Használati útmutató TP-Link Omada Pro S4500-8GP

TP-Link kapcsoló Omada Pro S4500-8GP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TP-Link Omada Pro S4500-8GP (2 oldal) a kapcsoló kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
© 2023 TP-Link 7106510430 REV1.0.0
Omada Pro Gigabit Smart Switch
1. To access the management page of the switch, open a browser and type
the switch’s IP address in the address eld, then press the Enter key.
If the switch obtains IP address from the DHCP server (typically a router), nd
the switch’s IP address on the DHCP server.
If not, use the default IP address to launch the switch’s 192.168.0.1
management page.
Note: Make sure the switch and computer are in the same subnet.
2. admin Enter for both the username and password in the lower case letters
to log in. The rst time you log in, change the password to better protect
your network and devices.
3. After a successful login, the main page will appear. You can click the menus
on the top side and left side to congure the corresponding functions.
Installation Guide
Conguration
LED Explanation
For the detailed congurations, refer to the User Guide and CLI Guide. The
guides can be found on the download center of our ocial website:
https://www.tp-link.com/support/download/.
Method 1: Standalone Mode
Switch PC
In Standalone Mode, use a computer to congure and manage the switch.
The switch supports two conguration methods:
Standalone Mode: Congure and manage the switch singly.
Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our
ocial website: https://www.tp-link.com/support/download/.
Note:
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.
3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as
a result of client limitations and environmental factors.
For simplicity, we will take S4500-8GP2F for example throughout the Guide.
Note:
1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which
complies with LPS or PS2 standard and 802.3af/at standard.
2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will
supply power instead.
Ethernet Ports (1–8)
AC Power Cord
DC Power Adapter
Internet
PC
PSE
LED S Explanationtatus
P erow
On Power on
S temys
F F Systlashing lashing: em running normally
Link/Act
(port 1–8)
On (Green) Running at 1000 Mbps
On (Yell w) Running at 10/100 Mbpso
F Transmitting/receiving datalashing
No connected device
SPF1/SFP2
(For S4500-
8GP2F)
On (Green) Running at 1000 Mbps
On (Yell w) Running at 100 Mbpso
F Transmitting/receiving datalashing
No connected device
PoE Status
(For Port 1-4 of
S4500-8GP/Port
1-8 of S4500-
8GP2F)
On Providing PoE power
Flashing
Current-ov rt-cir t/Connected erload/Sho cui
to a non-standard PD/Power exceeded the
Not providing PoE Power
PoE MAX
(For S4500-8GP/
S4500-8GP2F)
On Remaining power supply ≤ 7W
Flashing Remaining pow k for er supply eeps ≤ 7 W
mor tese than 2 minu
Remaining power supply
> 7W
Connection for PoE Switch
Ethernet Ports (1–8)
PC IP Camera AP IP Phone
PoE Devices
DC Power Adapter
AC Power Cord
Internet
SFP Slots
Connection for Non-PoE Switch
For simplicity, we will take S4500-8G for example throughout the Guide.
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/
EU declaration of conformity
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Place the device with its bottom surface downward.
The plug on the power supply cord is used as the disconnect device, the socket-outlet
shall be easily accessible.
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and
Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at
https://www.tp-link.com/support/ukca/
UK declaration of conformity
Option 2: Controller Mode Choose a type of controller:
Type 2: Omada Pro Cloud-Based ControllerType 1: Omada Pro Software Controller
If you want to use the software controller, get a PC with Windows or Linux OS,
contact the sales staff to get the installation package of Omada Pro Software
Controller, then install and launch it.
To manage your devices, the software controller needs to continually run on
your computer. Licenses need to be purchased additionally.
1. Make sure that Cloud Access is enabled on your controller and your
controller has been bound with your TP-Link ID.
2. Launch a web browser and enter https://omada.tplinkcloud.com in the
address bar. Log in with your TP-Link ID. A list of controllers that have been
bound with your TP-Link ID will appear. Then you can launch the controller
to adopt and manage devices.
Local Management
1. Launch the software controller on your PC. After the initiation process, the
controller automatically opens its web page. If not, click Launch a Browser
to Manage the Network.
2. On the controller’s web page, follow the wizard to complete the quick
setup.
Note: The controller must have network access to your devices in order to find, adopt, and
manage them.
3. After the quick setup, the login page appears. Enter the username and
password you created and click . Then you can adopt and manage Log in
devices.
Remote Management
Note: Before you start, make sure that both your controller and PC can access the
internet.
1. Contact the sales staff to grant the Omada Pro Cloud-Based Controller
permission.
2. Launch a web browser and enter https://omada.tplinkcloud.com in the
address bar. Log in with your TP-Link ID.
3. + Add ControllerClick and choose to add an Cloud-Based Controller
Omada Pro controller. Then you can launch the controller to adopt and
manage devices.
Omada Pro Cloud-Based Controller is a good alternative without the need to
install the software controller on a PC.
Licenses need to be purchased additionally.
Switch
Router
AP
Clients
AP APAP
Omada Cloud
Switch
Router
AP
Clients
Controller
Omada Pro Software Controller
running on the Host PC
AP AP
* Management via Omada App
1. Download and install the TP-Link Omada app from App Store or
Google Play.
After configuring a software controller/cloud-based controller via the
web, you can use the Omada app to manage your controller.
2. Make sure that Cloud Access is enabled on your controller and your
controller has been bound with your TP-Link ID.
or
Scan for Omada Omada
3. Launch the Omada app and log in with your TP-Link ID. Then go to
Cloud Access. A list of controllers that have been bound with your
TP-Link ID will appear. Then you can launch the controller to adopt
and manage devices.
Note: For the cloud-based controller, skip step 2.

Termékspecifikációk

Márka: TP-Link
Kategória: kapcsoló
Modell: Omada Pro S4500-8GP

Szüksége van segítségre?

Ha segítségre van szüksége TP-Link Omada Pro S4500-8GP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kapcsoló TP-Link

TP-Link

TP-Link Omada ES210GMP Útmutató

3 Január 2025
TP-Link

TP-Link TL-SG605 Útmutató

10 December 2024
TP-Link

TP-Link Festa FS328G Útmutató

4 Október 2024
TP-Link

TP-Link TL-SG1048 Útmutató

11 Szeptember 2024
TP-Link

TP-Link JetStream Desktop TL-SF1016 Útmutató

11 Szeptember 2024
TP-Link

TP-Link TL-SG105S Útmutató

11 Szeptember 2024
TP-Link

TP-Link JetStream L2 Managed TL-SG3424 Útmutató

11 Szeptember 2024
TP-Link

TP-Link TL-SG1016S Útmutató

3 Szeptember 2024
TP-Link

TP-Link Festa FS352GP Útmutató

1 Szeptember 2024
TP-Link

TP-Link Festa FS310GP Útmutató

31 Augusztus 2024

Útmutatók kapcsoló

Legújabb útmutatók kapcsoló

Tork

Tork SS700ZA Útmutató

9 Április 2025
Cudy

Cudy FS1024 Útmutató

9 Április 2025
Lancom

Lancom GS-2412 Útmutató

5 Április 2025
Lancom

Lancom GS-2412P Útmutató

5 Április 2025
Lancom

Lancom GS-2426 Útmutató

5 Április 2025
Lancom

Lancom GS-2426P Útmutató

5 Április 2025
Hager

Hager ARF970D Útmutató

3 Április 2025
Hager

Hager ARF920D Útmutató

3 Április 2025
Fantini Cosmi

Fantini Cosmi B12BN Útmutató

2 Április 2025
Fantini Cosmi

Fantini Cosmi B12DN Útmutató

2 Április 2025