Használati útmutató Texas Instruments SN74F573N

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Texas Instruments SN74F573N (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5



SDFS011A − MARCH 1987 − REVISED OCTOBER 1993
Copyright 1993, Texas Instruments Incorporated
2−1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
Eight Latches in a Single Package
3-State Bus-Driving True Outputs
Full Parallel Access for Loading
Buered Control Inputs
Package Options Include Plastic
Small-Outline Packages, Ceramic Chip
Carriers, and Standard Plastic and Ceramic
300-mil DIPs
description
These 8-bit latches feature 3-state outputs
designed specifically for driving highly capacitive
or relatively low-impedance loads. They are
particularly suitable for implementing buffer
registers, I/O ports, bidirectional bus drivers, and
working registers.
The eight latches of the F573 are transparent
D-type latches. While the latch enable (LE) input
is high, the Q outputs follow the data (D) inputs.
When the latch enable is taken low, the Q outputs
are latched at the logic levels set up at the D
inputs.
A buffered output enable (OE) input can be used
to place the eight outputs in either a normal logic
state (high or low logic levels) or a high-
impedance state. In the high-impedance state, the
outputs neither load nor drive the bus lines
significantly. The high-impedance state and
increased drive provide the capability to drive bus
lines without need for interface or pullup
components.
The output enable (OE) input does not aect the internal operations of the latches. Old data can be retained
or new data can be entered while the outputs are in the high-impedance state.
The SN54F573 is characterized for operation over the full military temperature range of −55° °C to 125 C. The
SN74F573 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
(each latch)
INPUTS
OUTPUT
OE LE D
OUTPUT
Q
L H H H
L H L L
L L X Q0
H X X Z
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
OE
1D
2D
3D
4D
5D
6D
7D
8D
GND
VCC
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
LE
SN54F573 . . . J PACKAGE
SN74F573 . . . DW OR N PACKAGE
(TOP VIEW)
3 2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
2Q
3Q
4Q
5Q
6Q
3D
4D
5D
6D
7D
2D
1D
OE
8Q
7Q 1Q
8D
G
ND
LE
V
CC
SN54F573 . . . FK PACKAGE
(TOP VIEW)
  !  " #$%! "  &$'(#! )!%*
)$#!" # ! "&%##!" &% !+% !%"  %," "!$%!"
"!)) -!.* )$#! &#%""/ )%" ! %#%""(. #($)%
!%"!/  (( &%!%"*



SDFS011A − MARCH 1987 − REVISED OCTOBER 1993
2−2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443
HOUSTON, TEXAS 77251−1443
logic symbollogic diagram (positive logic)
OE
1D
2
1D 3
2D 4
3D
5
4D 6
5D
C1
11
LE
1Q
19
2Q
18
3Q
17
4Q
16
5Q
15
6Q
14
7Q
13
8Q
12
7
6D
8
7D 9
8D
EN
1
OE
LE
1D
1Q
1
11
2
19
To Seven Other Channels
C1
1D
This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC 0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) 1.2 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current range 30 mA to 5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage range applied to any output in the disabled or power-off state 0.5 V to 5.5 V. . . . . . . . . . . . . . . . . . .
Voltage range applied to any output in the high state 0.5 V to VCC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Current into any output in the low state: SN54F573 40 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN74F573 48 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range: SN54F573 55° °C to 125 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN74F573 0° °C to 70 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range 65° °C to 150 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditionsis not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed.
recommended operating conditions
SN54F573 SN74F573
UNIT
MIN NOM MAX MIN NOM MAX
UNIT
VCC Supply voltage 4.5 5 5.5 4.5 5 5.5 V
VIH High-level input voltage 2 2 V
VIL Low-level input voltage 0.8 0.8 V
IIK Input clamp current 18 18 mA
IOH High-level output current 3 3 mA
IOL Low-level output current 20 24 mA
TAOperating free-air temperature 55 125 0 70 C°



SDFS011A − MARCH 1987 − REVISED OCTOBER 1993
2−3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
SN54F573 SN74F573
UNIT
PARAMETER
TEST CONDITIONS
MIN TYPMAX MIN TYPMAX
UNIT
VIK VCC = 4.5 V, II =18 mA 1.2 1.2 V
V 4 5 V
IOH = − 1 mA 2.5 3.4 2.5 3.4
VOH
VCC = 4.5 V IOH = − 3 mA 2.4 3.3 2.4 3.3 V
VCC = 4.75 V, IOH = − 1 mA to −3 mA 2.7
V
V 4 5 V
IOL = 20 mA 0.3 0.5
V
VOL VCC = 4.5 V IOL = 24 mA 0.35 0.5 V
IOZH VCC = 5.5 V, V
O = 2.7 V 50 50 Aµ
IOZL VCC = 5.5 V, V
O = 0.5 V 50 50 µA
IIVCC = 5.5 V, V
I = 7 V 0.1 0.1 mA
IIH VCC = 5.5 V, V
I = 2.7 V 20 20 Aµ
IIL VCC = 5.5 V, V
I = 0.5 V 0.6 0.6 mA
IOSVCC = 5.5 V, V
O = 0 60 60−150 −150 mA
ICCZ VCC = 5.5 V, See Note 2 38 55 38 55 mA
All typical values are at V
CC = 5 V, T
A = 25°C.
Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
NOTE 2: ICCZ is measured with OE at 4.5 V and all other inputs grounded.
timing requirements over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
VCC = 5 V,
TA = 25°C
UNIT
F573
UNIT
MIN MAX MIN MAX MIN MAX
twPulse duration, LE high 6 6 6 ns
tsu Setup time, data before LE2 2 2 ns
thHold time, data after LE3 3 3 ns
switching characteristics (see Note 3)
PARAMETER FROM
(INPUT)
TO
(OUTPUT)
VCC = 5 V,
CL = 50 pF,
RL = 500 ,
TA = 25°C
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
RL = 500,
TA = MIN to MAX§UNIT
(INPUT)
(OUTPUT)
F573 SN54F573 SN74F573
MIN TYP MAX MIN MAX MIN MAX
tPLH
D
Q
2 4.9 7 1.5 9 2.2 8
ns
tPHL
D
Q
1.2 3.3 5 1 8 1.2 6 ns
tPLH
LE
Q
4.2 8.6 11.5 3.7 13.5 4.2 13
ns
tPHL
LE
Q
2.2 4.8 7 1.5 9 2.2 8 ns
tPZH
OE
Q
1.2 4.6 1 13 1.2 1211
ns
tPZL
OE
Q
1.2 5.2 7.5 1 10 1.2 8.5 ns
tPHZ
OE
Q
1.2 4.1 6.5 1 8.5 1.2 7.5
ns
tPLZ
OE
Q
1.2 3.4 6 1 7 1.2 6
ns
§For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 3: Load circuits and waveforms are shown in Section 1.

Termékspecifikációk

Márka: Texas Instruments
Kategória: nincs kategorizálva
Modell: SN74F573N

Szüksége van segítségre?

Ha segítségre van szüksége Texas Instruments SN74F573N, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Texas Instruments

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva