Használati útmutató Techno Line WS-7018S

Techno Line Időjárás állomás WS-7018S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Techno Line WS-7018S (25 oldal) a Időjárás állomás kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/25

WIRELESS 433 MHz WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this Weather Station with wireless 433MHz transmission of outdoor temperature

and humidity and display of indoor temperature and humidity. It is further featuring a DCF-77 radio controlled clock

with date display and two alarms. With eight easy to use function keys, this innovative product is ideal for use in the

home or office.

FEATURES:

The Weather Station

Detachable stand

Function Keys

Battery cover

LCD Display

Hanging Hole

• DCF-77 Radio controlled time with manual setting options

• Time reception ON/OFF

• 12/24 hour display

• Hour and minute display, seconds indicated by flashing dot

• Time zone option ±12hours

• Features 2 alarms with snooze function

• Snooze setting

• Date and month / weekday and date calendar display selectable

• Weather forecasting with 3 weather icons and weather tendency indicator

• Weather forecasting icon sensitivity setting

• Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

• Indoor and outdoor temperature display with MIN/MAX recording

• Indoor and outdoor humidity reading displayed as RH% with MIN/MAX recordings

• All MIN/MAX temperature recordings show date and time received

• All MIN/MAX recordings can be reset

• Indoor comfort level indicator - happy or sad face icons

• Can take up to three outdoor transmitters

• LCD contrast setting

• Low battery indicator

• Wall mounting or table standing

The Thermo-Hygro Outdoor Transmitter

• Remote transmission of outdoor temperature and humidity to

weather station by 433 MHz signals

• LCD showing outdoor temperature and humidity

• Wall mounting case

SETTING UP:

1. First, insert the batteries into the Weather station (see “How to install and replace batteries in the

Weather station” below). Once the batteries are in place, all segments of the LCD will light up briefly and a

short signal tone will sound. Following some test data display, the indoor temperature and humidity, the time

as 0:00 the date as 1.1. and the weather icons sun and clouds will be displayed. If the indoor temperature

and humidity are not displayed after 30 seconds, remove the batteries and wait for at least 10 seconds

before reinserting them. Once the indoor data is displayed proceed to step 2.

2. Within 3 minutes of activating the Weather station, place the batteries into the transmitter (see “How to

install and replace batteries in the Thermo-Hygro outdoor transmitter“ below).

3. After inserting the batteries into the transmitter, the Weather station will start receiving data from the

transmitter. The outdoor temperature and humidity should then be displayed on the Weather station. If this

does not happen after 15 minutes, the batteries will need to be removed from both units and reset from step

4. The Weather station can take up to 3 remote transmitters. If you have purchased additional transmitters,

follow step 2 for all extra transmitters. However, ensure that you leave 10 seconds in between the reception

of the last transmitter and the set-up of the following transmitter. The Weather station will number the

transmitters in the order of set-up, i.e. the first transmitter will have the temperature displayed with the

number 1 against it and so on.

5. Before all the transmitters are set up, there is a testing period, during which the display switches quickly

between all the received transmitters at random, according to which random transmission it receives.

Pressing any key will stop this process. The process also stops automatically if up to 3 transmitters are

received or no keys are pressed for a few minutes.

6. Once the remote temperature and humidity have been received and displayed on the Weather station, the

DCF-77 time code reception is automatically started. This takes typically between 3-5 minutes in good

conditions. This time period is an excellent opportunity to locate the transmitter(s) in suitable location(s)

outdoors. In order to ensure sufficient 433 MHz transmission however, this should under good conditions be

Termékspecifikációk

Márka:	Techno Line
Kategória:	Időjárás állomás
Modell:	WS-7018S

Szüksége van segítségre?

Ha segítségre van szüksége Techno Line WS-7018S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Időjárás állomás Techno Line

Techno Line WS 9632 Útmutató

5 Január 2025

Techno Line WS 9620 Útmutató

28 December 2024

Techno Line WS 9310 Útmutató

28 December 2024

Techno Line WS 9135 Útmutató

28 December 2024

Techno Line WS 6870 Útmutató

28 December 2024

Techno Line WS 9450 Útmutató

28 December 2024

Techno Line WS 9257 Útmutató

28 December 2024

Techno Line WS 9125 Útmutató

28 December 2024

Techno Line WS 9060 Útmutató

28 December 2024

Techno Line MA 10920 Útmutató

28 December 2024

Útmutatók Időjárás állomás

Legújabb útmutatók Időjárás állomás

TFA 35.1044.55.IT Útmutató

31 Március 2025

Bresser Translucidus NV Útmutató

27 Március 2025

Bresser ClimaTemp TB Útmutató

27 Március 2025

Ventus K0382 Útmutató

14 Január 2025

Alecto WS-1200 Útmutató

13 Január 2025

TFA 20.1082.17 Útmutató

13 Január 2025

Oregon Scientific BAR310HG Útmutató

12 Január 2025

Oregon Scientific BAR 898 Útmutató

12 Január 2025

Auriol AHFL 433 B2 Útmutató

12 Január 2025

Davis Weatherlink Touch Console Útmutató

11 Január 2025