Használati útmutató StarTech.com RKCONS1701

StarTech.com nincs kategorizálva RKCONS1701

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com RKCONS1701 (23 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/23

Manual Revision: 12/19/2018

User Manual

For the latest information and specications visit

www.startech.com/RKCONS1701

1-Port VGA Rackmount LCD Console | 17 in. | 1U

SKU#: RKCONS1701

Actual product may vary from photos

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any

interference, including interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables

aux appareils radio exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil

doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiring terminations should not be made with the product and/or electric

lines under power.

• Product installation and/or mounting should be completed by a certied

professional as per the local safety and building code guidelines.

• Cables (including power and charging cables) should be placed and routed

to avoid creating electric, tripping or safety hazards.

Mesures de sécurité

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit

et/ou les câbles électriques sont sous tension.

• L’installation et/ou le montage du produit doit être réalisé par un

professionnel certié et dans le respect des normes locales et du code de

construction local.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent

être placés et acheminés de façon à éviter tout risque électrique, de chute ou

de sécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に

従い、有資格の専門業者が行うようにしてください。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le

linee elettriche sotto tensione.

• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un

tecnico professionale certicato che conosca le linee guida locali sulle norme

edilizie e sulla sicurezza.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati

e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o

pericoli per la sicurezza.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Säkerhetsåtgärder

• Montering av kabelavslutningar får inte göras när produkten och/eller

elledningarna är strömförda.

• Installation och/eller montering får endast göras av behöriga yrkespersoner

och enligt gällande lokala förordningar för säkerhet och byggnormer.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

Warning Statements

• Make sure to assemble this product according to the instructions. Failure to

do so might result in personal injury or property damage.

• Never use this product if parts are missing or damaged.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements ........................................................................1

Safety Statements ..................................................................................3

Warning Statements ..............................................................................4

Product Diagram (RKCONS1901) .........................................................7

Front ............................................................................................................................................................... 7

Rear 8 ................................................................................................................................................................

Product Information ..............................................................................9

Packaging Contents 9 .................................................................................................................................

Hardware Kit Contents 9 ............................................................................................................................

Requirements 9 .............................................................................................................................................

Installation 10 ..............................................................................................

Mounting the Rack Console Drawer 10 ..................................................................................................

Grounding the LCD Console 11 .................................................................................................................

Connecting the LCD Console 11 ................................................................................................................

Opening the LCD Console 12 ......................................................................................................................

Closing the LCD Console 13 ........................................................................................................................

Panel Controls and On-Screen Display (OSD) Functions .................14

LCD Console Panel Menu 14 .......................................................................................................................

Auto Tuning the Display 14 .........................................................................................................................

Adjusting the Display’s Brightness 15 .....................................................................................................

Adjusting the Display’s Contrast 16 ..........................................................................................................

Adjusting the Display’s Color Settings 16 ..............................................................................................

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Adjusting the Image or OSD Position 17 ................................................................................................

Adjusting the Language 17 .........................................................................................................................

Resetting the LCD Console to Factory Settings.............................................................................. 18

Exiting the OSD 18 ..........................................................................................................................................

LED Indicator ..........................................................................................19

Conguration 19 ..........................................................................................

Testing the LCD Console 19 .........................................................................................................................

Conguring Display Settings 20 ................................................................................................................

Specications 20 ..........................................................................................

Important Considerations ....................................................................21

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Rear

Power

Connection

Port

Power

Switch

Ground

Connection

Screw

Host

Port

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Packaging Contents

• 1U LCD Rack Console Drawer x 1

• Console Cable Kit x 1

• Mounting Rails - Set x 1

• Power Adapter x 1

Hardware Kit Contents

• Side Rails with Brackets x 2

• Keys x 2

• Screw Kit x 1

Requirements

Requirements are subject to change. For the latest

requirements, please visit www.startech.com/RKCONS1701.

• 1U of Rack Space

• Grounding Wire

• Power Source

• Computer, Server, or KVM

• Phillips Head Screwdriver

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Installation

Mounting the Rack Console Drawer

Note: It’s easier to install the Rack Console Drawer if an-

other person helps you with the installation.

Warning: Use caution and proper lifting techniques when

installing the Rack Console Drawer.

1. Based on the mounting depth of the server rack that you are

using, select the appropriate length of .Mounting Rails

2. Decide where in the you want to install the Rack Rack

Console Drawer.

3. Insert the (two per mounting post) into the M5 Cage Nuts

square mounting holes on the Rack’s mounting posts.

4. Align the Rear Mounting Brackets (rails) M5 Cage with the

Nuts Rack on the corresponding mounting post.

5. Insert an (two per mounting post) through the M5 Screw

Rear Mounting Bracket (rail) M5 Cage Nut and into the . Do

not tighten the M5 Screws.

6. With assistance, slide the Rack Console Drawer into the

Rack, Rear Mounting Brackets (rails) guiding the into the

rail assembly.

7. Insert an (two per mounting post) through the M5 Screw

Front Mounting Bracket (rail) M5 Cage Nut into the .

8. Use a Phillips Head Screwdriver M5 Screws to tighten the .

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Grounding the LCD Console

Note: Grounding is recommended in environments with

high levels of electromagnetic interference (EMI), or frequent

electrical surges.

1. Using a Phillips Head Screwdriver Grounding , loosen the

Connection Screw.

2. Attach the Grounding Wire to the shaft of the Grounding

Connection Screw.

3. Tighten the Grounding Connection Screw, making sure not

to over-tighten.

4. Attach the other end of the Grounding Wire (not connected

to the LCD Console) to a proper earth-ground connection.

Connecting the LCD Console

To connect the LCD Console Computer KVM to a or , perform

the following steps:

1. Turn o the orComputer KVM Switch.

2. Connect the on the15-pin Host/KVM Connector KVM

Cable Host Port LCD Console to the on the and to a VGA

port and USB port on the rear panel of the orComputer

KVM Switch.

3. Connect the Power Cable Power Connection Port to the on

the LCD Console AC Electrical Outlet and to an .

4. Power on the LCD Console.

5. Power the or back on.Computer KVM

Termékspecifikációk

Márka:	StarTech.com
Kategória:	nincs kategorizálva
Modell:	RKCONS1701

Szüksége van segítségre?

Ha segítségre van szüksége StarTech.com RKCONS1701, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók nincs kategorizálva StarTech.com

StarTech.com P2ADD121D-KVM-SWITCH Útmutató

18 Március 2025

StarTech.com 1P1FFC-USB-SERIAL Útmutató

18 Március 2025

StarTech.com PATA2SATA2 Útmutató

10 Január 2025

StarTech.com MSAT2SAT3 Útmutató

10 Január 2025

StarTech.com M2E4SFF8643 Útmutató

10 Január 2025

StarTech.com IDE2SAT25 Útmutató

10 Január 2025

StarTech.com IDE2SAT Útmutató

10 Január 2025

StarTech.com OPT2SATA Útmutató

10 Január 2025

StarTech.com MSDREADU2OTG Útmutató

10 Január 2025

StarTech.com IDE2CF Útmutató

10 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

CyberPower BPSE72V40ART2U Útmutató

31 Március 2025

Spin Master 6026397 Útmutató

31 Március 2025

Evga XC3 Útmutató

31 Március 2025

InLine 61602C Útmutató

31 Március 2025

American DJ Ultra HEX Bar 12 Útmutató

31 Március 2025

TomTom GO Camper Tour (2nd Generation) Útmutató

31 Március 2025

Shure WA555 Útmutató

30 Március 2025

Einhell ESS 9000-T Útmutató

30 Március 2025

Einhell AV 10 Útmutató

30 Március 2025

American DJ POW-R Bar Rack USB Útmutató

30 Március 2025