the BYPASS position.
2. Product Overview

Termékspecifikációk

Márka: Tripp Lite
Kategória: nincs kategorizálva
Modell: PDUBHV101U

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite PDUBHV101U, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Tripp Lite

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva