Használati útmutató SE Electronics X1 A

SE Electronics mikrofon X1 A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót SE Electronics X1 A (20 oldal) a mikrofon kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
X1 A
U s e r M a n u a l
2
User Manual - EN
Thank you
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few minutes
to read the instructions below carefully. We hope you will enjoy working with it as much as we
enjoyed designing and building it for you.
Most Sincerely,
Your sE Team
Brief Description
The X1 A is high quality condenser microphone intended for a wide range of studio applications,
from vocals to drums to acoustic instruments and beyond. Thanks to its custom design and
carefully-selected capsule, it delivers pristine sound quality and an even, well-balanced frequency
response.
The electronics and the switchable attenuation pad ensure a high dynamic range, with high sound
pressure level (SPL) handling capability and extremely low-noise components. The switchable low
cut filter eliminates rumble or footfall noise, and can also compensate for an excess of bass
frequencies caused by the proximity effect. This enables the X1 A to close-mic many instruments
including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by
the roadworthy all-metal design, robust construction, and high quality manufacturing standards.
What’s in the box
Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
X1 A microphone
microphone stand clip
thread adapt er
Controls
The X1 A features a switch for the attenuation pad and a switch for the low-cut filter.
Attenuation Switch
The is located on the front-left side of the Attenuation Switch
microphone. When switched on, the incoming signal is
reduced by 20 dB for capturing of loud instruments and/or
close-miking without distortion. Using the switch also helps
prevent overloading the input stage of recording interfaces,
mixing desks and microphone preamps.
3
Low-Cut Switch
The Low-Cut Switch is located on the front-right side of the
microphone. Wind noise, plosives, footfall noise or rumble
might affect the recorded signal, so enabling the switchable
low cut filter reduces such unwanted noise and prevents
distortion. Additionally, the low cut filter also minimizes the
proximity effect when recording sound sources at a very
short distance.
Powering
In order to ensure proper operation, the microphone requires a phantom power source providing 48
Volts according to IEC 61938.
Risk of damage
Do not connect the microphone to any power supply other than a
phantom power source (input with phantom power or external IEC
standard phantom power supply) with a floating connector, using a
balanced cable with studio grade connectors to IEC 268-12 only. This
is the only way to ensure safe and reliable operation.
Safety and maintenance
Risk of damage
Please make sure that the piece of equipment to which your
microphone will be connected fulfils the safety regulations enforced in
your country and is fitted with a ground lead.
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specifications
Capsule
2/3“ condenser capsule
Polar patterns
Cardioid
Frequency range
20 20,000 Hz –
Sensitivity
20 mV/Pa - dBV 34
Max. SPL (0.5% THD)
130 / 150 dBSPL (0/20 dB Attenuation pad)
Equivalent noise level
16 dB(A)
Dynamic range
114 / 134 dB (0/20 dB Attenuation pad)
Signal- -noise ratio to
78 dB(A)
Low cut filter
1 Hz, 6 dB/Oct, switchable 00

Termékspecifikációk

Márka: SE Electronics
Kategória: mikrofon
Modell: X1 A

Szüksége van segítségre?

Ha segítségre van szüksége SE Electronics X1 A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mikrofon SE Electronics

SE Electronics

SE Electronics V7 BFG Útmutató

3 Szeptember 2024
SE Electronics

SE Electronics V7 V3 Útmutató

3 Szeptember 2024
SE Electronics

SE Electronics V2 Switch Útmutató

30 Augusztus 2024
SE Electronics

SE Electronics T1 Útmutató

29 Augusztus 2024
SE Electronics

SE Electronics DM2 TNT Útmutató

29 Augusztus 2024
SE Electronics

SE Electronics sE4100 Útmutató

29 Augusztus 2024
SE Electronics

SE Electronics V7 MC2 Útmutató

28 Augusztus 2024
SE Electronics

SE Electronics V7 MC1 Útmutató

28 Augusztus 2024
SE Electronics

SE Electronics VR2 Útmutató

28 Augusztus 2024
SE Electronics

SE Electronics Harp Blaster HB52 Útmutató

28 Augusztus 2024

Útmutatók mikrofon

Legújabb útmutatók mikrofon

Comica

Comica VP3 Útmutató

2 Április 2025
Atlas Sound

Atlas Sound MWHHM Útmutató

2 Április 2025
Synco

Synco G2A1 Útmutató

2 Április 2025
Synco

Synco PX Útmutató

2 Április 2025
Synco

Synco MC3 LITE Útmutató

2 Április 2025
Synco

Synco G2A2 Útmutató

2 Április 2025
Synco

Synco G1A1 Útmutató

2 Április 2025
Synco

Synco G1 Pro Útmutató

2 Április 2025
Synco

Synco G2 Max Útmutató

2 Április 2025
Samson

Samson Concert XD2 Útmutató

30 Március 2025