Használati útmutató Tripp Lite ENBRKTCVR

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite ENBRKTCVR (16 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/16
1
Installation Guide
Wireless Access Point Right-Angle
Wall Bracket with Cover
Model: ENBRKTCVR
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners.
Español 5 • Français 9 • 13Русский
2
Components List
Installation
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or
faulty, visit www.tripplite.com/support for service.
(x1) (x1) (x1) (x1) (x1)(x4) (x2)
1. Mount Bracket to Wall
Mark the exact location of the
mounting holes
Attach the
bracket onto
the wall
Drill pilot holes
Find a wood stud
location for mounting
the wall mount
(Mounting Hardware
Not Included)
3
Installation
IMPORTANT!
Attach all data and power cables to the access point prior to attaching to the mount.
Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws (not included) to secure the
mount in place.
Make sure that mounting screws are anchored into the center of the studs. Use of a studnder is highly recommended.
If there is no stud at the mounting location, it is recommended that you use four anchors to secure the mount in place. Due to the
weight of the mount, plastic expansion wall anchors are not recommended for drywall installations. Suitable anchors include: threaded
drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors (a.k.a. molly bolts) or toggle bolts.
If placing the mount over a telecommunications receptacle, remove the wall plate, then fasten the mount to the wall. Once secured,
fasten the wall plate back over the receptacle.
If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be mounted inside the unit.
Use an adhesive-backed surface mount box.
2. Run Data and Power Cable (If Required) Through the Mount’s Rear Cutout or
Side Conduit Cutouts
3. Using the Provided Screws, Attach the Access Point to the Mount
3a. Cisco Low-Profile Bracket
(AIR-AP-BRACKET-1)* Installation
3b. Cisco Universal Bracket
(AIR-AP-BRACKET-2)* Installation
AIR-AP-BRACKET-2
Security Tab Access Point
Security Tab
Zip Tie
(Included)
* Cisco brackets not included.

Termékspecifikációk

Márka: Tripp Lite
Kategória: nincs kategorizálva
Modell: ENBRKTCVR

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite ENBRKTCVR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Tripp Lite

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025