Használati útmutató Sharp SKMD30F0AS

Sharp Magnetron SKMD30F0AS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sharp SKMD30F0AS (4 oldal) a Magnetron kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
E 1
C
N
H
E
F
D
A
B
J
L
I
M
K
G
Note: the face of the shelf must
sit 1 3/ "4 (44.45 mm) back from
the face of the cabinet.
cabinet face
shelf face O
24" Flush Mount DeFlector Vent: sKMD24F0As
INSTALLATION INSTRUCTIONS
1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.
CL
Top view
A
Anti-Tip block
Mounting cleat
BC
Drawer face Cabinet
face
Note: the mounting surface of the finished cleat must sit 1
1/ " (26.97 mm)16 back
from the face of the cabinet [pushing the face of the drawer out 1/ " (6.35 mm)4].
Figure 1
Figure 2A
Important notes to the Installer
 • Read all of the Installation Manual that is included with
the Microwave Drawer before installing in the ush mount
conguration.
 • Observe all governing codes, ordinances, and safety
instructions.
 •Be sure to leave these instructions with the consumer.
Parts includes:
Qty. Part number
1
PREF-B019MRP0
Flush Mount
Deector Vent
2LX-CZB055MRE0
Mounting screws
T I N S EB 5 41M R R 2
A. 6" (152.40 mm)
B. Suggested electrical outlet location
C. Anti-Tip block
D. 5" (127 mm)
E. 3-1/2" (88.90 mm)
F. 4" (101.60 mm)
G. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
H. 14-13/16" (376.24 mm) to bottom of
Anti-Tip block
I. 1-1/16" (26.97 mm)
J. 23-1/2" (596.90 mm) minimum depth
K. 22-1/8" (561.97 mm)
L. 1-3/4" (44.45 mm)
M. 16-7/8" (428.62 mm) opening
N. Floor must support 100 lb (45.4 kg)
O. 1-3/4" (44.45 mm)
A. 22" (558.8 mm) mounting cleat opening width
B. 1/4" (6.35 mm)
C. 1-1/16" (26.97 mm)
E 2
Shelf detail showing the deflector vent installed.
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
1/ " (1.57 mm) bit before mounting.16
C
Front view
No oven
B
A
Suggested electrical
outlet location Anti-Tip block
3/ "4 (19.05 mm)
shelf
Side view
1 3/ " (44.45 mm)4
front face of shelf
Front face of cabinet
16 7/ "8
(428.62 mm)
flush opening
height
Move oven location
downward for extended
countertops for better
viewing angle. Anti-Tip
block
3. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
4. Carefully guide the drawer into the prepared opening. Avoid
contact with the sides of the cutout opening and also pinching
the cord between the oven and the wall.
5. Slide the drawer all the way back until the mounting anges
touch the cleats mounted in the cabinet opening.
6. Open the drawer. Using the 4 holes on the drawer as a template,
pre drill the cabinet using a 1/16” (1.57 mm) bit. See Figure 4.
Figure 3A
Figure 4
Figure 3B
2. Install deector as shown in Figure 3A.
7. Secure the drawer with the 4 screws supplied.
Mounting
flange
Figure 2B
Figure 2C
A. 22-1/8" (561.97 mm) mounting cleat opening width
B. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
ush opening width
C. 3/4" (19.05 mm) shelf
E 3
C
N
H
E
F
D
B
A
J
L
I
cabinet face
shelf face O
G
K
M
Note: the face of the shelf must
sit 1 3/ "4 (44.45 mm) back from
the face of the cabinet.
30" Flush Mount DeFlector Vent: sKMD30F0As
INSTALLATION INSTRUCTION
1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.
CL
Top view
A
B C
Anti-Tip block
Mounting cleat
Drawer face Cabinet
face
Note: the mounting surface of the finished cleat must sit 1
1/ " (26.97 mm)16 back
from the face of the cabinet [pushing the face of the drawer out 1/ " (6.35 mm)4].
Figure 1
Figure 2A
Important notes to the Installer
 • Read all of the Installation Manual that is included with
the Microwave Drawer before installing in the ush mount
conguration.
 • Observe all governing codes, ordinances, and safety
instructions.
 •Be sure to leave these instructions with the consumer.
Parts includes:
Qty. Part number
1
PREF-B020MRP0
Flush Mount
Deector Vent
2LX-CZB055MRE0
Mounting screws
A. 6" (152.40 mm)
B. Suggested electrical outlet location
C. Anti-Tip block
D. 5" (127 mm)
E. 3-1/2" (88.90 mm)
F. 4" (101.60 mm)
G. 30-5/16" (769.92 mm) minimum
30-5/8" (777.87 mm) maximum
H. 14-13/16" (376.24 mm) to bottom of
Anti-Tip block
I. 1-1/16" (26.97 mm)
J. 23-1/2" (596.90 mm) minimum depth
K. 28-7/16" (722.3 mm)
L. 1-3/4" (44.45 mm)
M. 16-7/8" (428.62 mm) opening
N. Floor must support 100 lb (45.4 kg)
O. 1-3/4" (44.45 mm)
A. 28-1/2" (723.9 mm) mounting cleat opening width
B. 1/4" (6.35 mm)
C. 1-1/16" (26.97 mm)

Termékspecifikációk

Márka: Sharp
Kategória: Magnetron
Modell: SKMD30F0AS

Szüksége van segítségre?

Ha segítségre van szüksége Sharp SKMD30F0AS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Magnetron Sharp

Sharp

Sharp R-3A56B Útmutató

12 Január 2025
Sharp

Sharp AX-1500JS Útmutató

6 Január 2025
Sharp

Sharp SMC2265KS Útmutató

24 December 2024
Sharp

Sharp R-334W Útmutató

15 Október 2024
Sharp

Sharp R-2V11B Útmutató

13 Október 2024
Sharp

Sharp R-939IN Útmutató

11 Október 2024
Sharp

Sharp R-875 Útmutató

10 Október 2024
Sharp

Sharp R-930AK Útmutató

8 Október 2024
Sharp

Sharp R-24AT Útmutató

4 Október 2024
Sharp

Sharp R-200(W)E Útmutató

2 Október 2024

Útmutatók Magnetron

Legújabb útmutatók Magnetron

Creda

Creda 29032 Útmutató

4 Április 2025
Baumatic

Baumatic BMC460BGL Útmutató

3 Április 2025
Superior

Superior 17MG53V Útmutató

2 Április 2025
Ambiano

Ambiano MD18547 Útmutató

1 Április 2025
Whirlpool

Whirlpool AMW 518 IX Útmutató

1 Április 2025
Junker

Junker JM16GA52 Útmutató

1 Április 2025
Friac

Friac MC2802C Útmutató

1 Április 2025
Taurus

Taurus Elegance Grill Útmutató

1 Április 2025
Moris

Moris B6127MW Útmutató

1 Április 2025
Smeg

Smeg FMIA120B3 Útmutató

1 Április 2025