Használati útmutató TRENDnet TC-K25C6

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TRENDnet TC-K25C6 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
TC-K25C6/TC-K50C6
Cat6 Keystone Jack
Quick Installation Guide
T568B Pinout
1. White Orange
2. Orange
3. White Green
6. Blue
4. White Blue
5. Green
7. White Brown
8. Brown
5. Feed the included cable tie through the
cable fixture hole and tighten to secure
the termination cap and keystone jack
together.
1. Strip approximately 30mm (1.2 in.) of
jacket from the twisted pair cable.
Unloading the cable
1. Cut the cable tie.
2. Using a flathead screwdriver, gently
pry each side of the termination cap
until released.
4. Press the termination cap down until
flush with the keystone jack. Ensure each
wire is firmly anchored in each slot.
3. Clip the termination cap onto the
keystone jack hinge.
2. Insert the cable into the termination cap
and fan out all four twisted pairs. Using the
T568A or T568B color labeling, position
each wire appropriately into the color
labeled slots. Cut excess wires.
Cable Fixture Hole
Cable Tie
Cable Tie
Cut off cable tie

Termékspecifikációk

Márka: TRENDnet
Kategória: nincs kategorizálva
Modell: TC-K25C6

Szüksége van segítségre?

Ha segítségre van szüksége TRENDnet TC-K25C6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva TRENDnet

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva