Használati útmutató Samsung CS-53140TS

Samsung televízió CS-53140TS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Samsung CS-53140TS (8 oldal) a televízió kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
English - 1
➢The actual configuration of your TV may be different,
depending on your model.
Connection Panel (depending on the model)
COLOR TELEVISION
CS21K40
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
➢The actual configuration of your TV may be different,
depending on your model.
Control Panel (depending on the model)
◆You can use the buttons to switch the TV on when it is3
in standby mode depending on the model.
◆The 2 3and buttons also have the same function as the
œ √ † …/ / / buttons on the remote control.
◆If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1On-screen menu display
2Volume adjustment
3Channel selection
4Remote control sensor
5Standby indicator
6Power on/off
AA68-03808E-01
☛Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1( - /AUDIO L R) and 2(VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The 3(headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
Front (or Side) Panel
Audio input
Video input
Headphone jack
cable television
network
Rear Panel
☛Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1(75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART connectors are used for equipment, such as a2
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player.
The SCART is also used for equipment with an RGB2
output, such as a video game device or video disc player.
continued...
or
Connecting to the RCA Output
The RCA connectors are used for equipment, such as a4
recording VCR or audio system.
Connecting to the RCA Input
The RCA connectors are used for equipment, such as a3
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player. (When using the mono equipment, connect
to the AUDIO-L input connector.)
The RCA connectors are used for equipment such as a5
DVD with component output (480i only).
English - 2
4
4
4
4
4/
Used to increase or
decrease the volume.
5
5
5
5
5MENU
Used to display the on-
screen menu or return to
the previous menu.
6
6
6
6
6…
…
…
…
…
/ †
†
†
†
†
/ œ
œ
œ
œ
œ
/ √
√
√
√
√
Used to control the
cursor in the menu.
7
7
7
7
7S.MENU
Used to display the
sound menu.
8
8
8
8
8TURBO
Used to select the turbo
sound option.
9
9
9
9
9P.SIZE
Used to change the
screen size.
0
0
0
0
0DUAL I-II (option)
Used to select the
sound mode.
!
!
!
!
!SOURCE
Used to display all of the
available video sources.
@
@
@
@
@INFO
Used to view the
channel information and
setting status you
selected.
#
#
#
#
#PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
$
$
$
$
$P /
Used to display the next
or previous stored
channel.
%
%
%
%
%EXIT
Used to exit from any
display or return to
normal viewing.
^
^
^
^
^MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
&
&
&
&
&ENTER
While using the on-
screen menus, press the
ENTER button to
activate (or change) a
particular item.
*
*
*
*
*S.MODE (option)
Used to select the
sound effect.
(
(
(
(
(P.MODE
Used to select the
picture effect.
)
)
)
)
)TV
Used to return to the TV
mode when it is in
external input mode.
a
a
a
a
aSLEEP
Used to select a preset
time interval for
automatic shut off.
1
1
1
1
1POWER
Used to switch the TV
on and off.
2
2
2
2
2Numeric buttons
Used to select channels
directly.
3
3
3
3
3
-/--
Used to select a channel
numbered ten or over.
Press this button, then
“
--
” symbol is
displayed. Enter the
two-digit channel
number.
➢Operation of remote control may be affected by bright
artificial light near to the TV.
Remote Control
(depending on the model)
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+”
and “
-
” ends of the batteries are
inserted correctly or the batteries are drained.
➢Do not mix battery types, i.e. alkaline and manganese.
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 IPress the “ ” button (On/Off) on the front (or side) of the
television.
3Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” or “Channel - Manual
Store” on page 4.
➢If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Function - Plug & Play” on page 3.
4To switch the television off, press the “ I” button (On/Off)
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2To switch the television back on, simply press it again.
☛Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode
English - 3
5When the channel
searching has finished, the
Time menu is displayed
with Clock selected.
6Press the œ √or button to move to the hour or minute.
Set the hour or minute by pressing the … †or button.
7When you have finished,
press the MENU button.
The ENJOY YOUR WATCHING is displayed, and then the
channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜… †/
( / /Function) ➜œ √ …➜†
( /Plug & Play) ➜œ √
Viewing the Menus
1Press the MENU button.
The main menu is displayed on the screen. Its left side
has four icons: Picture Sound Channel, , , and
Function.
2Press the … †or button to select one of the icons.
Press the button to access the icon’s sub-menu.œ √or
3Press the … †or button to move to items in the menu.
Press the button to enter items in the menu.œ √or
4Press the … † œ √/ / / button to change the selected
items. Press the button to return to the previousMENU
menu.
5Press the EXIT button to exit from the menu.
Function - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1If the television is in standby
mode, press the POWER
button on the remote control.
The Plug & Play is displayed. It flickers for a little
while, and then menu is displayed.Language
2Select the appropriated
language by pressing the
… †or button. Press the
MENU button.
The Ant. Input Check
is displayed.
➢If any language is not
selected, the language
menu will disappear about 30 seconds later.
3Make sure that the antenna is connected to the
television (refer to page 1).
4Press the œ √or button to
search the channels. The
searching starts. To stop the
search, press the MENU
button.
continued...
Plug & Play
Time
Clock -- : -- am
Move Exit
ENJOY YOUR WATCHING
Function
Language : English
Time √
√
√
√
√
Plug & Play √
√
√
√
√
Blue Screen : Off
Child Lock √
√
√
√
√
Low Noise Amp : Off
Select Enter Exit
Ant. Input Check
Auto Store Exit
P 1
471 MHz 48%
Exit
Adjust Select
LANGUAGE
ENGLISH
FRANÇAIS
TÜRKÇE

Termékspecifikációk

Márka: Samsung
Kategória: televízió
Modell: CS-53140TS

Szüksége van segítségre?

Ha segítségre van szüksége Samsung CS-53140TS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók televízió Samsung

Samsung

Samsung CS21B570EO Útmutató

29 Március 2025
Samsung

Samsung CS29M21PQ Útmutató

28 Március 2025
Samsung

Samsung CS-29Z40PQ Útmutató

28 Március 2025
Samsung

Samsung QA55QN90DAW Útmutató

26 Március 2025
Samsung

Samsung QN85LS03BAF Útmutató

16 Március 2025
Samsung

Samsung QE75Q83BAT Útmutató

16 Március 2025
Samsung

Samsung QE55Q83BAT Útmutató

16 Március 2025
Samsung

Samsung QN85QN85BAF Útmutató

16 Március 2025
Samsung

Samsung QN65QN90BAF Útmutató

16 Március 2025
Samsung

Samsung UA55MU7351K Útmutató

15 Január 2025

Útmutatók televízió

Legújabb útmutatók televízió

LG

LG OLED77T4PUA Útmutató

1 Április 2025
Grundig

Grundig Cinaro MF 72-5310 8 DOLBY Útmutató

31 Március 2025
Philips

Philips 28pw9308 Útmutató

31 Március 2025
Philips

Philips 42PF9956 Útmutató

31 Március 2025
Dual

Dual DL-TQL32R1-001 Útmutató

31 Március 2025
Philips

Philips 28pw6332 Útmutató

30 Március 2025
Odys

Odys Multi TV 700 Move Útmutató

30 Március 2025
JTC

JTC NEMESIS SOUND 5.5N UHD Smart Útmutató

30 Március 2025
Daewoo

Daewoo 2130NT Útmutató

29 Március 2025
HKC

HKC HKC 32C9A-EU Útmutató

29 Március 2025