Használati útmutató StarTech.com SHELF-1U-20-FIXED-V

StarTech.com nincs kategorizálva SHELF-1U-20-FIXED-V

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com SHELF-1U-20-FIXED-V (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 16, 2021 4:40 PM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
1 1
Product IDs
SHELF-1U-12-FIXED-S
SHELF-1U-12-FIXED-V
SHELF-1U-20-FIXED-S
SHELF-1U-20-FIXED-V
Product Diagrams
Front - Angled View
Solid Vented
Component Function
1Mounting Holes Mount the into a or .1U Solid/Vented Shelf Rack Cabinet
2Shelf Lip
Mount the with the 1U Solid/Vented Shelf Shelf Lip
oriented downwards to prevent from catching Equipment
during storage and/or retrieval
Product Information
For the latest manuals, product information, technical specications, and declarations
of conformance, please visit:
www.StarTech.com/SHELF-1U-12-FIXED-S
www.StarTech.com/SHELF-1U-12-FIXED-V
www.StarTech.com/SHELF-1U-20-FIXED-S
www.StarTech.com/SHELF-1U-20-FIXED-V
Requirements
1U Available Rack Space
1U Solid/Vented Cantilever Shelf - 12/20 in. Depth
Warnings
Read the entire manual and ensure the instructions are fully understood before
assembling and/or using this product.
Before adding equipment to this product, ensure this product has been properly
mounted.
Ensure the weight of the equipment does not exceed the weight capacity of this
product. If the weight capacity is exceeded, personal injury or damage to the
equipment are possibilities. This product can support the following weight: up
to 55 lb. (25 kg). This product can only support the maximum weight capacity if 4
M6 Screws / Cage Nuts / Plastic Washers are used to ax this product to a rack or
cabinet.
Package Contents
1U Solid/Vented Shelf x 1
M6 Cage Nuts x 4
M6 Screws x 4
M6 Plastic Washers x 4
Quick-Start Guide x 1
Installation
Mount the 1U Solid/Vented Shelf into a Rack or Cabinet
Use the included , w , and to install the M6 Cage Nuts M6 Scre s M6 Plastic Washers 1U
Solid/Vented Shelf.
Notes: This product can support the following weight: 55 lb. (25 kg).
The following installation instructions are for square mounting holes.
1. Locate a suitable location in a or to mount the Rack Cabinet 1U Solid/Vented
Shelf.
Note: The itself requires of space within a or 1U Solid/Vented Shelf 1U Rack
Cabinet.
2. Insert the (side) of an into the back of the a .Wing M6 Cage Nut Cage Nut Hole
3. Insert the second of the into the selected , using Wing M6 Cage Nut Cage Nut Hole
pressure by hand, or with a .Cage Nut Tool
4. Repeat steps 2 and 3 to insert a total of 4 . Cage Nuts
*Product may vary from images
22
5. Thread an over an . Repeat until 4 M6 Plastic Washer M6 Screw M6 Screw
Assemblies have been prepared.
6. Align the in the with the Mounting Holes 1U Solid/Vented Shelf M6 Cage Nuts
installed in steps 2-4.
7. Insert the w through the in the M6 Scre Assemblies Mounting Holes 1U Solid/
Vented Shelf M6 Cage Nuts Phillips Head and into the and tighten, using a
Screwdriver.
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a lifetime warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands

Termékspecifikációk

Márka: StarTech.com
Kategória: nincs kategorizálva
Modell: SHELF-1U-20-FIXED-V

Szüksége van segítségre?

Ha segítségre van szüksége StarTech.com SHELF-1U-20-FIXED-V, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva StarTech.com

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva