Használati útmutató Sonifex S2-ODA

Sonifex nincs kategorizálva S2-ODA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sonifex S2-ODA (173 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/173

S2 Digital I/O Analogue

Radio Broadcast Mixer

User Handbook

S2 User Handbook

Revision 2.21 February 2020

©Sonifex Ltd, 2000-2020

Sonifex Ltd, 61, Station Road, Irthlingborough,

Northants, NN9 5QE, England.

Tel : +44 (0)1933 650 700

Fax : +44 (0)1933 650 726

Email : sales@sonifex.co.uk or technical.support@sonifex.co.uk

Web : http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent

a commitment on the part of Sonifex Ltd. Sonifex Ltd shall not be liable for any loss or

damage whatsoever arising form the use of information or any error contained in

this manual.

No part of this manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying, recording, or information storage and

retrieval systems, for any purpose other than the purchaser’s personal use, without the

express written permission of Sonifex Ltd.

Unless otherwise noted, all names of companies, products and persons contained herein are

part of a completely ctitious adaptation and are designed solely to document the use of

Sonifex products.

For the latest Sonifex handbook information please visit the Sonifex website at

www.sonifex.co.uk

S2 User Handbook

CO N T E N T S

CON TEN TS

Warranty & Safety Information i

Warranty and Liability i

Returning the Warranty Card iii

Unpacking the S2 iii

Safety of Mains Operated Equipment iv

Fuse Rating iv

Power Cable and Connection iv

WEEE & RoHS Directives - Sonifex Statement v

Reporting Faults vi

1 Introduction 1

Innovative Design 1

Superb Audio Quality and Unquestionable Reliability 3

Features 3

2 Installation Notes 4

Atmosphere 4

Electromagnetic Radiation 4

Dimensions and Cut-Out Sizes 4

Channel Conguration 5

Connectors and Cabling 5

System Block Diagrams 9

Applications 11

Removing & Replacing Channels 13

Connecting A Split Desk 14

3 Power Supply 16

S2-PSU Power Supply (Old Version) 16

Front Panel 16

Rear Panel 17

Safety of Mains Operated Equipment 17

Ordering the Correct Mains Lead 18

Power Cable and Connection 18

Fuse Rating 18

S2-PSU Power Supply (New Version) 19

Front Panel Indicators 21

Rear Panel 22

4 Input Channels 25

S2-CML Mic/Line Input Channel 25

S2-CMM Mic/Mic Input Channel 25

S2-CS Dual Stereo Line Input Channel 25

S2-CSE Dual Stereo Line Input with EQ Channel 26

S2-CSG Stereo Line with Gram Input Channel 26

S2-CDS Digital Dual Stereo Input Channel 26

S2-CDSE Digital Dual Stereo Input with EQ Channel 26

S2-C6SS 6 Way Stereo Line Source Select Channel 26

S2-CT Telco Input Channel 26

S2-CSMM Stereo Mix-Minus Channel 27

S2-PG S2 Penny & Giles Conductive Plastic Fader 27

5 S2-CML Mic/Line Channel With EQ 28

Panel Controls 28

Rear Panel 29

Channel Options, Jumper Settings and Presets 30

S2 User Handbook

CON TEN TS

CO N T E N T S

6 S2-CMM Mic/Mic Channel With EQ 36

Panel Controls 36

Rear Panel 37

Channel Options, Jumper Settings and Presets 38

7 S2-CSE/S2-CS Dual Stereo Line Channel With & Without EQ 43

Panel Controls 43

Rear Panel 44

Channel Options, Jumper Settings and Presets 45

8 S2-CSGE/S2-CSG Stereo Line And Gram Channel With & Without EQ 52

Panel Controls 52

Rear Panel 53

Channel Options, Jumper Settings and Presets 54

9 S2 -CDSE/S2-CDS Digital Dual Stereo Line Channel With & Without EQ 61

Panel Controls 61

Rear Panel 62

Channel Options, Jumper Settings and Presets 63

10 S2-C6SS 6 Way Stereo Line Source Select Channel With EQ 70

Panel Controls 70

Channel Options, Jumper Settings and Presets 72

11 S2-CT Telco Channel With EQ 76

Panel Controls 76

Rear Panel 77

Channel Options, Jumper Settings and Presets 78

12 S2 CSMM Stereo Mix Minus Channel With EQ 83

Panel Controls 83

Rear Panel 84

Channel Options, Jumper Settings and Presets 85

13 Output Channels 92

S2-ODP Digital PGM Output Channel &S2-ODPF Digital PGM Output Channel

With Master Fader 92

S2-ODA Digital AUD Output Channel & S2-ODAF Digital AUD Output Channel

With Master Fader 92

S2-OMC Control Room Monitor Channel 92

S2-OMS Studio Monitor Channel 93

14 S2-ODPF/S2-ODP Digital Output PGM Channel With & Without

Master Fader (Version 1) 94

Panel Controls 94

Rear Panel 95

Channel Options, Jumper Settings and Presets 96

15 S2-ODPF/S2-ODP Digital Output PGM Channel With & Without

Master Fader (Version 2) 101

Panel Controls 101

Rear Panel 102

Channel Options, Jumper Settings and Presets 103

S2 User Handbook

F I G U R E S

FI GU RES

Figures

Fig 1‑1 : S2‑15 Chassis Complete with

Channels. 1

Fig 1‑2 : S2‑7SS Script Space. 2

Fig 2‑1 : Mixer Prole. 4

Fig 2‑2 : Mixer Cut‑Out Details. 5

Fig 2‑3 : XLR Connectors. 6

Fig 2‑4 : RCA Phono Connector. 6

Fig 2‑5 : BNC Connector. 6

Fig 2‑6 : 1/4” Jack Connectors. 7

Fig 2‑7 : 9 Pin & 15 Pin D‑Type

Connectors. 7

Fig 2‑8 : 25 Pin D‑Type Connectors. 8

Fig 2‑9 : 9 Pin D‑Type Power Connectors. 8

Fig 2‑10 : System Block Diagram

(Sheet 1). 9

Fig 2‑11 : System Block Diagram

(Sheet 2). 10

Fig 2‑12 : Using the Sonifex RB‑LC3 to

control an On‑Air Light. 11

Fig 2‑13 : Mixer Bus Cable Slots. 14

Fig 2‑14 : Mixer Bus Cable Screen

Connection. 14

Fig 2‑15 : Cable & Channel Connection. 15

Fig 2‑16 : Meterbridge Interconnection. 15

Fig 3‑1 : S2‑PSU Front Panel. 16

Fig 3‑2 : S2‑PSU Rear Panel. 16

Fig 3‑3 : New S2‑PSU Front Panel. 19

Fig 3‑4 : New S2‑PSU Rear Panel. 20

Fig 3‑5 : S2‑PSUS Front Panel. 21

Fig 3‑6 : S2‑PSUS Rear Panel. 22

Fig 3‑7: New S2‑PSU Diagram. 24

Fig 5‑1 : S2 Mic/Line Input Board

Layout. 32

Fig 6‑1 : S2 Mic/Mic Input Board

Layout. 40

Fig 7‑1 : S2 Dual Stereo Input With &

Without EQ Board Layout. 46

Fig 8‑1 : S2 Stereo Line & Gram With &

Without EQ Board Layout. 55

Fig 9‑1 : S2 Digital Dual Stereo Input

Board Layout. 64

Fig 10‑1 : S2 6 Way Source Selector

Board Layout. 73

Fig 11‑1 : S2 Telco Input Board Layout. 79

Fig 12‑1 : S2 Stereo Mix‑Minus Board

Layout. 86

Fig 14‑1 : S2 Digital PGM Output Board

Layout. 97

Fig 14‑2 : S2 Digital PGM Output With

Fader Board Layout. 98

Fig 15‑1 : S2 Digital PGM Output Board

Layout. 105

Fig 15‑2 : S2 Digital PGM Output With

Fader Board Layout. 105

Fig 16‑1 : S2 Digital AUD Output Board

Layout. 111

Fig 16‑2 : S2 Digital AUD Output With

Fader Board Layout. 112

Fig 17‑1 : S2 Digital AUD Output Board

Layout. 118

Fig 17‑2 : S2 Digital AUD Output With

Fader Board Layout. 118

Fig 18‑1 : Control Room Monitor Board

Layout. 124

Fig 19‑1 : Studio Monitor Board

Layout. 130

Fig 20‑1 : Meterbridge Distribution Board

Layout. 135

Fig 20‑2 : Blanking Plate. 136

Fig 20‑3 : Loudspeaker Monitor Panel. 136

Fig 20‑4 : PPM & True PPM Meter Panel. 137

Fig 20‑5 : VU Meter Panel. 137

Fig 20‑6 : VU & PPM LED Meter Panel. 138

Fig 20‑7 : Phase Meter Panel. 139

Fig 20‑8 : Meterbridge 6 Way Talkback

Panel. 140

Fig 20‑9 : Meterbridge Station Master

Talkback Panel. 141

Fig 20‑10a : S2‑M6SS Panel. 143

Fig 20‑10b : S2‑M6SS Diagram. 144

Fig 20‑11a : S2‑MSB1 S2 Meterbridge

Switch Panel With 1 Button. 145

Fig 20‑11b : S2‑MSB1 Diagram. 145

Fig 20‑12a : S2‑MSB3 S2 Meterbridge

Switch Panel With 3 Buttons. 145

Fig 20‑12b : S2‑MSB3 Diagram. 145

Fig 20‑13 : Meterbridge Timer Panel. 146

S2 User Handbook i

WAR R A N TY & S A F ETY

I N F O RMAT I O N

WARRANTY & SAFE TY INFORMATION

Warranty & Safety Information

Warranty and Liability

Important: the purchaser is advised to read this clause

(a) The Company agrees to repair or (at its discretion) replace Goods which are found to

be defective (fair wear and tear excepted) and which are returned to the Company

within 12 months of the date of despatch provided that each of the following are

satised:

(i) notication of any defect is given to the Company immediately upon its

becoming apparent to the Purchaser;

(ii) the Goods have only been operated under normal operating conditions and

have only been subject to normal use (and in particular the Goods must have

been correctly connected and must not have been subject to high voltage or

to ionising radiation and must not have been used contrary to the Company’s

technical recommendations);

(iii) the Goods are returned to the Company’s premises at the Purchaser’s expense;

(iv) any Goods or parts of Goods replaced shall become the property of the

Company;

(v) no work whatsoever (other than normal and proper maintenance) has been

carried out to the Goods or any part of the Goods without the Company’s prior

written consent;

(vi) the defect has not arisen from a design made, furnished or specied by the

Purchaser;

(vii) the Goods have been assembled or incorporated into other goods only in

accordance with any instructions issued by the Company;

(viii) the defect has not arisen from a design modied by the Purchaser;

(ix) the defect has not arisen from an item manufactured by a person other than

the Company. In respect of any item manufactured by a person other than the

Company, the Purchaser shall only be entitled to the benet of any warranty or

guarantee provided by such manufacturer to the Company.

S2 User Handbook iii

WAR R A N TY & S A F ETY

I N F O RMAT I O N

WARRANTY & SAFE TY INFORMATION

Returning the Warranty Card

In order to register the date of purchase so that we can keep you informed of any design

improvements or modications, it is important to complete the warranty registration

document that is enclosed and return it to Sonifex Ltd in the UK, or register online at

www.sonifex.co.uk/register

For your own records you should write down the serial number of both the power supply

and the mixer chassis (2 for a split desk).

1st Mixer Serial Number

2nd Mixer Serial Number

(split desk only)

Power Supply Serial Number

Unpacking the S2

Each product is shipped in protective packaging and should be inspected for damage.

before use. Where an item is found to have transit damage, notify your supplier immediately

with all the relevant details of the shipment. Packing materials should be kept for inspection

and also for if the product needs to be returned.

S2 User Handbook 5

Fig 2‑2 : Mixer Cut‑Out Details.

Channel Conguration

Each of the channels can be re‑congured by jumpers, which are displayed in the “Channel

Options and Jumper Settings” section of each chapter. You should ensure that you are

thoroughly familiar with the settings available for each channel before attempting

installation of the mixer. This is because some options may involve moving jumpers on

several channels to change the conguration of the mixer.

Connectors and Cabling

Many of the problems associated with installing and maintaining a mixing console are due

to the use of poor cables or faulty connections. It is recommended that, wherever possible,

pre‑wired cables are purchased from recommended manufacturers. If you need bespoke

cables making, please ensure that a qualied engineer carries out the work.

I N STA L L ATI ON N OTE S

IN STALLATION NOTES

196mm S2-5

387mm S2-10

577mm S2-15

768mm S2-20

958mm S2-25

1149mm S2-30

Woodwork

Front Edge

506mm

40mm 276mm

Woodwork

Rear Edge

6S2 User Handbook

The main types of connectors used with the S2 mixers are the following:

XLR 3 Pin Connectors

The following diagram shows the pin details for the 3 pin XLR sockets and plugs:

Fig 2‑3 : XLR Connectors.

RCA Phono Connector

This connector is used on the Stereo Gram Channel and the S/PDIF inputs on the digital

input/output channels.

Fig 2‑4 : RCA Phono Connector.

BNC Connector

This connector is used for the Word clock inputs on the PGM and AUD output channels.

Fig 2‑5 : BNC Connector.

I N S TA L L AT I O N N O T E S

I N S TA L L AT I O N N OT E S

Pin 2. Hot (In Phase) Signal

Pin 1. Ground (Screen) Signal

Pin 3. Cold (Out Of Phase) Signal

3 Pin Socket

(Female)

Line, Mic &

AES/EBU Inputs

C/F, L/R Stereo &

AES/EBU Outputs

3 Pin Socket

(Male)

Pin 2. Hot (In Phase) Signal

Pin 1. Ground (Screen) Signal

Pin 3. Cold (Out Of Phase) Signal

Inner

. Hot (In Phase) Signal Outer. Ground (Screen) Signal

Gram & S/PDIF

Inputs

RCA Phono

(Female)

Inner

. Hot (In Phase) Signal Outer

. Ground (Screen) Signal

Word Clock

Inputs

BNC (Female)

Termékspecifikációk

Márka:	Sonifex
Kategória:	nincs kategorizálva
Modell:	S2-ODA

Szüksége van segítségre?

Ha segítségre van szüksége Sonifex S2-ODA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók nincs kategorizálva Sonifex

Sonifex HY-03T Útmutató

2 Április 2025

Sonifex CM-CU21 Útmutató

14 Január 2025

Sonifex PS-SEND Útmutató

14 Január 2025

Sonifex DHY-04T Útmutató

14 Január 2025

Sonifex Redbox RB-MA1 Útmutató

12 Január 2025

Sonifex Redbox RB-LI2 Útmutató

2 Szeptember 2024

Sonifex PC-DIG4 Útmutató

1 Szeptember 2024

Sonifex AVN-GMCOS Útmutató

1 Szeptember 2024

Sonifex PC-AUR44 Útmutató

1 Szeptember 2024

Sonifex AVN-GMCS Útmutató

1 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA SR-P Útmutató

10 Április 2025

Soundstream VRN-64HBL Útmutató

10 Április 2025

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025

Planet PWR-240-48 Útmutató

9 Április 2025

CaterChef 445001 Útmutató

9 Április 2025

IFM E40581 Útmutató

9 Április 2025

Livn Bolt Útmutató

9 Április 2025

Livn Beats Útmutató

9 Április 2025

Alpine DP2-40C-BC Útmutató

9 Április 2025

IFM O3R252 Útmutató

9 Április 2025