Használati útmutató Synco Vlogger Kit 2

Synco mikrofon Vlogger Kit 2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Synco Vlogger Kit 2 (2 oldal) a mikrofon kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Insert the microphone body into the
shock mount. Make sure it is secure and
well-balanced.
① Power & Adjustment Dial
Turn the dial to the right to turn the light on
and left to turn the light out.
When the light is on, rotate the dial to adjust
light e󽗈ect.
② Battery Cover
Please place two AA batteries inside the light
before use, and remove the batteries for
storage.
③ Cold Shoe Mount
④ 1/4” Screw Hole
⑤ Cold Shoe
Microphone Usage
Video Light Instructions
The phone holder provides one cold shoe mount and two 1/4” threads for
attaching microphone or video light, and tripod.
1. Attach the phone holder to the tripod via the 1/4” threads.
2. Unscrew the knob beside the tripod to adjust the 󽗉lming angle.
3. Fasten the knob to 󽗉x the phone holder.
4. Place the smartphone into the clamp and adjust it.
5. Install the video light on the phone holder via the cold shoe mount.
6. Fix the microphone to the cold shoe mount on the video light.
7. Connect the microphone with your phone via the 3.5mm TRRS phone cable.
Kit Installation
1/4” threads
cold shoe mount
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or the
code on the product or warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈, battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact
a local agent for assistance, or you can always contact SYNCO’s customer
service through email at
support@syncoaudio.com.
Please retain your sales receipt and warranty certi󽗉cate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts
cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to limited warranty service. 12-month
Warranty
Transducer
Polar Pattern
Frequency Response
Signal/Noise
Max. SPL
Sensitivity
Power Requirement
Connector
Dimensions
Net Weight
Color Temperature
Power
Power Requirement
Material
Color
Dimension
Clamp Range
Net Weight
Condenser
Cardioid
100Hz-20KHz/ ±3dB
>60dB
130dB@1KHz, 1%THD
-35dB re 1 Volt/pasal(18.00mV@94dB SPL ) +1/-2dB@1KHz
Plug-in Power
3.5mm TRS/3.5mm TRRS
Φ21.5x 72mm
35g
5000K
5.5W
2* AA Batteries
Plastic
Black
7.5 x 3.5 x 2.5cm
5.5-8cm
35g
Microphone
Video Light
Phone Holder
Speci󽗉cations WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us
via Email:support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
The warranty period begins on the date of purchase of brand new, unused
products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to material
defection or technological problem, the defective product or defective part will
be repaired or replaced without charge (service and materials fee).

Termékspecifikációk

Márka: Synco
Kategória: mikrofon
Modell: Vlogger Kit 2

Szüksége van segítségre?

Ha segítségre van szüksége Synco Vlogger Kit 2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mikrofon Synco

Synco

Synco G2A1 Útmutató

2 Április 2025
Synco

Synco PX Útmutató

2 Április 2025
Synco

Synco MC3 LITE Útmutató

2 Április 2025
Synco

Synco G2A2 Útmutató

2 Április 2025
Synco

Synco G1A1 Útmutató

2 Április 2025
Synco

Synco G1 Pro Útmutató

2 Április 2025
Synco

Synco G2 Max Útmutató

2 Április 2025
Synco

Synco LAV-S6P Útmutató

29 Március 2025
Synco

Synco MA30 Útmutató

27 Március 2025
Synco

Synco P2S Útmutató

27 Március 2025

Útmutatók mikrofon

Legújabb útmutatók mikrofon