Használati útmutató Stihl FS 450

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Stihl FS 450 (98 oldal) a Grastrimmer kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/98
Warning!
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Advertencia!
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede
causar lesiones graves o mortales.
STIH)
1FS 300, FS 350, FS 400, FS 450, FS 480
English / USA
BA_SE_081_009_01_07.fmPrinted on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2008
0458 255 8621 A. M0.5. B8. Rei. Printed in Germany
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Approved Combinations of
Cutting Tool, Deflector,
Stop and Harness ........................... 18
Mounting the Bike Handle .............. 20
Adjusting the Throttle Cable ........... 21
Mounting the Deflectors
and Limit Stop ................................. 22
Mounting the Cutting Tools ............. 23
Fuel ................................................ 26
Fueling ............................................ 27
Fitting the Harness ......................... 27
Balancing the Machine ................... 28
Starting / Stopping the Engine ........ 28
Operating Instructions .................... 30
Cleaning the Air Filter ..................... 31
Cleaning the Air Filter ..................... 31
Motor Management ........................ 32
Adjusting the Carburetor ................ 32
Winter Operation ............................ 33
Electric Handle Heating ................. 34
Checking the Spark Plug ................ 34
Engine Running Behavior .............. 35
Lubricating the Gearbox ................. 36
Replacing the Starter
Rope and Rewind Spring ............... 36
Storing the Machine ....................... 38
Sharpening
Metal Cutting Tools ......................... 39
Maintenance Chart ......................... 40
Parts and Controls ......................... 42
Specifications ................................. 44
Special Accessories ....................... 45
Maintenance and Repairs .............. 45
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 46
Trademarks .................................... 48
Allow only persons who understand this
manual to operate your clearing saw.
To receive maximum performance and
satisfaction from your STIHL brush-
cutter, it is important that you read and
understand the maintenance and safety
precautions, starting on page 3, before
using your clearing saw.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!Warning!
Because a clearing saw is a high-speed
cutting tool some special safety pre-
cautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury. Make sure
your unit is equipped with the proper
deflector, handle and harness for the
type of cutting attachment being used.
Always wear proper eye protection.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the appear-
ance of your clearing saw differs from
those described in this manual, please
contact your STIHL dealer for informa-
tion and assistance.
2
English / USA
FS 300, FS 350, FS 400, FS 450, FS 480
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
Guide to Using this Manual

Termékspecifikációk

Márka: Stihl
Kategória: Grastrimmer
Modell: FS 450

Szüksége van segítségre?

Ha segítségre van szüksége Stihl FS 450, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Grastrimmer Stihl

Stihl

Stihl FS 240 RC Útmutató

12 Január 2025
Stihl

Stihl FCA 80.0 Útmutató

12 Január 2025
Stihl

Stihl FS 490 C-M Útmutató

30 Szeptember 2024
Stihl

Stihl FixCut 5-2 Útmutató

20 Szeptember 2024
Stihl

Stihl AutoCut 5-2 Útmutató

19 Szeptember 2024
Stihl

Stihl AutoCut C 26-2 Útmutató

14 Szeptember 2024
Stihl

Stihl TrimCut 51-2 Útmutató

13 Szeptember 2024
Stihl

Stihl AutoCut C 3-2 Útmutató

10 Szeptember 2024
Stihl

Stihl FS 88 Útmutató

31 Augusztus 2024
Stihl

Stihl FSA 120.0 Útmutató

21 Augusztus 2024

Útmutatók Grastrimmer

Legújabb útmutatók Grastrimmer

Makita

Makita BCX2500 Útmutató

1 Április 2025
Bavaria

Bavaria BBC 43 Útmutató

30 Március 2025
Makita

Makita DST300 Útmutató

29 Március 2025
Makita

Makita BCM4300 Útmutató

28 Március 2025
Makita

Makita BCM2600 Útmutató

28 Március 2025
Makita

Makita BCM2310 Útmutató

28 Március 2025
Makita

Makita BCM3300 Útmutató

28 Március 2025