Használati útmutató Tannoy VTH TOP HAT

Tannoy hangszóró VTH TOP HAT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tannoy VTH TOP HAT (1 oldal) a hangszóró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
VTH TOP HAT
Pole Mount Top Hat Accessory for VX Loudspeakers
WARNING: As the legal requirements for ying vary from country to country, please consult your local safety standards o ce before installing any product.
We also recommend that you thoroughly check any laws and bylaws prior to installation. For more detailed information on rigging hardware and safety
procedures, please consult the full VX Series Quick Start Guide.
Installation:
1. Remove the 4 screws from the bottom of the VX speaker that hold the blanking plate in place.
2. Remove the blanking plate, then place the Top Hat  xture onto the speaker so that the pole receptacle goes into the speaker box.
3. Align the screw holes over the speaker and replace the original 4 screws to complete the installation.
2.0mm [0.08inch]
76mm [3.0inch]
4-Ø7.5mm [
Ø
0.30inch]
4.4mm [0.17inch]
Ø82mm [
Ø
3.2inch]
Ø118mm [Ø4.6inch]

Termékspecifikációk

Márka: Tannoy
Kategória: hangszóró
Modell: VTH TOP HAT

Szüksége van segítségre?

Ha segítségre van szüksége Tannoy VTH TOP HAT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró Tannoy

Útmutatók hangszóró

Legújabb útmutatók hangszóró