Használati útmutató Tripp Lite N252A-024-HUSHK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite N252A-024-HUSHK (29 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/29
Installation Guide
24-Port Cat6a Dual IDC STP
High-Density 0.5U Patch Panel
Model: N252A-024-HUSHK
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
Español 9 • Français 16 • Русский 23
2
Installation
1 Prepare Cables.
S/FTP Cable
F/FTP Cable
5 cm
5 cm
Remove approximately
5 cm of cable sheath.
Roll the exposed braid back
along the cable sheath.
Remove approximately
5 cm of cable sheath.
Roll the exposed foil back
along the cable sheath.
Where a foil screen is present,
remove approximately 2 mm of
the exposed length.
Where a foil screen is present,
remove approximately 2 mm of
the exposed length.
Separate the
conductors.
Wrap the drain wire at least
twice around the foil. Separate
the conductors.
50 mm
50 mm
2 mm
2 mm
Drain
Wire
3
Installation
2 Seat each wire into the IDC slots according to
the color scheme map. Punch down with a proper
impact tool.
OR

Termékspecifikációk

Márka: Tripp Lite
Kategória: nincs kategorizálva
Modell: N252A-024-HUSHK

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite N252A-024-HUSHK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Tripp Lite

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva