Használati útmutató StarTech.com RDA1U

StarTech.com nincs kategorizálva RDA1U

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com RDA1U (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 04/19/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/RDA1U.

Package contents

• 2 x depth-adapter brackets

• 4 x 10-32 x 5/8 screws

• 4 x 10-32 cage nuts

• 1 x instruction manual

System requirements

• Server rack

• Phillips head screwdriver

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/RDA1U.

RDA1U

Rail Depth Adapter Kit for Server Racks - 1U

*actual product may vary from photos

Introduction

The depth-adapter kit addresses the frustration of having

components that are too long or too short for your current server

rack. Instead of having to purchase new components or server racks,

you can use the RDA1U to increase or decrease the mounting depth

of your server rack rails by 4 in. (10 cm).

Product diagram

Equipment-

mounting hole

Rack-mounting

hole

Technical specications

The depth-adapter brackets use one unit of your server rack and are

designed to support up to 10 lb. of weight.

Decrease the depth of your server rack

Note: When you install the brackets, make sure that the rack-

mounting holes are on the outside of the server rack.

1. Position one of the depth-adapter brackets so that the end with

the equipment-mounting holes extends into the server rack

( ).diagram 1

2. Insert a 10-32 x 5/8 screw through each of the rack-mounting

holes and into the server rack.

3. Repeat steps 1 and 2 for the second bracket.

diagram 1

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Increase the depth of your server rack

Note: When you install the brackets, make sure that the rack-

mounting holes are on the outside of the server rack.

1. Position one of the depth-adapter brackets so that the end with

the equipment-mounting holes extends outside of the server

rack ( ).diagram 2

2. Insert a 10-32 x 5/8 screw through each of the rack-mounting

holes and into the server rack.

3. Repeat steps 1 and 2 for the second bracket.

diagram 2