Használati útmutató Tanaka TMC-200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tanaka TMC-200 (5 oldal) a Grastrimmer kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
OwnerOwner
OwnerOwner
Owners Mans Man
s Mans Man
s Manualual
ualual
ual
Model Numbers:
TMC-200TMC-200
TMC-200TMC-200TMC-200
MINI-CULMINI-CUL
MINI-CULMINI-CULMINI-CULTIVTIV
TIVTIVTIVAA
AAATT
TTTOROR
OROROR
Date 09-07-01
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4th Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 Fax: (253) 333-1212
tanaka-usa.com custsvc@tanaka-ism.com
TMC-200
tanaka-usa.com 1 custsvc@tanaka-ism.com
Owner’s Manual
Owner’s Manual
Owner’s Manual
Owner’s ManualOwner’s Manual
TMC-200
,
MINI-CULTIVATOR
This mini-cultivator has been developed as an attachment for Tanaka brush cutters. With the application of this unit your brush cutter
can be converted into compact and handy tilling machine. Installation is simple. Please read this manual for installation and starting
job.
I. ASSEMBLING PROCEDURES
NOTE: Prepare two 10mm wrenches for assembling.
1. First, remove gear case assembly from your brush cutter by removing pipe tightening screws (1) and pipe lock
screw (2), then remove safety cover of brush cutter. (Fig. 1)
2. Install safety cover (3) and the collar (4) of Mini-cultivator by insetting onto shaft pipe (5) and fix it temporarily
keeping the model name on the cover upright.(Fig.2)
3. Install Mini-cultivator unit onto the pipe end where gear case has been
removed from by aligning drive shaft (6) and squared or splined hole in gear
case. If drive shift does not fit into the hole, try to turn the whole unit slightly
right and left. (Fig. 4)
4. Once the unit is completely inserted, meet the locking hole of pipe and that of
gear case, tighten the lock screw (7) in the hole and pipe tightening screws
(8) in order. (Fig. 4)
NOTE: After installation, you can not turn tines by hand due to its worm gear
mechanism.
5. Finally secure the safety cover a minimum of 2 in. from the gear case.
NOTE: If your unit is model TBC-265 which has larger sized shaft pipe, remove the
bracket collar (9) and gear case collar B (10) and install. (Fig. 3)
II. OPERATING PROCEDURES
1. As to general safety operation and power head operation su ff, etc, please refer to the ch as engine starting/shut o
owners manual provided with your Tanaka brush cutter.
2. How to till:
a. For standard tilling. Walk forward as pulling and pushing the unit little
by little like using a vacuum cleaner. (Fig. 5) When you want to erase
your foot-prints, pull the unit backwards. (Fig. 6)
tanaka-usa.com 2 custsvc@tanaka-ism.com
Owner’s Manual
Owner’s Manual
Owner’s Manual
Owner’s ManualOwner’s Manual
TMC-200
,
MINI-CULTIVATOR
b. For shallow tilling, move the unit quickly over soil surface. (Fig. 7) For deeper tilling, hold the unit over
the same area with the gentle back and forth motion. (Fig. 8)
NOTE:
a. Working throttle position depends on your size of engine and tilling
depth but half way open is standard. If tines rotate too fast, the unit
is likely to hop.
b. Do not work in rocky area. If the tines jammed with rock or hard
soil, or tangled around with long grasses, shut off engine first, then
remove the obstruction. (Fig. 9)
c. Do not use the unit in water or rooted, vine area. (Fig. 10 & 11)
d. The tines are pre-assembled at factory, when reassembling them, be aware of their direction.
e. Do not touch the gear case with bare hand right after operation. It gets hot.
f. Supply proper amount of lithium-based grease, such as Shell Aluvania grease R2, Shell Aluvania EP
grease 2, Mobile-Mobilux EP2 or equivalent after every 25 hours of use. (Fig. 12)
g. When reassembling, be sure to use 40grams of molybdenum added lithium-based grease or Shell
Retinax AM or equivalent.

Termékspecifikációk

Márka: Tanaka
Kategória: Grastrimmer
Modell: TMC-200

Szüksége van segítségre?

Ha segítségre van szüksége Tanaka TMC-200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Grastrimmer Tanaka

Tanaka

Tanaka TBC-260PFL Útmutató

22 Augusztus 2024
Tanaka

Tanaka TCG22EABSLP Útmutató

22 Augusztus 2024
Tanaka

Tanaka TBC-240SFS Útmutató

22 Augusztus 2024
Tanaka

Tanaka TBC-240PFS Útmutató

22 Augusztus 2024
Tanaka

Tanaka TCG22EADSLP Útmutató

22 Augusztus 2024
Tanaka

Tanaka TCG22EASSLP Útmutató

22 Augusztus 2024
Tanaka

Tanaka TBC-280PF Útmutató

22 Augusztus 2024
Tanaka

Tanaka TBC-240PF Útmutató

22 Augusztus 2024
Tanaka

Tanaka TCG22EAP2SL Útmutató

22 Augusztus 2024
Tanaka

Tanaka TBC-255PF Útmutató

22 Augusztus 2024

Útmutatók Grastrimmer

Legújabb útmutatók Grastrimmer

Toro

Toro 51464 Útmutató

8 Április 2025
Toro

Toro 51930 Útmutató

8 Április 2025
Makita

Makita BCX2500 Útmutató

1 Április 2025
Bavaria

Bavaria BBC 43 Útmutató

30 Március 2025
Makita

Makita DST300 Útmutató

29 Március 2025
Makita

Makita BCM4300 Útmutató

28 Március 2025
Makita

Makita BCM2600 Útmutató

28 Március 2025
Makita

Makita BCM2310 Útmutató

28 Március 2025