Használati útmutató Supermicro SuperServer 5019C-MR

Supermicro szerver SuperServer 5019C-MR

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Supermicro SuperServer 5019C-MR (16 oldal) a szerver kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
Information for Lot 9 of d )ErP (Eco esign
This addresses Ecodesign addendum European Union (EU) requirements for servers and storage products.
All data and ratings within this addendum are in reference only to the in thSupermicro product(s) e
manual. the The below information conforms to requirements laid down in Annex II of Commission
Regulation . 2019/424
3(1)(a): See Section 1.1 of the system manual for the product type.
3(1)(b): e See the title page and preface of th system manual for trademark and the
manufacturer’s address.
3(1)(c): See the title page of the system manual for product model number(s).
3(1)(d): See the serial number on the physical system to determine the year . of manufacture
3(1)(e-j ): PSU Efficiency V ) (f and Power Factor alue (Table rom 80 Plus report)
PSU Model #: PWS- - 407 1R
Watts: 400W
PSU E fficiency
P Fower actor
% of R Lated oad
% % % %10 20 50 100
50 %
Single -Output (AC DC)
85.64%
92.05%
94.43%
93.17%
0.98
System (EUT) E P fficiency in I Sdle tate ower (Table)
Representative
Configurations
Measured Idle State
Power (W)
Calculated Idle Power Allowance
(W)
High-End Performance
Configuration
68.4
214.55
Typical Configuration
N/A
N/A
Low-End Performance
Configuration
45.2
180.33
System E(EUT) fficiency in A Sctive tate P ower (Table)
Representative
Configurations
E Sfficiency core
Minimum A S ctive tate Efficiency
High-End Performance
Configuration
14.4
Typical Configuration
N/A
9
Low-End Performance
Configuration
13.7
3(1)( ): k is . The operating condition class A2
Dry bulb temp °C
Humidity range, non condensing-
Operating
condition
class
Allowable
range
Recom
mended
range
Allowable range
Recommended range
Max dew
point (°C)
Maximum
rate of
change
(°
C/hr)
A1
15 32-
18 27-
–
12 and °C P Dew oint (DP)
8 % relative humidity (RH) to
17 ° and 80 C DP % RH
–
9 °C DP to
15 °C and DP
60 % RH
17
5/20
A2
10 35-
18 27-
–
12 and °C DP 8 % RH to
21 and 80 °C DP % RH
Same as A1
21
5/20
A3
5-40
18 27-
–
12 and °C DP 8 % RH to
24 and 85 °C DP % RH
Same as A1
24
5/20
A4
5-45
18 27-
–
12 and °C DP 8 % RH to
24 and 90 °C DP % RH
Same as A1
24
5/20
3(1)( ): l The idle state power at the higher boundary temperature of the operating conditions
class is W. 80.71
3(1)( ): m The active state efficiency and performance a minimum of is 13.7.
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.
Any user may access and download this y through following link: utilit
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure
_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB flash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and model
informatio n.
3(1)( ): o List of recommended combinations of blade servers with chassis: N/A.
3(1)(p): List of all current SKUs within this product family: N/A.
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of eodymium in the HDD is n 0.0 if manufactured by Western
Digital, and is between 5- 25 grams if manufactured by Seagate.
3(3)(b): Please see the disassembly instructions on the next page.

Termékspecifikációk

Márka: Supermicro
Kategória: szerver
Modell: SuperServer 5019C-MR

Szüksége van segítségre?

Ha segítségre van szüksége Supermicro SuperServer 5019C-MR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók szerver Supermicro

Supermicro

Supermicro SBA-4119S-T2N Útmutató

12 Január 2025
Supermicro

Supermicro A+ Server 1024US-TNR Útmutató

12 Január 2025
Supermicro

Supermicro SuperServer 2028U-TNRT+ Útmutató

11 Január 2025
Supermicro

Supermicro SuperServer 2028TR-HTFR Útmutató

9 Január 2025
Supermicro

Supermicro SuperBlade SBI-4129P-C2N Útmutató

29 December 2024
Supermicro

Supermicro SuperServer F619P2-RC1 Útmutató

29 December 2024
Supermicro

Supermicro SuperServer E300-9A-4C Útmutató

29 December 2024
Supermicro

Supermicro SuperServer 5029AP-TN2 Útmutató

29 December 2024
Supermicro

Supermicro SuperServer 5038K-I-NF3 Útmutató

29 December 2024
Supermicro

Supermicro SuperServer 5019A-FTN10P Útmutató

29 December 2024

Útmutatók szerver

Legújabb útmutatók szerver

Seagate

Seagate DS215+ Útmutató

9 Április 2025
Ibm

Ibm PureFlex System x240 Útmutató

3 Április 2025
Asus

Asus Z11PR-D16 Útmutató

2 Április 2025
Teradek

Teradek Cube 655 Útmutató

29 Március 2025
Teradek

Teradek Cube 505 Útmutató

29 Március 2025
Teradek

Teradek VidiU Pro Útmutató

29 Március 2025
Synology

Synology RS2414+ Útmutató

24 Március 2025
Synology

Synology DiskStation DS713+ Útmutató

24 Március 2025
MSI

MSI D3052 Útmutató

15 Január 2025
MSI

MSI G3101 Útmutató

15 Január 2025