Használati útmutató Sharp 50BL3KA

Sharp televízió 50BL3KA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sharp 50BL3KA (91 oldal) a televízió kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/91

Operating Instructions

Andr TV Operation Manualoid

BI, BL, CI, DI, DL & FI Series

Image for illustration purposes only. Actual product may vary.

SHA/MAN/0488

Manufacturers Guarantee

IMPORTANT GUARANTEE INFORMATION

Thank you for purchasing this television. We hope you have many years of trouble free

enjoyment from your purchase.

Your product is covered under the manufacturers’ guarantee for 12 months from the date

of purchase.

If you experience any difﬁ culties with your TV, please refer to the ‘Frequently asked questions’ section

at the rear of these Operating Instructions.

If you are still unable to remedy the issue, try resetting the TV to factory settings - details can be found in

the menu section of these Operating Instructions - alternatively, please contact the helpline.‘Settings’

In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home

or work address, return it to our service centre, repair the item and then return it to you.

If we believe we cannot offer a permanent repair, we will replace the item.

Technical Support Information

Telephone UK 0330 024 0803, ROI 01443 3323

Web support: www.umc-uk.co.uk

Email: service@umc-uk.co.uk

Calls to 0330 numbers are charged at standard call rates and are included as part

of any bundled minutes with your phone provider.

The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.

UK: Calls are charged at your normal telephone call rate.

ROI: Calls are charged at a local rate.

Please retain all packaging materials, in addition to your proof of purchase/receipt,

as you will need these in the event of warranty/service support.

This guarantee is in addition to and does not affect your statutory rights.

If you need to call the helpline, you will need the following information.

1) Model No ______________________________________ (You can ﬁ nd this on the rear of the TV)

2) Date of purchase ______________________________________ (You can ﬁ nd this on your sales receipt)

3) Serial Number ______________________________________ (You can ﬁ nd this on the rear of the TV)

EXAMPLE OF LABEL ON REAR OF TV

This TV set is for domestic use only

Model No

Serial No.

Important Safety Instructions

To prevent spread of ﬁ re,

keep candles or other open

ﬂ ames away from this product

at all times

Please read these instructions. All of the

safety and operating instructions should

be read before the appliance

is operated.

Warnings

• Television sets with 40” screens or larger must be lifted

and carried by at least 2 people.

• This television does not contain any parts that are

serviceable by the user. In the event of a fault, contact the

manufacturer or authorised service department.

• Exposing the internal parts of the TV may endanger

your life. The manufacturers guarantee does not extend to

faults caused by repairs carried out by unauthorised third

parties.

• Do not use the TV set immediately after unpacking.

Wait until the TV warms up to room temperature before

using it.

• To reduce the risk of ﬁ re, electric shock or damage to

the TV, do not expose it to dust, rain or moisture. Never

expose the TV to dripping or splashing and do not place

objects ﬁ lled with liquids on or near the TV.

• Do not connect any external devices (DVD player, games

console etc.) when the TV is switched on. Disconnect both

the TV and device from the mains before connecting.

Only switch appliances on when the connection process is

complete.

• Do not place the television in a conﬁ ned space and do

not obstruct the ventilation openings at the rear of the

television.

• When installing on a wall, ensure the TV is at

least 5cm from the wall for ventilation.

• Always ensure that the TV’s ventilation openings

are not covered with items such as newspapers, table-

cloths, curtains, etc.

• Dispose of this television and any components including

batteries in an environmentally friendly manner. If in

doubt, please contact your local authority for details of

recycling.

• Ensure this TV is used in moderate climates only.

• In cases of electrostatic discharge (ESD) the TV may

operate incorrectly. If this happens, turn the set off at the

mains and then turn back on again after 30 seconds. The

set should now work normally.

WARNING: Never place a television set on an

unstable surface. The TV set may fall causing serious

personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple

precautions such as:

• Use cabinets or stands recommended by the

manufacturer of the television set.

• Only use furniture that can safely support the television

set.

• Ensure the television set is not overhanging the edge of

the supporting furniture.

• Do not place the television set on tall furniture

(for example, cupboards or bookcases) without anchoring

both the furniture and the television

set to a suitable support.

• Do not place the television set on cloth or other

materials that may be located between the television set

and supporting furniture.

• For maximum safety while using your set, it is

recommended to ﬁ t anti-tip straps. These are designed to

be attached between the wall/secure surface and the VESA

mounts on the television. These are available from major

retailers and websites and are an easy and inexpensive

way of ensuring that your set stays safely upright.

• Please educate children about the dangers of climbing

on furniture to reach the television set or its controls.

• If your existing television set is being retained and

relocated, the same considerations as above should be

applied.

Safety

• For your safety, this appliance is ﬁ tted with a fused

3 pin mains plug. Should the fuse need to be replaced,

ensure that any replacement is of the same amperage and

approved with the BSI mark.

• Never try and replace the mains plug unless you have

adequate qualiﬁ cations and are legally authorised to do

so. In the event that a replacement mains cable is required,

contact the manufacturer for a suitable replacement.

• Never use the television if it is damaged in any way.

• Always place the television on a ﬂ at level surface

avoiding anywhere which may be subject to

strong vibration.

• The ideal distance to watch the television is from

approximately 2.5-3 times the length of the diagonal

measurements of the TV screen away.

• Ensure the television is not placed on top of the power

cable as the weight of the television may damage the

cable and cause a safety hazard.

• Never place mobile phones, speakers or any other

device which may cause magnetic or radio interference,

near the television. If interference is apparent, move the

device causing the interference away from the television.

• To disconnect the set from the mains, remove the mains

plug from the socket.

• Ensure that the mains plug is always easily accessible.

• When handling the set do not grip the LCD screen/glass.

• Do not pull the set when mounted on a bracket. If

using a moveable bracket, adjust via the bracket and not

the TV set.

• Do not place this set above a heat source.

WARNING: Excessive volume when using earphones

and headphones can cause damage to hearing.

Important Safety Instructions

Maintenance

• To clean your TV, wipe with a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth dampened

with a weak detergent solution.

• Never use alcohol, paint thinner or benzene to

clean this unit.

• Before using a chemically treated cloth, read the

instructions that came with the cloth carefully.

CAUTION: If water or other liquid enters the

television through the display panel surface,

a malfunction may occur.

Packaging

• The safest way to transport your item is in the

original box/packaging - please save your packaging

for this.

• You will need the original box/packaging in the

event of warranty/service repair or support. We are

unable to carry out warranty/service if you are unable

to package the item correctly.

Important information regarding use of video

games, computers, captions or other  xed image

displays

The extended use of  xed image program material can

cause a permanent “shadow image” on the LCD/LED panel,

also known as “screen burn”.

This “shadow image” can appear in the background during

normal viewing. This type of irreversible LCD/LED panel

deterioration can be limited by observing the following

steps:

1. Reduce the brightness/contrast setting to a minimum

suitable viewing level.

2. Do not display the  xed image for extended periods

of time.

3. Turn the power off when not in use.

Examples of images that are more likely to cause “screen

burn” are as follows (this is not an exhaustive list):

• TV channel logos: e.g. shopping channel logos and

pricing displays - especially if they are bright and stationary.

Moving or low-contrast graphics are less likely to cause

ageing of the screen.

• Time displays.

• Teletext: Do not view a static page for a long period of

time

• TV/DVD menus: e.g. listings of DVD disc content.

• Pause mode: Do not leave the TV in pause mode

for long periods of time, e.g. when watching DVDs

or videos.

Important: Once ‘shadow image/screen burn’

occurs, it will never disappear and is not

repairable under warranty.

How do I dispose of this product?

UK: Waste electrical products should not

be disposed of with household waste.

Please dispose of the product at a

designated collection point for recycling

of WEEE. For your nearest facilities, please

see www.recycle-more.co.uk or ask store

for details.

ROI: Waste electrical products should not

be disposed of with household waste.

Separate disposal facilities exist. Check with

your local authority or retailer for recycling

advice.

Batteries

• Do not expose batteries to high temperatures, excessive

heat, prolonged sunshine or  re as this may cause leakage,

explosion or ignition.

Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix

old and new batteries.

• Dispose of batteries in an environmentally

friendly way.

• Certain regions may regulate the disposal of batteries.

Please consult your local authority.

CE Statement:

Hereby, UMC Poland sp. z o.o. declares that this LED

TV is in compliance with the essential requirements

and other relevant provisions of

RED Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available by following the link:

www.umc-poland.com/declaration-of-conformity/

This equipment may be operated in all EU countries

Wi-Fi max transmitter power:

100 mW at 2.412 GHz - 2.472 GHz

Trademarks

Microsoft PlayReady™

For DTS patents, see http://patents.dts.com. Manufactured

under license from DTS Licensing Limited. DTS, the Symbol, DTS

and the Symbol together, DTS-HD, and the DTS-HD logo are reg-

istered trademarks and/or trademarks of DTS, Inc. in the United

The Ultra HD Display logo is registered trademark of DIGITAL-

EUROPE

The DVB logo is the registered trademark of the Digital Video

Broadcasting (DVB) project.

The FREEVIEW text and logos are trademarks of DTV Services

LTD. © DTV Services Ltd

SAORVIEW is a registered trademark owned by RTÉ.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio and the double-D symbol are trademarks of

Dolby Laboratories.

The “CI plus” Logo is a trademark of CI Plus LLP.

YouTube and the YouTube logo are trademarks of

Google Inc.

The Wi-Fi CERTIFIED Logo and Miracast® are registered

trademarks of Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™ is a

trademark of Wi-Fi Alliance.

For DTS patents, see http://patents.dts.com. Manufactured

under license from DTS Licensing Limited. DTS, the Symbol,

DTS and the Symbol together, Virtual:X, and the DTS Virtual:X

logo are registered trademarks and/or trademarks of DTS, Inc. in

the United States and/or other countries. © DTS, Inc. All Rights

Reserved.

The Bluetooth® word mark and logos are registered

trademarks owned by bluetooth SIG,. Inc.

This product contains technology subject to certain

intellectual property rights of Microsoft. Use or

distribution of this technology outside of this product

is prohibited without the appropriate license(s) from

Microsoft.

Content owners use Microsoft PlayReady™ content

access technology to protect their intellectual property,

including copyrighted content. This device uses

PlayReady technology to access PlayReady-protected

content and/or WMDRM-protected content. If the

device fails to properly enforce restrictions on content

usage, content owners may require Microsoft to revoke

the device’s ability to consume PlayReady-protected

content. Revocation should not a ect unprotected

content or content protected by other content access

technologies. Content owners may require you to

upgrade PlayReady to access their content. If you

decline an upgrade, you will not be able to access

content that requires the upgrade.

Not all trademarks may apply to the model this manual is shipped with

CONTENTS

Guarentee Information . . . . . . . . . . . . . . . . . . . . . . . . . .3

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Wall Mounting and Set Security . . . . . . . . . . . . . . . . . . .8

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Set Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Operation Manual Navigation Hints . . . . . . . . . . . . . .10

Connecting External Device - Wired & non wired . . .11-19

Connecting Headphones - Wired & non wired . . . . . .19

Playing Content stored on a USB Device . . . . . . . . . . .20

Inputting Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

First Time Installation . . . . . . . . . . . . . . . . . . . . . . . . . .23-27

ANDROID FUNCTIONALITY . . . . . . . . . . . . . . . . . . . . . . .28

introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

The Google Assistant . . . . . . . . . . . . . . . . . . . . . . . . . .29-30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-38Home Page

Inputs, Google Assistant, Network,

noti cations and settings . . . . . . . . . . . . . . . . . . . . .31

Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-34

Memory Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Play Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37-38

Television Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-67

Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

CI Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Network & Internet . . . . . . . . . . . . . . . . . . . . . . . .45-46

Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-50

Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . .51

Accounts & Sign-in . . . . . . . . . . . . . . . . . . . . . . . . .52

Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Device Preferences . . . . . . . . . . . . . . . . . . . . . . . . .54

About TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-61

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Store Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Google Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Chromecast Android Shell . . . . . . . . . . . . . . . . . . .64

Screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Usage & Diagnostics . . . . . . . . . . . . . . . . . . . . . . . .65

Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Reset to Factory Settings . . . . . . . . . . . . . . . . . . . .66

Remotes & Accessories . . . . . . . . . . . . . . . . . . . . . .67

DIGITAL TELEVISION, FREEVIEW & FREEVIEW PLAY . . . .68

Tuning in Digital Channels . . . . . . . . . . . . . . . . . . . . . .68-69

Using Freeview Play . . . . . . . . . . . . . . . . . . . . . . . . . . .70-74

Freeview Play App . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Information Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

MENU STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

UPDATING SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . .79

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-85

Video Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-81

Audio Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-84

Image Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . .86-90

Fitting Wall Bracket Spacers

SECURING THE TV TO A WALL

Securing the TV to a wall with anti-tip straps

For maximum safety in the home, when using a TV with its stand, anti-tip straps should be ﬁ tted. These

are available from major retailers & websites and are an easy, inexpensive and effective way of ensuring

your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to

the wall or furniture the TV is stood on, these are ﬁ tted as follows.

A) Using one or both of the top wall-mounting

holes and screws fasten one end of the fastening

cord/s to the TV. (the screws are already supplied in

the wall mounting holes)

B) Secure the other end of the fastening cord/s to

your wall. (you will need screws/ﬁ xings suitable

for your wall type - available separately from most

DIY stores).

Note: Please ensure that children do not climb on the TV set.

Note: When handling the set do not grip the LCD Panel.

Note: Do not pull the set when mounted on a bracket. If using a moveable bracket, adjust via the bracket and not the set.

The Royal Society for the Prevention of Accidents is urging people to take care with ﬂ at-screen televisions.

RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling ﬂ at-screen televisions on to

themselves. They are unsteady on their feet and are attracted by colourful television images.”

The risk is increased as televisions become lighter.

Wall mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there

could be any electrical wires, water or gas pipes.

1) Remove the four screws located at the back of the TV set.

2) The wall mount can now be easily attached to the mounting holes,

located on the back of the TV, using the same four screws removed.

Important: If wall mounting this TV, only use the screws already provided in the wall mounting holes.

Using other screws which are longer could cause irreparable damage to the internal parts. When using

a wall bracket, please ensure the screws in the back of the TV set are not over tightened.

ﬁg 1 ﬁg 2

Viewing angle

INCORRECT CORRECT

Note:

This diagram to the left is an example of screw positions. Due to model variations,

please ensure you check your TV for the exact location of the wall mounting screw

positions.

Getting Started

CONNECTING EXTERNAL DEVICES  WIRED

Before turning your set on, it is recommended that your external devices are connected before continuing

with the ﬁ rst-time installation process. Depending on the source connectivity on your television, follow

the guidance below when connecting external devices.

HDMI Connection

For optimum picture quality, we recommend connecting your device to the television using an HDMI

cable.

(A)

(B)

HDMI HDMI

(A) External Device

(B) HDMI cable (not supplied) *

*Be sure to use an authorised HIGH-SPEED HDMI cable bearing the HDMI logo.

HDMI CEC-Compatible Devices

If an HDMI CEC-compatible device (e.g., Blu-ray player, AV receiver) is connected with an HDMI cable,

you can operate the device with the televisions remote control. We recommend using the HDMI (ARC)

connection when used with an AV receiver – please refer to the ARC section of this Operation Manual.

Adjusting HDMI CEC Settings

1. Turn on the connected device.

2. To enable HDMI control, press the [HOME] button, then select Settings > Device Preferences >

Inputs.

3. Activate HDMI control on the connected device.

HDMI control Allow the TV to control HDMI devices

Device auto power

off

If disabled, the connected device does not turn off automatically when

the television is turned off.

Television auto power

If disabled, the television does not turn on automatically when the

connected device is turned on.

CEC Device list Displays the HDMI CEC device list.

Available options

Features Available to Compatible CEC Devices

Blu-ray/DVD player

• Automatically turns the television on and switches the input to the connected Blu-ray/DVD player when

the Blu-ray/DVD player starts to play.

• Automatically turns the connected Blu-ray/DVD player off when you turn the television off.

• Controls menu operation [ARROW] buttons, playback and track selection of the connected Blu-ray/DVD

player through the TV’s remote control.

AV Receiver

• Automatically turns the connected AV receiver on and switches the sound output from the TV speaker

to the audio system when you turn the TV on. This function is only available if you have previously used

the AV receiver to output the TV’s sound.

• Automatically switches the sound output to the AV receiver by turning the AV receiver on when the

TV is turned on.

• Automatically turns the connected AV receiver off when you turn the TV off.

• Adjust the volume and mute functions via the [VOL+/–] and [MUTE] buttons on your television remote

control

Video Camera

• Automatically turns the TV on and switches the input to the connected video camera when the camera

is turned on.

• Automatically turns the connected video camera off when you turn the TV off.

• Controls menu operation [ARROW] buttons, playback, e.g. [PLAY] button of the connected video

camera through the TV’s remote control.

Note: Not all devices with HDMI input/output are HDMI CEC compatible. For information about CEC

compatibility, refer to the instruction manual of the device.

Refer to “HDMI connection (ARC supported)” section of this manual for information relating to connecting

an HDMI (ARC) enabled device.

Getting Started

Component video Connection

If your external device has component video jacks/sockets, connect them to the television using a

component video cable and an audio cable. There are two ways of doing this:

(A)

RCA (phono) Cables

(B)

(C)

Video / Y

Mini YPbPr and AV Source

(A)

(C)

(E)

(B)

(D)

(A) External Device

(B) Audio cable (not supplied)

AV in

YPbPr

Getting Started

(A) External Device

(B) Composite video/audio adapter cable (not supplied)

(D) Component video adapter cable (not supplied)

(E) Component video cable (not supplied)

Component video Connection

If your external device has composite jacks/sockets, connect them to the television using a composite

video/audio cable. There are two ways of doing this.

RCA (phono) Cables

Video / Y

Video CVBS

(A)

(B)

Mini AV Source

(A)

AV in

(B)(C)

(A)

(B)

(C)

External Device

Composite video/audio adapter cable (not supplied)

(A)

(B)

External Device

Composite video/audio cable (not supplied)

Video CVBS

Getting Started

USB Devices (wired)

You can connect wired USB devices such a mouse and keyboard via the USB sockets on the rear of the set.

Getting Started

Note: We are unable to guarantee connection of a wired USB device. Use of USB hubs is not

recommended

Connecting an External Audio Device

You can connect audio systems such as AV receivers or sound bars to the television. Select a connection

method below according to the speciﬁ cations of the audio system you want to connect.

• Connecting with an HDMI cable. for Details, carefully read

HDMI Connection (ARC supported)

• Connecting with a digital optical cable.

• Connecting with an audio cable

For connection methods, refer to the

Connecting an Audio System

section

HDMI Connection (ARC Supported)

Connecting the television and audio system with an HDMI cable. This is the recommended method of

connecting an external audio device

Connect to the television’s HDMI input terminal bearing the text “ARC”

(A)

(B)

HDMI (ARC) HDMI (ARC)

(A)

(B)

AV Receiver or Soundbar

HDMI cable (not supplied)*

Ensure that the connected audio device is HDMI ARC compatible.

The ARC output on your television may vary depending on the model.

HDMI CEC must be enabled on your set for this connection to work. To do this press the [HOME]

button, then select Settings > Device Preferences > Inputs and then enable the HDMI control option.

Control of volume can be achieved via the television remote control (CEC must be turned on).

When ARC is working, the sound from the television speakers will be muted.

You need to conﬁ gure the Digital Output settings according to your audio system. Press the [HOME]

button, then select Settings > Device Preferences > Sound > Digital Output.

If the audio system is not compatible with Dolby Digital or DTS, set Settings > Device Preferences > Sound

> Digital Output to PCM.

Getting Started

Note: Refer to the instruction manual of the device to be connected.

Note: We recommend authorised Premium High-Speed HDMI Cable(s) bearing the HDMI logo.

HDMI Connection (ARC Supported)

Connecting your television and audio system with a digital optical cable.

Connect to the audio system digital optical input terminal.

(A)

(B)

Digital Audio Out

Optical

Digital Audio In

Optical

(A)

(B)

AV Receiver or Soundbar

Audio Optical cable (not supplied)

If there is no output on the digital optical output, ensure that the digital output is set to PCM.

set Settings > Device Preferences > Sound > Digital Output to PCM.

The digital optical output is always present whatever source is selected.

RCA Analogue Audio Cable

Connect to the audio system’s audio input terminal.

(A)

Audio L/R

Earphone

(B)

(A)

(B)

AV Receiver or Soundbar

Audio cable (not supplied)*

Getting Started

Note: When connected via the digital optical output, it is necessary to turn off the sets internal

speakers to prevent any echo effects. To do this go to Speakers >- External Audio System and

turn this on. This will disable the sets internal speakers.

Note: The output audio level is dependent upon the headphone level. The volume level on the connected

audio system must be turned up.

It is possible to connect external non-wired devices such as Bluetooth headphones, keyboard, mouse, etc

CONNECTING EXTERNAL DEVICES -

NON WIRED

Chromecast built-in

Chromecast built-in allows you to wirelessly cast content from your favourite websites and apps to your

television, directly from your computer or mobile device.

1. Connect a mobile device such as a smartphone or table to the same home network that the

television is connected to

2. Launch a Chromecast supoorted app on the mobile device.

3. Select the (cast) icon in the app

The screen of the mobile device is displayed on the television.

Bluetooth Devices

The Bluetooth function can be used to pair the television with various devices. You can pair audio output

devices such as Bluetooth soundbars, speakers or headphones. Supported input devices are Bluetooth

remote controls, gamepads, computer mouse etc.

To pair the television with a Bluetooth device, follow the instructions below:

1. Turn the Bluetooth device on and put it in pairing mode.

2. To put your Bluetooth device in pairing mode, refer to the instruction manual of the device.

3. Press the [HOME] button, then select Settings > Remotes & Accessories > Add Accessory to put the

television in pairing mode

4. A list of available Bluetooth devices will be displayed.

5. Select the desired device from the list, then follow the on-screen instructions.

6. If you are prompted to enter a passcode, refer to the instruction manual of the device.

7. After pairing is completed, your device will be connected to the television.

Getting Started

Note: An Internet connection is required to use Chromecast built-in. Both your television and device need

to be connected to the same network for the casting function to operate.

There are many Chromecast apps available for mobile and other devices.

Connecting Headphones

You can connect wired or Bluetooth headphones to this set.

Earphone

When

wired headphones

are connected to the 3.5mm jack socket on the rear of the set, the internal

speakers will cut out. The volume of the sound which comes from the headphones is controlled via the

remote control using the [VOL+] and [VOL-] buttons.

When a

Bluetooth device

is paired with the set, the internal speakers will cut out. The volume of the

sound that which comes from the Bluetooth device is adjusted via the remote control using the [VOL+]

and [VOL-] buttons. If headphones are connected to the 3.5mm jack on the rear of the set, the Bluetooth

device takes over the sound output, i.e. if both wired and Bluetooth headphones are connected, there will

only be sound from the Bluetooth headphones.

Volume bar display

When the volume is changed on your television set, the volume bar will come up at the bottom of the

screen. If Bluetooth is being used, the bluetooth icon will be displayed.

When the audio is muted, the volume bar will display the last set volume and also the mute icon.

Note: When using headphones, a warning will appear advising not to use excessive volume for long

periods of time as this may damage your hearing.

Turning up the headphone volume too high may result in distortion.

Getting Started

To unpair your remote control, follow the instructions below:

1. Go to Settings > Remotes & Accessories.

2. Select the remote control to be unpaired and press [OK].

3. Now select “Unpair” and press [OK].

4. Select “OK” and press [OK] on the remote control.

5. Your remote control will now unpair from the set.

PLAYING CONTENT STORED ON A USB

DEVICE

Chromecast built-in

Connect a USB storage device to the USB port of the television to enjoy photo, music, and video ﬁ les

stored on the device.

Connect the USB device to your television and turn it on.

1. Press the [HOME] button, select from the Home Page, and select the DigitalMediaPlayer from

the app list.

2. If the supplied remote control has an APPS button, you can press the APPS button to display the app

list.

3. Browse the list of folders and ﬁ les and select the desired ﬁ le.

4. Press [OK] and playback will start.

Getting Started

Notes: Depending on the image dimension, ﬁ le size, and number of ﬁ les in a folder, some photo

images or folders take time to display.

Displaying the contents of the USB device may take some time depending on the content.

While accessing the USB device, do not disconnect power from the television or USB device as

the data may be corrupted.

Depending on the ﬁ le, playback may not be possible, refer to

USB and DNLA Speciﬁ cations.

Some photos and movies may be magniﬁ ed, resulting in low picture quality. Depending on the

size and aspect ratio, images may not be displayed in full screen.

It may take a long time to display a photo, depending on the ﬁ le or settings.

If DigitalMediaPlayer cannot be found in the favourite’s apps, you can add it from the apps

listing.

The USB ports on the television support FAT32 and NTFS ﬁ le systems.

If your digital still camera does not work with your television, try the following:

• Set the USB connection settings on your camera to Mass Storage.

• Copy the ﬁ les from the camera to a USB ﬂ ash drive, then connect the drive to the

television.

INPUTTING TEXT

On -Screen Keyboard

There is a preinstalled on-screen keyboard app in your set which will appear whenever text is expected

to be entered by the user, e.g. Wi-Fi password or website address in the web browser. To navigate the

on-screen keyboard, use the [ARROW] buttons on the remote control, enter the character selected by

pressing [OK].

If you press and hold the [OK] button for 2 seconds while on a selected symbol, this will display the

associated national character(s) with accents or diacritical marks.

Using the Remote Control

You can operate many of the televisions features by using the [UP], [DOWN], [LEFT], [RIGHT] and [OK]

buttons on the remote control.

The following remote control buttons are used to navigate the menus:

•

[EXIT]

: Exits from the menu and returns to the source or Home Page.

•

[BACK]

: Takes you one step back in the menu.

•

[ARROW BUTTONS]

: Navigate around the options on the screen.

•

[OK]

: Selects the option highlighted or selected.

Your set can also be voice controlled using Google Assist.

Getting Started

Note: When entering the Wi-Fi password this keyboard is extended to show all characters at once.

FIRST TIME INSTALLATION

When the set starts up for the ﬁ rst time, it will do so in the ﬁ rst-time installation mode. This enables you

to set up various Android functions, log into your Google account (you will be able to set up a Google

account if you do not have one) and for the set to be tuned into digital television if required.

MENU INFO

BACK EXIT

Press to navigate up

Press to conﬁ rm a selection

Press to navigate right

Press to navigate left

Press to navigate down

To navigate through the options when in the ﬁ rst-time installation mode, use the buttons on your

remote control as shown here:

Using the Remote Control

During the set-up process you will be prompted to sign into your Google account via the pre-installed

Google app. This set up process will depend upon the model of television being conﬁ gured. Please ensure

that you have your account details to hand. If not, you will be prompted to set up an account. If you do

not wish to set up an account, this can be done later.

Getting Started

Note: The basic installation steps may vary slightly depending on your model and/or country of use.

Due to Android software updates, the look and feel of the television start up procedure and

subsequent menus may be subject to change.

TV Control Stick

The TV control stick is located on the back of the TV, on the right hand side. The control stick can be used

to control a variety of TV functions. The shape of the TV’s control stick may vary by model.

While the TV is in standby mode:

1. Pressing the centre of the control stick once powers on the TV set.

While watching TV:

1. RIGHT/LEFT – volume up/volume down

2. UP/DOWN – changes channel up/down

3. Press the centre of the control stick once – displays the menu

4. Press and hold the centre of the control stick – Standby/Power Off

While in menu:

1. RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus

2. Press the centre of the control stick once – OK/Conﬁ rm selected item

3. Press and hold the centre of the control stick – back to previous menu

Full First Time Installation

When the set is turned on for the ﬁ rst time it will enter the installation mode as shown here. It is

recommended that all steps are completed as shown in the process to ensure correct operation. Use the

back button on your remote control to return to the previous screen.

1. When the set ﬁ rst turns on, you will be

requested to select your preferred on-screen

display language. This will set the language

in which the menus and associated

information is displayed in. Should you wish

to do so, this can be changed later in the

Device Preferences menu.

2. Next you will be requested to set up your

set with an Android phone. If you do not

have an Android phone, proceed to the

next step.If chosen, the set will request you

to log into your Android phone and connect

the set to your network automatically.

3. If your set is not connected via an Ethernet

cable, it will request that a Wi-Fi network

is selected and logged into. Choose your

network and then follow the on-screen

display to enter your password. When

correctly entered, the set will log into your

network and connect to the internet if this

is available.

4. Now you can sign in using your Google

account. If you do not have a Google

account, this can be set up at this stage if

required. Should you not want to sign in or

create a Google account, then this stage can

be skipped.

5. If signing in, there are two options. You can

either sign in using a device by choosing

“Use your phone or computer”, this will

bring up further options to follow. If using

the remote control to sign in, you will be

asked for your Google account name and

password; follow the prompts to sign in.

Getting Started

6. Once logged into your Google account

you will be asked to conﬁ rm that the

to accept the following:

7. Help Improve Android - When enabled,

the set will automatically send diagnostic

information to Google.

Location: Let Google use your device

location to improve your Android device.

Some apps may require this to be turned

on to perform correctly. This setting can be

turned on or off at any time in the Settings

menu.

Get Personal Results: Turn this on so that

you can use your voice to get your email,

calendar, help with payments and more on

this device. This can be turned on or off in

Assistants settings.

8. After setting up your Google functionality,

some of the beneﬁ ts and advantages of the

set are displayed.

9. Enter the country of use for the set. This will

determin the functionality of the television,

for example Freeview Play in the UK or

Saorview in ROI.

10. When this prompt appears, press the [OK]

button on the remote control to enter a

four digit PIN code. You will be asked to

conﬁ rm the PIN before progressing to the

next step. This PIN is used when accessing

various functions on the set and during the

lock or parental control usage.

Note: When setting the password, you can only set four numbers. The letters on the displayed keyboard are

not active.

Getting Started

11. Set up your television to be in Home or

Store mode. Home mode is the default

setting for normal use. This can be changed

later in the Settings menu if necessary.

12. To enable your set to receive television

channels, it needs to be tuned into your

local transmitter. There are three tuning

modes available, for Freeview Play

functionality choose Antenna and then the

Scan option. While your set is tuning in, the

display will advise progress and the number

of digital channels received.

13. Tuning of the set is now complete.

14. Agree to the Freeview Play Terms and

Conditions if the set is located in the UK and

tuned in.

Getting Started

Note: If the store mode is turned on, the set will

go into the demonstration mode after a few

minutes and display banners advising of the sets

speciﬁ cation on the screen.

15. Connect your remote control using

Bluetooth:

• Press and hold the [LEFT ARROW] and

[HOME] buttons on the remote control at

the same time.

• The LED indicator on the remote control

will start to ﬂ ash.

• Select your remote control from the list

shown on the television screen and press

[OK] on the remote control.

• Once paired, the pairing screen will

disappear.

16. You will be greeted by a Freeview Play

conﬁ rmation screen, when this closes, you

are ready to use your Android set. Your set

will start at the Android Home Page.

HOME

M ENU INFO

Left Home

Getting Started

Note: If your set is not supplied with a bluetooth

remote, then it will not pair with the set. If this

is the case, this step has to be skipped.

ANDROID FUNCTIONALITY

Your Android set is able to provide many functions and the usage of some of these are shown below.

Viewing internet Media

You can use video streaming services such as YouTube and Netﬂ ix to watch content via your internet

service. The services available will vary depending on your country and region. You can launch these

services by selecting their titles on the Home Page.

Note: An Internet connection is required to watch content.

Some streaming services may require an account or subscription.

Enjoying Safe Apps and Video Streaming Services (Security & Restrictions)

You can ensure safe use of the television by setting installation restrictions on apps that are downloaded

from unknown sources, or age restrictions on programmes and videos. You can access parental controls by

pressing the [HOME] button, then select Settings > then options such as Apps > Security & restrictions or

Settings > Channel > Parental Controls.

If you change the Security & Restrictions settings, your device and personal data are more vulnerable to

attack by unknown apps from sources other than Play Store. Any third party apps are downloaded at the

risk of the user, any damage to your device or loss of data that may result from using these apps is not

covered by the manufacturer.

Android Functionality

Note: Other separate restrictions may be available depending on the app. For details, refer to the

app’s help pages. It is possible to download a large number of applications to the set and as these are

not part of the software installed on the television, instructions on their usage will have to be provided

by the app producer in most cases.

Using the Google Assistant with Voice

The Google Assistant allows voice commands to quickly ﬁ nd and play your favourite shows, obtain

answers and control your home via connected devices. If you experience issues with third party devices, it

is suggested that you contact the provider of the device for support.

THE GOOGLE ASSISTANT

Remote controls with Google Assistant functionality have a Google Assistant button and a built-

in microphone to allow voice communication with the set. To enable Google Assistant, follow the

instructions below:

1. Press the button on your remote control.

2. The light on the remote control will illuminate.

3. Wait for the on-screen message from the Google Assistant, then speak into the microphone.

HOME

VOL CH

SOURCE

21 3

Microphone

LED indicator

By speaking into the microphone, you can search for various content or control your connected smart

home devices.

Android Functionality

Note: Helpful phrases may be displayed on the television screen depending on your model. If you are

unable to access the Google Assistant, ensure that the remote control which has the button is

paired to the television.

To do this, press the button on the remote and follow the on screen instructions.

Ensure that when speaking into the microphone that the microphone is positioned about 15 to

30cm away from your mouth.

Do not speak too loudly or softly. Ensure words are spoken clearly.

Using the Google Assistant with the On-Screen Keyboard

Press the [HOME] button, then select the icon from the Home Page and press [OK]. The on-screen

keyboard will be displayed, you can now enter your question or command by typing this in.

Using the Google Assistant with the On-Screen Keyboard

If during the ﬁ rst-time installation process the remote was not paired or skipped, then follow the process

below to pair your remote with the television:

HOME

M ENU INFO

Left Home

1. Turn the set on.

2. Go to Settings > Remotes and Accessories.

3. Now press and hold the [LEFT ARROW] and

[HOME] buttons on the remote control at

the same time.

4. The LED indicator on the remote control

will start to ﬂ ash

5. Select your remote control from the list

shown on the television screen and press

[OK] on the remote control.

6. Once paired, the pairing screen will

disappear.

Android Functionality

Note:

• The Google Assistant requires an internet connection.

• The Google Assistant is not available in certain languages and countries.

The type of remote control supplied with the television, and the availability of a remote

control with a built-in microphone varies depending on your model/region/country. An optional remote

control is available.

Note: If the button is pressed on the

remote control and it is not paired, the pairing

screen will appear.

HOME PAGE

To enter the Home Page screen, press the [HOME] button on your remote control. From the Home Page,

you can search for content and select recommendations, apps, and go into settings.

The Home Page is the default viewing screen for your television and it will appear after the ﬁ rst-time

installation process has been completed.

Inputs, Google Assistant, Network, Noti cations and Settings

The picture below shows a typical Home Page, here we look at section as shown inside the dotted line. A

The Google Assistant

- Use the button on on the remote control or the on-screen

keyboard displayed on the television to input keywords and search for various content.

Notiﬁ cations

- Displayed when there are notiﬁ cations such as when there is a connection issue

or software update. The number within the circle indicates the number of notiﬁ cations.

Network

- Conﬁ gure network and internet. This symbol changes depending on the connection

type – Wi-Fi or Ethernet.

Settings

- Conﬁ gure various television related settings.

Android Functionality

Apps and Favourite Apps

Apps are programs and functions which expand the functionality and usage of your television. These can

include video stream viewers, on demand players, games, health monitors and many more types. These

can be added to the set via stores such as the Google Play Store. Apps are shown in section of the Home B

Page.

Moving or Removing an App on the Favourite Bar

Follow the instructions below:

1. Select the app you would like to move or remove from the favourites section.

2. Press the [OK] button on the remote control for more than two seconds.

3. The menu shown on the right will be displayed.

4. Select the desired function by using the [UP/DOWN] buttons on the remote control, then press [OK].

5. If moving the icon, select [LEFT/RIGHT] on the remote control until the app icon is in the desired

position.

Adding More Apps to the Favourites Bar

To add more apps, use the remote control [ARROW] buttons to select the icon and then press [OK].

This will show apps which are available and have been previously downloaded to the set.

You can now select the app which you would like to add to the favourites

bar from the ones which now appear on the screen.

Android Functionality

Note: Some apps cannot be removed from the favourites bar as they are fundamental to the operation

of the set.

Adding More Apps to the Favourites Bar

To enter the App Management screen, select the Apps icon on the left-hand side and

press [OK] on the remote control. The screen shown below will appear.

Note: The apps shown here may differ to your set. These will

depend upon apps installed and downloaded.

It is also possible to move, open and uninstall an app from this menu. Follow the instructions below to

carry out these functions:

1. Select the app you would like to open, move, add to favourites, or uninstall from this section.

2. Press the [OK] button on the remote control for more than two seconds.

3. The menu shown on the right will be displayed.

4. Select the desired function by using the [UP/DOWN] buttons on the remote control, then press [OK].

Android Functionality

Notes: If an app has been uninstalled, you will have to download it again.

Some apps which are fundamental to the operation of the set cannot be uninstalled.

Installing apps from the Google Play Store

You can install apps from the Google Play Store to your television, just like you do

with smartphones and tablets. You can only install apps that are compatible with

this television. They may differ from the apps shown on smartphones/tablets.

An Internet connection and Google account are required to install apps from the Google Play Store. If you

do not have a Google account or wish to create a shared account, this can be achieved during the ﬁ rst

time installation or by accessing the following website on any device:

https://accounts.google.com/signup

The website above may vary depending on your region/country. It is also subject to change without notice.

For details, refer to the Google homepage.

To install an app on your set, press the [HOME] button and select Google Play Store from the apps list. If

the supplied remote control has an [APPS] button, you can press the this to display the apps list. Select an

app to install. After downloading, the app is automatically installed and added. Its icon appears in the list

of installed apps, allowing you to launch it.

To add an app from the Play Store, select and enter the Play Store from the apps section of the Home

Page. When the Play Store opens, you can then select an app to load onto the set from the ones which

appear, or search for a desired app.

Installing apps from the Google Play Store

You can move downloaded apps to a USB memory device or SD card to increase the space available in the

television.

Android Functionality

Notes: There are free apps and paid apps in the Google Play Store. To purchase a paid app, a prepaid

Google Play gift card code or credit card information is required. You can purchase a Google

Play gift card from various retailers.

Free space on internal storage of the television is limited. When storage is full, it will not be possible to

install more apps. To check how much free space is available go to:

Settings > Device Preferences > Storage.

If internal storage is full and you wish to install additional apps, you will have to delete some

currently installed apps or move apps to USB memory device or SD card. Please refer to the

chapter

Moving apps to a USB memory device or SD card.

Note: When you format a USB memory device/SD card, all data saved in the device will be deleted.

Back up your important data before formatting. Performing this procedure formats the USB

memory device/SD card for exclusive use with the television. Therefore, you may be unable to

use the USB memory device/SD card with a computer, etc.

Some apps cannot be moved to a USB memory device/SD card.

Some apps cannot be moved to a USB memory device as they are fundamental to the

operation of the set.

Formatting Memory Device

Insert SD card or USB memory device to the television, then press the [HOME] button, select :

Settings > Device Preferences > Storage > the desired USB memory device or SD card. Format the selected

memory device as an internal storage device.

Moving an App to Your Memory Device

Press the [HOME] button, then select Settings > Apps, then select the app that you want to move to the

USB memory device or SD card. Now choose the USB memory device/SD card from the used storage. The

app is moved to the USB memory device/SD card.

Hint: Repeat steps above to move additional apps to the USB memory device.

Removing a USB Memory Device

Press the [HOME] button, select Settings > Device Preferences > Storage > the desired USB memory device,

then select the option to remove it.

Android Functionality

Note: Your Android TV formats the USB memory desivce/SD card into a proprietary format. When

inserting the USB memory device/SD card into a personal computer after adding apps to it, you will not

be able to view the contents of the USB memory device/SD card.

To use the USB memory device/SD card on a personal computer, you will need to

reformat the devices which will erase any data stored on the USB memory device/SD card.

Note: The USB memory device is used only for saving apps. To use the USB memory device for other

purposes, you must format it again.

If you delete an app in the USB memory device using a computer, you will be unable to launch

it from the television.

If you remove a USB memory device from the television, you will be unable to use the apps that

were moved to the USB memory device.

You cannot specify a USB memory device as the installation location of an app. First install the

app on the television as normal, and then move it to the USB memory device.

Depending on the television model, your set will be equipped with either an SD card slot or a Micro SD

card slot. Please ensure you use the correct type of SD card, corresponding to the available slot.

Play Next

Play Next functionality is shown in section . This option is only displayed when the Play Next option is C

active and there is content in the Play Next list.

Play Next option can be selected when in a streaming app such as You Tube. To do this:

1. Select the item in the Channels list on the Home Page to be added to the Play Next list.

2. Press and hold the [OK] button on the remote control for more than two seconds.

3. The Play Next option appears.

4. Select “Add to Play Next”.

5. Stream will now appear in the Play Next list.

The Play Next option can be turned on and off in the Customize

channels option on the Home Page. In addition, the services which

can be used on Play Next can also be turned on and off. In the case

of the Freeview on demand players it is also possible to restrict

channels and genre.

Android Functionality

Note: Once a stream has been played back, it will

disappear from the Play Next list.

If there are no streams in the Play Next list, the list will

not be seen on the Home Page.

Channels

Channels are services which have been added to your Home Page which enable you to view streaming

services, see section D. You can add, remove and modify channels via the “Customise channels” option.

Moving a Channel

It is possible to move a channel up and down in the list, the position of a channel is your preference.

1. Select the channel icon.

2. Press the [LEFT] button.

3. Select the move button.

4. Press [OK].

5. Use the [UP/DOWN] buttons to move to the desired position.

6. Use the [RIGHT] button to exit from the operation.

It is possible to move a channel up and down in the list, the position of a channel is your preference.

Deleting a Channel

1. Select the channel icon.

2. Press the [LEFT] button.

3. Select the delete button.

4. Press [OK].

5. Channel is removed from the Home Page list.

Note: Some channels cannot be removed from the channel list.

Android Functionality

Note: The position of some channel cannont be moved.

Customise Channels

In section E you can customise your channels.

The Customise channels function is used to display or hide the

selected channels on the Home Page. This allows for the Home

Page to be less densely populated making it easier to access the

apps and functions most used.

Android Functionality

While in the television menu, you can adjust and change the settings applicable to the various input

sources related to the television mode.

Options are:

Source

Change the picture (input) on your television.

Picture Mode

Change the picture mode.

Display Mode

Change the display mode (aspect ratio) of the picture.

Speakers

Control the speaker output when used with audio devices.

Power

Control the power settings on your television.

CI Card

Activate and set up a connected Conditional Access Module (not

supplied).

Advanced Options

Set up various live TV options.

Settings

Control other televisions settings.

Note: For a more detailed explanation of these options, refer to the sections in the next pages.

When on one of the menu options and the [UP] arrow button is pressed on the remote control, a further

menu option appears as below.

Add to My

Add current channel to favourites.

Favourites

Program Guide

Shortcut to the program guide.

New Channels

This will appear if new channels are available.

Available

Note: The Programme Guide will only appear if the set is tuned into a digital television signal which

supports a program guide function.

TELEVISION MENU

Android Functionality

Source

You can select your desired source from this menu. It is also possible to do this by pressing the [SOURCE]

button on the remote control. The number and type of inputs will depend upon the model and

speciﬁ cations of your set.

This menu provides options to modify picture quality and the following

modes are available:

User

Allows you to change the picture settings to your personal

preference. These settings are saved automatically.

Standard

Standard settings.

Vivid

Enhances picture saturation and sharpness.

Sport

Optimises picture quality for viewing sports.

Movie

Picture has less colour and is darker.

Game

Recommended settings for gaming. The television will turn

off all picture post processing functions to achieve minimal

input delay.

Energy

Power Saving mode, which reduces the energy used by up

Saving

20% (by reducing the power to the LED/LCD panel). In this

mode, the brightness of the picture may be reduced. This is

the default setting on your television.

Picture Mode

Note: Depending on television model, some picture mode options may not be available.

Settings will only be stored in the User mode.

To enter the Picture Mode menu, press the [SOURCE] button and select TV. Then press the [MENU]

button and select Picture Mode using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when

selected.

Android Functionality

Note: You can go directly to the DTV source (if tuned in), but

pressing the numbered buttons on the remote control,

i.e. pressing the number [1] will switch the set to channel 1.

Alternatively, you can press the [TV] button.

Display Mode

To enter the Display Mode menu, press the [SOURCE] button and select TV. Then press the [MENU] button

and select Display Mode using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.

This menu provides options to modify the picture aspect ratio and the following modes are available:

Automatic Automatically displays the best picture format so

the picture is in the correct position. Black lines

may appear at the top/bottom and/or sides.

Full

Displays a picture in the full screen mode. 16:9

signal will be displayed in original proportion.

Other picture formats will be stretched to ﬁll the

screen.

Wide Screen

Displays a 16:9 picture that is stretched horizontally

and vertically.

Super Zoom

Displays a 4:3 picture at a 16:9 size; the picture

is stretched horizontally and vertically and its left

and right edges are enlarged. This crops out some

of the top and bottom of the picture.

Unscaled

Displays a picture in its original resolution in

the middle of screen. If the picture has lower

resolution than the television, there will be black

bars on all four sides of the picture.

4:3

Displays a 16:9 picture at a 4:3 size; the picture is

shortened horizontally. Sidebars appear on both

edges of the screen.

Movie Expand 14:9

Displays a 4:3 picture at a 14:9 size; the picture is

stretched horizontally and vertically. This crops

out some of the top and bottom of the picture.

Sidebars appear on both edges of the screen.

Movie Expand 16:9

Displays a 4:3 picture at a 16:9 size; the picture is

stretched horizontally and vertically. This crops out

some of the top and bottom of the picture.

Note: Depending on the source selected, the aspect ratio offered may differ.

Android Functionality

Speakers

Switch between speakers.

TV speakers

Audio will come from the

television.

External Audio

Audio will come from the external

System

audio device (e.g. soundbar, AV

receiver) when connected via one of

the digital audio outputs.

Note: The volume level at which your set comes on at is the same level it was when turned off.

To enter the Power menu, press the [SOURCE] button and select TV.

Then press the [MENU] button and select Power using the [LEFT/RIGHT

ARROW] buttons and pressing [OK] when selected.

In this menu you can change the settings related to power

consumption and the following modes are available:

Sleep

Lets you set the sleep timer so the television

Timer

automatically switches off after a set amount of

time. Off / 10 / 20 / 30 / 40 / 50 / 60 / 90 / 120

minutes can be selected.

Picture Off

Allows you to turn off the display so that there

is no picture,sound still comes from the speakers.

To turn display back on, press the [STANDBY]

button on the remote control.

Switch

Controls the amount of time the set will continue

Off Timer

without any buttons being pressed on the set or

remote control before going into standby.

Off/ 30 / 60 / 90 / 120 / 150 / 180 / 210 / 240 minutes

can be selected. Default is off.

No Signal

Controls the amount of time the set will continue

to operate auto-

without a signal being received.

power off

Off / 5 / 10 / 15 / 30 / 60 minutes can be selected.

15 minutes is default.

Power

To enter the Power menu, press the [SOURCE] button and select TV. Then press the [MENU] button and

select Power using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.

To enter the Speakers menu, press the [SOURCE] button and select TV. Then press the [MENU] button and

select Speakers using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.

Android Functionality

CI Card

To enter the CI Card menu, press the [SOURCE] button and select TV. Then press the [MENU] button and

select CI Card using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.

Pay per view services require a “smartcard” to be inserted into the

television. If you subscribe to a pay per view service the provider will

issue you with a ‘CAM’ and a “smartcard”.

The CAM can then be inserted into the COMMON INTERFACE PORT (CI

Card In).

This menu allows you to view information and change settings of CAM.

Advanced Options

To enter the Advanced Options menu, press the [SOURCE] button and select TV. Then press the [MENU]

button and select Advanced Options using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when

selected.

In this menu you can change various settings and the following modes are available:

Blue Mute

Changes the background colour to blue when there is no input signal.

Default Channel

Allows you to choose default Digital television channel, which will be displayed

after television is powered on.

Freeview Play

View the Freeview Play Terms and Conditions.

Settings

Subtitle

Select your preferred subtitle language and type.

Auto Sleep

Controls the amount of time the set will continue to operate without any buttons

being pressed on the set or remote control before going into standby.

Options are: Never / 4 / 6 / 8 hours. The default setting is 4 hours.

System Information

Shows system information.

Version Info

Software version of the set.

Note: In the case of poor signal reception, the quality and strength of the signal can be checked here.

Both of these must be at least 90% to ensure reliable reception.

Android Functionality

Note: This function is not currently used in the UK and ROI.

Settings

To enter the Settings menu, press the [SOURCE] button and select TV. Then press the [MENU] button and

select Settings using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.

Within the settings menu it is possible to control a large number of the set functions, including those

listed below:

• Device Name

• Set up your network and internet connections

• Tune in your set

• Change or update your accounts and sign-in details

• Control the apps

• Set device preferences

• Set up remotes and accessories

Note: These settings are the same as those in the Home Page

Settings menu.

Android Functionality

Network & Internet

Network & Internet control and access is located in the Settings menu. To enter this menu option, select

the icon while on the Home Page or press the [MENU] button on the remote control when in television

mode, then go to When selected, the options shown below are available:Settings > Network & Internet.

Wi-Fi

Allows you to enable/disable the built-in Wi-Fi receiver.

See All

Shows the full list of available Wi-Fi networks.

Add new network

Allows you to add Wi-Fi network manually. This is needed in case you set up on your

router or are using an invisible/hidden Wi-Fi network.

Scanning always

Some location apps need to periodically scan other Wi-Fi devices in the area. This

Available

function allows to scan Wi-Fi devices even in case Wi-Fi is turned off.

Wow

Wake on Wi-Fi network. Allows the set to turn on via network control wirelessly.

Wol

Wake on LAN. Allows the set to turn on via network control over LAN connection.

Proxy Settings

Conﬁ gure proxy server for web browser.

IP settings

Conﬁ gure a wired network.

A wired LAN connection allows you to access the Internet and your home network, this is the

recommended method of connection as it allows for reliable and fast connection to your network. This is

also known an as an Ethernet cable connection or RJ45.

When connecting your router to the set via a cable, use the ethernet port on the rear of the television.

After connecting the LAN cable, your set should connect to the internet automatically if DHCP is activated

on your router. To set up your router you will have to refer to the instruction manual that was supplied

with the device or talk to your broadband supplier.

If you need to set up a static IP address for the television, you will need to follow these steps:

1. Press the [HOME] button, then select Settings > Network & Internet > IP settings > Static.

2. Now follow the on-screen instructions and ﬁ ll in correct IP Address, Gateway, Network preﬁ x length

and DNS.

Connecting to a Network

Connecting to a Network Using a LAN Cable

Android Functionality

Termékspecifikációk

Márka:	Sharp
Kategória:	televízió
Modell:	50BL3KA

Szüksége van segítségre?

Ha segítségre van szüksége Sharp 50BL3KA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók televízió Sharp

Sharp 70GL4360E Útmutató

9 Április 2025

Sharp 37EM33S Útmutató

6 Április 2025

Sharp 40BG5E Útmutató

28 Március 2025

Sharp 49BG5E Útmutató

27 Március 2025

Sharp 32FI4EA Útmutató

18 Március 2025

Sharp 40AG6EE Útmutató

18 Március 2025

Sharp 32CF4E Útmutató

13 Január 2025

Sharp 32CF5E Útmutató

13 Január 2025

Sharp 40BJ5E Útmutató

13 Január 2025

Sharp 43BL3EA Útmutató

13 Január 2025

Útmutatók televízió

Legújabb útmutatók televízió

Toshiba 14N31D Útmutató

10 Április 2025

Lenco DVL-2483W Útmutató

10 Április 2025

Hisense 43A6K Útmutató

10 Április 2025

Philips 14pt2694 Útmutató

9 Április 2025

Daewoo KR21V1TS Útmutató

9 Április 2025

Philips 65PUL5924 Útmutató

9 Április 2025

Philips 55PUL5924 Útmutató

9 Április 2025

Panasonic Viera TX-L32D28 Útmutató

9 Április 2025

Panasonic TX-L24C5B Útmutató

9 Április 2025

Panasonic TX-24E302B Útmutató

9 Április 2025