Használati útmutató Siemens WM12P260GC

Siemens mosógép WM12P260GC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Siemens WM12P260GC (10 oldal) a mosógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/10

1 2 3 4 5 6

Display panel

Function buttons/Option buttons

Programme selector Start/Pause

¥Ê – É¯ ¥Ê°C (Temperature) Select the temperature ( = cold)

- - - - – * (Spin speed) Select the spin speed (* depending on model) or³¯¯ 

- - - - (Rinse hold = without final spin, the washing remains in

the final rinsing water, - - - - on the display panel)

³¤ ¤–  (Ready in) Programme ends in ...

Status displays Programme progress displays:

tüümüü üc §Ê Washing, Rinse, Spin, programme duration or end

- - PauseÆ

sChildproof lock aPage 5

Programme selector for

switching the machine on

and off and for selecting

the programme. Can be

rotated in either direction.

Individual settings

ʑSignal

1. Activate setting mode for signal volume

2. information signalsa) Selecting volume of the

2. button signalsb) Selecting volume of the

Activating the

setting mode

set to press and 

hold

rotate it one

step to the

right

press the button and hold

down for aprox. 5 sec., until

display elements are lit;

setting mode is activated

set to , setting mode for 

signal volume is left

press the button until

the required volume is

reached

rotate it one

step to the

right

press the button until the

required volume is reached set to , setting mode

for signal volume is left

Sorting and inserting the washing

Follow manufacturer’s care information!

According to the information on the care labels.

According to type; colour; soiling and temperature.

Do not exceed maximum load. aPage 7

Follow important instructions! Page 9a

Insert large and small items of washing!

Close the door. Do not jam items of washing between the washing machine

door and rubber seal.

Add detergent and care product

Dose according to:

amount of washing, soiling, water hardness (available from your water utility

company) and manufacturer’s instructions.

For models without insert for liquid detergent:

Pour liquid detergent into corresponding dispenser and place in drum.

Caution when opening the detergent drawer while the appliance is running!

Insert for liquid detergent (depending on model), Page 10

Your washing machine Intended use

Contents Page

ʋIntended use ....................................................................................... 1

ʋProgrammes........................................................................................ 1

ʋSelecting and adjusting a programme........................................... 3

ʋWashing ........................................................................................... 3/4

ʋAfter washing ...................................................................................... 4

ʋIndividual settings........................................................................... 5/6

ʋOverview of programmes ................................................................. 7

ʋSafety instructions .............................................................................. 8

ʋConsumption values .......................................................................... 8

ʋImportant information ........................................................................ 9

ʋInsert for liquid detergent ...............................................................10

ʋCare/Cleaning...................................................................................10

ʋInformation on the display panel...................................................10

ʋMaintenance......................................................................................11

ʋWhat to do if … ................................................................................12

ʋEmergency lock release .................................................................13

ʋCustomer service .............................................................................13

Protection of the environment/Hints and tips

– Utilise the maximum amount of washing for the particular

programme.

– Wash normally soiled washing without prewash.

– Instead of the programme, select ÊCottons 90 °C

ºIntensive 60 °C. Comparable cleaning result with

significantly lower energy consumption.

– Meter detergent according to the manufacturer’s instructions

and water hardness.

– If the washing is then dried in the tumble dryer, select spin speed

according to the instructions of the dryer manufacturer.

Preparation Before using your washing machine for the first time

wash once without any washing Page 9a

Selecting ** and adjusting a programme 1

Washing

Dispenser ~: Fabric softener, starch

Dispenser I: Detergent for prewash

ʋfor use in the household only,

ʋfor washing machine-washable textiles and hand-

washable wool in wash liquor,

ʋto be operated with cold drinking water and commercially

available detergents and care products which are suitable

for use in washing machines.

ʋThe washing machine may be operated by children from

8 years of age, by persons who have limited physical,

sensory or mental abilities and by persons who have

inadequate experience or knowledge, provided they are

supervised have been instructed or by a responsible

person.

– Do not leave children unattended near the washing

machine!

– Children must not play with the appliance.

– Children must not perform any cleaning or

maintenance work without supervision!

– Keep pets away from the washing machine!

Dilute viscous fabric softener and fabric conditioner with water.

Prevents blockage of the overflow.

Detergent drawer

with dispensers I, II, ~

Fascia

Service flap

Door

Correct installation according

to separate installation instructions.

Checking the machine

– Never switch on a damaged machine!

– Inform your customer service!

Insert mains plug

– With dry hands only!

– Take hold of the plug only!

Turn on the tap

Washing

End of programme when ...

... is indicated on the display panel.§Ê

Cancelling the programme

For programmes at high temperature:

– Cool washing: Select .mRinse

– Press /Pause button.Start

For programmes at low temperature:

– Select Spin/

//Empty l (if only a drained cycle

is required: Set (Spin speed) to - - - -).

– Press /Pause button.Start

Change programme if ...

... you have mistakenly selected a wrong programme:

– Reselect programme.

– Press /Pause button. The new programme Start

starts from the beginning.

Interrupt/continue

the wash cycle ...

... e.g. for Soaking. aPage 9

Press the Start/ button. - - is indicated on the Pause Æ

display panel, washingmachine door cannot be opened.

To continue the programme, press the /Pause Start

button.

Individual settings

ʑFunction buttons

You can change the spin speed and temperature beforehand and while the selected

programme is running. Effects dependent on the programme progress.

°C (Temperature)

You can change the indicated washing temperature. The maximum washing temperature

which can be selected depends on the set programme.

 (Spin speed, revolutions per minute)/

;

(Rinse stop = without final spin)

You can change the indicated spin speed or select ; (Rinse hold = without final spin cycle,

washing remains in the water after the last rinse cycle, display panel - - - -). The selectable

maximum spin speed depends on the model and the selected programme.

 (Ready in)

The respective programme duration is displayed by selecting the programme.

The programme start can be delayed before the programme begins. The Ready in time can

be set in hour steps up to maximum 24h. Keep pressing the (Ready in) button until the 

required number of hours is indicated (h=hour). Press /Pause button. Start

ʑOption buttons aOverview of programmes, Page 7

speedPerfect iFor a shorter wash time with a comparable washing effect

to the standard programme. Maximum load size.

aOverview of programmes, Page 7

ecoPerfect ¢For saving energy with a comparable washing effect to the standard

programme.

Easy Iron ÎSpecial spin sequence with subsequent fluffing. Gentle final spin –

residual moisture in the washing increased slightly.

ʑChildlock

on the display panel

Secure the washing machine to prevent the set functions from being

unintentionally changed.

ON/OFF Start: After the programme starts/ends press /Pause

for approx. 5 seconds.

Note: Childproof lock may remain activated until the next programme

starts, even after the machine has been switched off!

Then deactivate the childproof lock before the programme starts and,

if required, re-activate after the programme starts.

ʑStart/Pause

For starting or interrupting the wash cycle and to continue the programme and to activate/

deactivate the childproof lock.

Switching off

Set programme selector to .ÃOff

Turn off tap

Not required for Aqua-Stop models.

aNotes, Installation instructions, Page 7

Remove the washing

Open washing machine door and remove washing.

If - - - - (Rinse hold = without final spin) active:

Set programme selector to or select Spin/Empty l

spin speed.

Press /Pause button.Start

– Remove any foreign objects – risk of rusting.

– Leave detergent drawer and door open so that

residual water can evaporate.

Congratulations – You have opted for a modern, high-quality

domestic appliance manufactured by Siemens. The washing machine

is distinguished by its economical consumption of water and energy.

Each appliance which leaves our factory is inspected thoroughly

to ensure that it functions properly and is in perfect condition.

Further information on our products, accessories, spare parts and

services can be found at: or contact our www.siemens-home.com

customer service centres.

Environmental disposal 

Dispose of packaging in an environmentally friendly manner.

This appliance has been identified in accordance with the European

Directive 2002/96/EG on Waste Electrical and Electronic Equipment

(WEEE).

The Directive specifies the framework for an EU-wide valid return and

recycling of waste appliances.

Dispenser II: Detergent for main wash,

water softener, bleach, stain remover

Programmes

Detailled overview of programmes aPage 7

Temperature and spin speed can be selected individually

irrespective of the selected programme and programme

progress.

ÊCottons Hard-wearing textiles

o+ Prewash Hardwearing textiles, Prewash at 30°C

ºIntensive Energy saving programme for hard-

wearing textiles

ÏEasy-Care Easy-care textiles

o+ Prewash Easy-care textiles, Prewash at 30°C

ÍMix Different types of washing

5Delicate/Silk Delicate, washable textiles

ÿ ÉüWool Hand or machine-washable wool or

rich-wool textiles

mRinse Extra rinse with spin

Spin/Empty lExtra spin with selectable spin speed or

the rinsing water is drained after - - - -c

(Rinse stop = without final spin) setting;

set (spin speed) to - - - -

6Super 15’ Short programme

Super 30’ Short programme

¬Sensitive Hardwearing textiles; for especially

sensitive skin, extended wash cycle

at higher water level, additional rinse

cycle

gShirts/Business Non-iron shirts

ÎEasy Care Plus Dark textiles

Selecting Start/Pause

If the function buttons are pressed

for longer time, the selected

display values will run auto-

matically!

** If the symbol flashes on the s

display panel, childproof lock

active. Deactivate, aPage 5

Functions and option buttons a

Individual settings, Page 5

Door handle

9202 / 9000734304

9000734304 WM12P260GC

Siemens-Electrogeräte GmbH

Carl-Wery-Str. 34

81739 München/Deutschland

Overview of programmes a Observe table of consumption values on Page 8 and instructions on Page 9!

*reduced load for optionspeedPerfect i

Programmes without prewash – pour detergent into dispenser , programmes with prewash – divide detergent between dispensers and .II I II

Programmes °C max. Type of washing Options; information

ÊCottons ¥Ê - 90 C°

8 kg/

4 kg *

Hard-wearing textiles, heat-resistant textiles made

of cotton or linen

speedPerfect ecoPerfect Easy Iron i*, ¢, Î

o+ Prewash

ºIntensive

¥Ê – 60 °C

¬Sensitive

speedPerfect ecoPerfect Easy Iron i*, ¢, Î;

for especially sensitive skin, extended wash cycle at selected

temperature, higher water level, additional rinse cycle

ÏEasy-Care ¥Ê – 60 °C

3.5 kg

Easy-care textiles made of cotton, linen, synthetic fibres

or blended fabrics speedPerfect ecoPerfect Easy Iron i , ¢, Î

o+ Prewash

ÍMix ¥Ê – 40 °C Textiles made of cotton or easy-care textiles speedPerfect ecoPerfect Easy Iron i , ¢, Î;

different types of washing can be washed together

ÎEasy Care Plus ¥Ê – 40 °C Dark textiles made of cotton and dark easy-care textiles speedPerfect ecoPerfect Easy Iron i , ¢, Î;

reduced rinse and final spin cycle

gShirts/Business ¥Ê – 40 °C

2 kg

Non-iron shirts made of cotton, linen, synthetics fibres

or blended fabrics

speedPerfect ecoPerfect Easy Iron i , ¢, Î;

Easy Iron: short spin only, hang up dripping wet

5Delicate/Silk ¥Ê – 40 °C For delicate, washable textiles, e.g. made of silk, satin,

synthetic fibres or blended fabrics (e.g. curtains) speedPerfect ecoPerfect Easy Iron i , ¢, Î

ÿ ÉWool ¥Ê – 40 °C Hand or machine-washable wool or rich-wool textiles especially gentle wash programme to prevent shrinkage, longer

programme pauses (textiles rest in wash liquor).

6Super 15‘ ¥Ê – 40 °C Easy-care textiles made of cotton, linen, synthetic fibres

or blended fabrics short programme, suited for slightly soiled laundry

Super 30‘

Additional programmes Rinse, Spin/Empty ml

Safety instructions

– Read and follow the operating and installation instructions and all other information

enclosed with the washing machine.

– Retain documents for subsequent use.

Risk of electric shock – Never pull out the mains plug by tugging the power cord!

– Insert/pull out the mains plug with dry hands only.

Danger to life On redundant appliances:

– Pull out the mains plug!

– Sever the power cord and discard together with the plug.

– Destroy the lock on the washing-machine door. This will prevent

children from locking themselves in and suffocating.

Risk of suffocation – Keep packaging, plastic film and packaging parts out of the reach

of children.

Risk of poisioning – Keep detergents and care products out of the reach of children.

Risk of explosion – Caused by detergents containing solvents, e.g. stain remover/

items of washing pretreated with solvent naphtha may result in an

explosion after being loaded into the washing machine.

Before hand thoroughly rinse items of washing by hand.

Risk of injury – Washing machine door may become very hot.

– Caution when draining hot detergent solution.

– Do not climb on the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum in case it is still rotating.

Consumption values

Programme Load Current Water Programme duration*** *** ***

ÊCottons 30 °C * 8 kg 0.57 kWh 80 l 2:40 h

ÊCottons 40 °C * 8 kg 1.08 kWh 80 l 2:40 h

ÊCottons 60 °C * 8 kg 1.53 kWh 80 l 2:40 h

ÊCottons 90 °C 8 kg 2.52 kWh 96 l 2:30 h

ÏEasy-Care 40 °C * 3.5 kg 0.59 kWh 47 l 1:23 h

ÍMix 40 °C 3.5 kg 0.52 kWh 44 l 1:05 h

5Delicate/Silk 30 °C 2 kg 0.16 kWh 33 l 0:43 h

ÿ ÉWool 30 °C 2 kg 0.17 kWh 40 l 0:40 h

* Programme setting for test according to currently valid European standard 60456.

Information about comparability tests: To test the test programmes, wash indicated load size

at maximum spin speed.

Programme Load Annual energy consumption Annual water consumption

ºIntensive 40/60 °C ** 8 kg/4 kg 204 kWh 12500 l

** Programme settings for testing and energy labelling according to directive 2010/30/EU with

cold water (15 °C).

*** The values may deviate from the stated values depending on water pressure and hardness,

room temperature, type and amount of laundry, detergents used, fluctuations in the mains

voltage and selected options.

Important informations

Before using your washing machine for the first time

Do not put any washing in the washing machine! Turn the tap on.

Pour into dispenser :II

– approx. 1 litre of water

– Detergent (dosage according to manufacturer’s instructions for light soiling and according

to degree of water hardness).

Set programme selector to and select /Pause. ÊCottons 90 °C Start

At the end of the programme set the programme selector to .ÃOff

Protecting the washing and the machine

– When dosing all detergents, cleaning aids and cleaning agents, always follow the

manufacturer's instructions.

– Empty pockets.

– Remove metal parts (paper clips, etc.).

– Wash delicates in the net/bag (tights, curtains, underwired bras).

– Close zips, button up covers.

– Brush sand out of pockets and collars.

– Remove curtain fittings or include in the net/bag.

Insert laundry

Insert large and small items of washing!

Do not jam items of washing between the washing machine door and rubber seal.

Washing with different degrees of soiling

Wash new items separately.

Light Do not prewash. If required, select option.speedPerfect i

If required, pretreat stains.If required, select the ºIntensive programme.

Heavy Load less washing. Select programme with Prewash.

Soaking Load washing of the same colour.

Pour soaking agent/detergent into dispenser II according to the manufacturer’s instructions.

Set programme selector to and select /Pause. After approx. ÊCottons 30 °C Start

10 minutes press Start/ to stop the programme. After the required soaking time Pause

re-press /Pause, if the programme is to be continued or change the programme.Start

Starching Washing should not be treated with fabric softener.

Liquid starch can be used in all wash programmes. Pour starch into the fabric softener

dispenser according to manufacturer’s specifications (if required clean beforehand).~

Dyeing/Discolouring

Dye in household quantities only. Salt may attack stainless steel! Observe specifications

of the dye manufacturer! Do discolour washing in the washing machine!not

Insert for liquid detergent depending on model

Position insert for dosing liquid detergent:

– Completely remove detergent drawer. aPage 10

– Push insert forwards.

Do not use insert (push upwards):

– For gel-like detergents and washing powders.

– for programmes with Prewash or (Ready in) function.

Care/Cleaning

ʑMachine housing, control panel

– Remove detergent residue immediately.

– Wipe with a soft, damp cloth.

– Do not clean the appliance with a water jet.

Clean the detergent drawer ...

... if it contains detergent or fabric softener residue.

1. Pull out, depress insert, take out drawer all the way.

2. Take out insert: using your finger, press insert upwards.

3. Clean detergent dispenser and insert with water and a brush and dry.

4. Attach insert and lock into position (push cylinder onto guide pin).

5. Insert detergent drawer.

Leave detergent drawer open so that residual water can evaporate.

ʑDrum

Leave washing machine door open so that the drum can dry out.

Rust stains – use chlorine-free cleaning agent, not steel wool.

ʑDescaling No washing in the machine!

Not required if detergent dosed correctly. However, if this does occur, follow the instructions

of the descaling agent manufacturer. Suitable descalers can be purchased on our website

or from customer service. aPage 13

Information on the display panel depending on model

§ ³Å: Turn on tap (cold water) fully.

Supply hose kinked/jammed, water pressure too low.

aPage 11: Maintenance, Clean filter

§ ³µ: Drain pump blocked. Maintenance, Cleaning the drain pump aPage 11:

Drainage hose/outlet pipe blocked. Maintenance, Cleaning the aPage 11:

drainage hose on the siphon

§ ´: Water in the base pan, appliance leaking. Turn off the tap. Call customer service!

sActivate/Deactivate childproof lock, aPage 5

Other

displays

Switch off appliance, wait 5 seconds and switch on again. If the display is indicated

again, call customer service.

Page 13

– Pull out the mains plug!Risk of electric shock!

– No solvents!Risk of explosion!

Risk of scalding!

– Allow detergent solution to cool down!

– Turn off the tap!

Maintenance

Drain pump blocked

Set programme selector to , pull out the mains plug.ÃOff

1. Open service flap.

2. Take the drainage hose out of the holder.

3. Remove sealing cap, allow detergent solution to flow out. Have a suitable

container ready.

Push up the closing cap and place the drain hose back in its holder.

4. Carefully unscrew the pump cover (Caution! residual water).

Clean the interior, pump cover thread and pump housing (fan impeller

in the detergent-solution pump must rotate).

5. Reinsert and screw on pump cover. Handle should be vertical.

6. Close the service flap.

To prevent unused detergent from flowing into the outlet during the next

wash: Pour 1 litre of water into dispenser II and start the Spin/Empty l

programme.

Drainage hose on the siphon blocked

Set programme selector to , pull out the mains plug.ÃOff

1. Loosen hose clip, carefully remove drainage hose (Caution! residual

water).

2. Clean drainage hose and siphon spigot.

3. Re-attach drainage hose and secure connection point with hose clip.

Filter blocked in water inlet hose

Risk of electric shock!

Do not immerse Aqua-Stop safety device in water (contains electric valve).

Release water pressure in the supply hose:

1. Turn off the tap!

2. Select any programme (except mRinse// ).Spin/Empty l

3. StartPress /Pause button. Leave programme for approx. 40 seconds.

4. OffSet programme selector to Ã. Pull out the mains plug.

Clean the filter:

5. Disconnect the hose from the water tap.

Clean filter with small brush.

and/or for standard and Aqua-Secure models:

remove hose from the rear of the appliance.

Take out filter with pliers and clean.

6. Connect the hose and check for leaks.

What to do if …

Water is running out. – Correctly attach/replace drainage hose.

– Tighten screw-fitting on the supply hose.

ʑWater not flowing in.

Detergent not washed in.

– /Pause not selected?Start

– Tap not open?

– Filter blocked? Cleaning the filter aPage 11

– Supply hose kinked or jammed?

ʑWashing-machine door

cannot be opened.

– Safety function active. Stop programme? aPage 4

– - - - - (Rinse stop = without final spin) selected? aPage 3, 4

– Can be opened via emergency release only? aPage 13

ʑProgramme does not

start.

– /Pause or (Ready in) time selected?Start 

– Door closed?

– Childlock active? Deactivate aPage 5

ʑDetergent solution is not

drained.

– - - - - (Rinse stop = without final spin) selected? aPage 3, 4

– Clean detergent-solution pump. a Page 11

– Clean outlet pipe and/or drainage hose.

ʑWater not visible in the

drum.

– Not a fault – water below the visible area.

ʑSpin result not

satisfactory, washing

wet/too damp.

– Not a fault – unbalanced load detection system has stopped

the spin cycle, washing unevenly distributed.

Distribute small and large items of washing in the drum.

– selected? Easy Iron ÎaPage 5

– Too low speed selected? aPage 5

ʑThe programme duration

changes during the wash

cycle.

– Not a fault – the programme sequence is optimised for the

particular wash process. This may result in changes to the

programme duration in the display field.

ʑSpin cycle actuated

several times.

– Not a fault – unbalanced load detection system adjusts

imbalance.

ʑResidual water in the

dispenser for care

product 0.

– Not a fault – effect of the care product not impaired.

– If required, clean insert. aPage 10

ʑOdour formation in the

washing machine.

– Run programme without washing. ÊCottons 90 °C

Use standard detergent.

ʑFoam comes out of the

detergent drawer.

– Too much detergent used?

Mix 1 tablespoon of fabric softener with ½ litre of water and pour

into dispenser II.

(Not for outdoor, sports and down-filled textiles!)

– Reduce detergent dosage for the next wash cycle.

ʑLoud noise formation,

vibrations and “Wander-

ing” during spin cycle.

– Appliance feet fixed?

Secure appliance feet. aInstallation Instructions

– Transportation protection devices removed?

Remove transportation protection devices.

aInstallation Instructions

ʑDisplay panel/indicator

lights do not function

while the appliance is

running.

– Power failure?

– Fuse tripped? Switch on/replace fuse.

– If the fault occurs repeatedly, call customer service.

ʑThe programme takes

longer than usual.

– Not a fault – unbalanced load detection system adjusts

imbalance by repeatedly distributing the washing.

– Not a fault – foam detection system active – a rinse cycle

is switched on.

What to do if …

Detergent residue on the

washing.

– Occasionally phosphate-free detergents contain water-insoluble

residue.

– Select or brush the laundry after washing.mRinse

If a fault cannot be rectified (switching the machine on and off) or a repair is required:

– Set programme selector to and pull out the mains plug.ÃOff

– Turn off the tap and call customer service. aInstallation instructions

Emergency release e.g. if power failure occurs

The programme continues running when the power supply is restored. If the washing is still

to be removed, the door can be opened as described below:

Risk of scalding!

Wash liquor and washing may be hot. If required, leave to cool down.

Do not reach into the drum in case it is still rotating.

Do not open the door if you can still see water through the glass.

1. OffSet programme selector to Ã, pull out the mains plug.

2. Drain detergent solution. aPage 10

3. Take the emergency release out of the holder.

Pull down emergency release with a tool and release.

Door can then be opened.

Customer service

ʑIf you cannot rectify the fault yourself (What to do if ... , aPage 12, 13), please contact

our customer service. We will always finds a suitable solution to avoid unnecessary visits

by technicians.

ʑYou can find the contact data for your nearest customer service here or in the customer

service list (depending on model).

– GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply.

– 01450 2655IE

ʑPlease give customer service the product number (E-Nr.) and the production number (FD)

of the appliance.

Product number Production number

These instructions can be found on: inside

of washing machine door */open service

flap * and rear of the appliance.

* depending on model

ʑRely on the competence of the manufacturer. Contact us.

You can therefore be sure that the repair is carried out by trained service technicians

who carry original spare parts.

Operating instructions

Washing

machine

Follow the safety

instructions on

Page 8!

Do not switch on the washing machine until you have

read these instructions and the separate Installation/

Maintenance instructions!

1 2

Display panel

Function buttons/Option buttons

Programme selector

¥Ê – É¯ ¥Ê°C (Temperature) Select the temperature (

- - - - – * (Spin speed) Select the spin speed (* depending on ³¯¯ 

³¤ ¤–  (Ready in) Programme ends in ...

Status displays Programme progress displays:

tüümüü üc §Ê

- -Æ

Programme selector for

switching the machine on

and off and for selecting

the programme. Can be

rotated in either direction.

a

Close the door. Do not jam items of washing between

amount of washing, soiling, water hardness (availab

Caution when opening the detergent drawer while the

Insert for liquid detergent (depending on model), Page 10

Your washing machine Intended use

Contents Page

ʋIntended use ....................................................................................... 1

ʋProgrammes........................................................................................ 1

ʋSelecting and adjusting a programme........................................... 3

ʋWashing ........................................................................................... 3/4

ʋAfter washing ...................................................................................... 4

ʋIndividual settings........................................................................... 5/6

ʋOverview of programmes ................................................................. 7

ʋSafety instructions.............................................................................. 8

ʋConsumption values.......................................................................... 8